2907780

https://www.phoenixcontact.com/gb/products/2907780 Digital display - FA MCR-FD-TUI-UI-2REL-UP - 2907780 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Multifunctional process indicator in field housing for monitoring and displaying analog measurement data. Universal inputs permit connection of current, voltage, RTDs, and TCs. Two relay change-over contact outputs and one analog output. Product Description Multifunctional process indicator in field housing for monitoring and displaying analog measurement data. Dual-conductor sensors can be powered with the integrated measuring transducer supply. Universal inputs permit connection of current, voltage, RTDs, and TCs. Limit values can be monitored and relays can be switched. The analog output allows you to transmit process signals. A color change in the event of a fault supports the detection of alarm conditions. 5-digit, 7-segment LC display, with backlight, 1 universal input, 2 relays, min./max. value memory, linearization table, digital status output (open collector) Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626232140 Weight per Piece (excluding packing) 1,439.100 g Custom tariff number 90291000 Country of origin Germany Technical data Dimensions Width 199 mm Height 160 mm Depth 96 mm Ambient conditions Ambient temperature (operation) -40 °C ... 50 °C (The readability of the display is no longer guaranteed at temperatures below -30 °C (-22 °F).) Ambient temperature (storage/transport) -40 °C ... 85 °C Maximum altitude < 2000 m (Above sea level) Degree of protection IP67 04/17/2018   Page 1 / 6 https://www.phoenixcontact.com/gb/products/2907780 Digital display - FA MCR-FD-TUI-UI-2REL-UP - 2907780 Technical data Input data Description of the input Universal input Number of inputs 1 Current input signal 0 mA ... 20 mA +10 % 4 mA ... 20 mA +10 % Max. input current < 150 mA Input signal Current Input resistance current input 10 Ω Transmitter supply voltage > 16 V (22 mA) Transmitter supply voltage range 22.8 V ... 27.6 V (No-load) Transmitter supply current < 30 mA (Short-circuit and overload protection) Available input sources Resistance thermometers Sensor types (RTD) that can be used Pt, Ni, Cu sensors Connection technology 2, 3, 4-wire Description of the input Universal input Voltage input signal 0 V ... 10 V 2 V ... 10 V 0 V ... 5 V 0 V ... 1 V 1 V ... 5 V -1 V ... 1 V -10 V ... 10 V -30 V ... 30 V -100 mV ... 100 mV max. input voltage ± 35 V (≥ 1 V) Input signal Voltage Input resistance of voltage input > 1 MΩ Available input sources Thermocouples Sensor types that can be used (TC) J, K, T, N, B, S, R, U. L, C, D Output data Output name Current output Number of outputs 1 Configurable/programmable Yes Current output signal 0 mA ... 20 mA 4 mA ... 20 mA Max. output current < 22 mA Load/output load current output ≤ 500 Ω (22 mA) Ripple < 10 mVPP (500 Ω) D/A resolution 13 bit Output name Voltage output Voltage output signal 0 V ... 10 V 04/17/2018   Page 2 / 6 https://www.phoenixcontact.com/gb/products/2907780 Digital display - FA MCR-FD-TUI-UI-2REL-UP - 2907780 Technical data Output data 2 V ... 10 V 0 V ... 5 V 1 V ... 5 V Max. output voltage < 11 V Ripple < 10 mVPP (1000 Ω) D/A resolution 13 bit Switching output Output name Relay output Contact type 2 PDT Minimum switching voltage 12 V Maximum switching voltage 30 V DC (3 A) 230 V AC (3 A) Min. switching current 10 mA Output name Transistor output, active Output description Open collector output Number of outputs 1 Contact type Transistor Maximum switching voltage 28 V Max. switching current 3A 200 mA Power supply Supply voltage range 24 V AC/DC ... 230 V AC/DC (-20 % ... +10 %, 50 Hz ... 60 Hz) Power consumption ≤ 6.9 W General Test voltage 2500 V Protection class II Overvoltage category II Degree of pollution 2 Test voltage input/output 500 V Test voltage input/power supply 2500 V Test voltage output/power supply 2500 V Noise emission IEC 61326, class A Noise immunity IEC 61326 / NAMUR NE 21 Housing material PBT GF30 Mounting position Max. viewing angle range +/- 45° from the centre line of the display in every direction Conformance CE-compliant UL, USA/Canada UL 61010 Recognized CSA CSA GP 04/17/2018   Page 3 / 6 https://www.phoenixcontact.com/gb/products/2907780 Digital display - FA MCR-FD-TUI-UI-2REL-UP - 2907780 Technical data Standards and Regulations Noise emission IEC 61326, class A Noise immunity IEC 61326 / NAMUR NE 21 Conformance CE-compliant UL, USA/Canada UL 61010 Recognized CSA CSA GP Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Block diagram Pictogram Sensor / Field PWR 1.1 IN+ OUT IN 2-wire US US US 1.4 Out IOut I+ 1.4 4-wire Out I- 2.4 >1V Out U+ 1.3 4-wire 2.4 Out UOut U+ 2.3 4-wire Out U- 2.4 1.3 2.3 R.13 R.13 R.22 2.3 2.4 R.21 4.1 1.1 4.2 1.2 4.3 4.4 1.4 2x 2.1 2.2 4.3 + Passive 4.4 R.12 R.12 R.11 R.11 - POWER U,I DI OUT IN R.22 R.23 2.4 R.21 2.2 2.3 2.4 2x DI R.23 2.1 Power 24V...230V AC/DC U,I POWER L/+ N/PE Classifications eCl@ss eCl@ss 4.0 27210301 eCl@ss 4.1 27210301 eCl@ss 5.0 27210301 eCl@ss 5.1 27210301 eCl@ss 6.0 27210301 eCl@ss 7.0 27210301 eCl@ss 8.0 27210301 eCl@ss 9.0 27210301 ETIM ETIM 2.0 EC001426 ETIM 3.0 EC001426 ETIM 4.0 EC001426 04/17/2018   Page 4 / 6 https://www.phoenixcontact.com/gb/products/2907780 Digital display - FA MCR-FD-TUI-UI-2REL-UP - 2907780 Classifications ETIM ETIM 5.0 EC001426 ETIM 6.0 EC001426 UNSPSC UNSPSC 13.2 39121522 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/  2879105 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 198586 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 198586 EAC      RU CDE.A*30.B.01082 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories Mounting material 04/17/2018   Page 5 / 6 https://www.phoenixcontact.com/gb/products/2907780 Digital display - FA MCR-FD-TUI-UI-2REL-UP - 2907780 Accessories Mounting kit - FA MCR-FD-PM - 2908739 Tube mounting set for FA MCR-FD-TUI-UI-2REL-UP (2907780) and FA MCR-EX-FD-TUI-UI-2REL-UP (2907781) multifunctional process displays. Can also be used for simplified wall mounting.     Programming adapter Programming adapter - MCR-PAC-T-USB - 2309000 Programming adapter with USB and T port interface, 2.4 m for programming FA MCR-..., MCR-...-LP-..., and MCR-...HT-... modules     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 04/17/2018   Page 6 / 6