2907865

VAL-SEC-T2-2+0-48DC-FM - Type 2 surge arrester 2907865 https://www.phoenixcontact.com/us/products/2907865 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Pluggable surge protective device, in accordance with Type 2/Class II, for DC power sources with linear operating characteristics, with remote indication contact. Your advantages • Surge protection family for universal use with optimum energy coordination from the lightning current arrester to the device protection • Easy to maintain due to consistently pluggable protection modules • Excellent level of information provided by mechanical/visual status indicator and remote indication contact • More space in the control cabinet due to the narrow overall width of just 12 mm per position Commercial data Item number 2907865 Packing unit 1 pc Minimum order quantity 1 pc Sales key CL01 Product key CL1353 Catalog page Page 58 (C-4-2019) GTIN 4055626244587 Weight per piece (including packing) 209.6 g Weight per piece (excluding packing) 206.6 g Customs tariff number 85363090 Country of origin DE Jan 8, 2024, 9:12 AM Page 1 (8) VAL-SEC-T2-2+0-48DC-FM - Type 2 surge arrester 2907865 https://www.phoenixcontact.com/us/products/2907865 Technical data Product properties IEC test classification II T2 EN type T2 IEC power supply system DC Type DIN rail module, two-section, divisible Product type Surge arrester Product family SEC Family Number of positions 2 Surge protection fault message Optical, remote indicator contact Insulation characteristics Overvoltage category III Pollution degree 2 Electrical properties Nominal frequency fN 50 Hz (60 Hz) Nominal voltage UN 48 V DC ... 60 V DC Indicator/remote signaling Connection name Remote fault indicator contact Switching function Changeover contact Operating voltage 5 V AC ... 250 V AC (Altitude ≤ 2000 m amsl) 5 V AC ... 150 V AC (Altitude > 2000 m amsl) 125 V DC (200 mA DC) Operating current 5 mA AC ... 1 A AC 1 A DC (30 V DC) Connection data Connection method Screw connection Screw thread M5 Tightening torque 4.5 Nm Stripping length 16 mm Conductor cross section flexible 2.5 mm² ... 16 mm² Conductor cross section rigid 2.5 mm² ... 25 mm² Conductor cross section AWG 12 ... 4 Connection method Fork-type cable lug Conductor cross section flexible 1.5 mm² ... 6 mm² Remote fault indicator contact Connection method Plug-in/screw connection via COMBICON Screw thread M2 Tightening torque 0.25 Nm Jan 8, 2024, 9:12 AM Page 2 (8) VAL-SEC-T2-2+0-48DC-FM - Type 2 surge arrester 2907865 https://www.phoenixcontact.com/us/products/2907865 Stripping length 7 mm Conductor cross section flexible 0.14 mm² ... 1.5 mm² Conductor cross section rigid 0.14 mm² ... 1.5 mm² Conductor cross section AWG 28 ... 16 Dimensions Dimensional drawing Width 25.4 mm Height 97.9 mm Depth 74.5 mm (incl. DIN rail 7.5 mm) Horizontal pitch 1.4 Div. Material specifications Flammability rating according to UL 94 V-0 CTI value of material 600 Insulating material PA6.6-FR 20% GF PBT-FR Material group I Housing material PA 6.6-FR 20 % GF PBT-FR Protective circuit Mode of protection (DC+) - (DC-) (DC+) - PE (DC-) - PE Direction of action (DC+/DC-) - PE Nominal voltage UN 60 V AC (TN) 48 V DC ... 60 V DC Nominal frequency fN 50 Hz (60 Hz) Maximum continuous voltage UC 75 V DC 75 V AC Rated load current IL 40 A (Biconnect M4 fork-type cable lug 6 mm²) 63 A (TWIN ferrule 2 x 10 mm²) Residual current IPE ≤ 50 µA DC ≤ 450 µA AC Nominal discharge current In (8/20) µs 20 kA Maximum discharge current Imax (8/20) µs 40 kA Impulse discharge current (10/350) µs, charge 2 As Impulse discharge current (10/350) µs, specific energy 4 kJ/Ω Impulse discharge current (10/350) µs, peak value limp 4 kA Total discharge current Itotal (8/20) µs 40 kA Short-circuit current rating ISCCR 0.2 kA DC (without backup fuse) 6 kA DC (for 20 A gG/B backup fuse) 10 kA AC (C63 A miniature circuit breaker) Jan 8, 2024, 9:12 AM Page 3 (8) VAL-SEC-T2-2+0-48DC-FM - Type 2 surge arrester 2907865 https://www.phoenixcontact.com/us/products/2907865 25 kA AC (for a backup fuse of up to 315 A gG) 50 kA AC (for a backup fuse of up to 200 A gG) Voltage protection level Up (DC+) - (DC-) ≤ 0.9 kV Voltage protection level Up (DC+/DC-) - PE ≤ 0.5 kV Response time tA ≤ 25 ns Max. backup fuse with V-type through wiring 20 A DC (gG / B at ISCCR > 200 A) Max. backup fuse with branch wiring 20 A DC (gG / B at ISCCR > 200 A) 315 A AC (gG) Environmental and real-life conditions Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 °C ... 80 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Altitude ≤ 6000 m (amsl) Permissible humidity (operation) 5 % ... 95 % Shock (operation) 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation) 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) Approvals UL specifications Short-circuit current rating (SCCR) 50 kA Voltage protection rating VPR (DC+) - (DC-) 800 V Voltage protection rating VPR (DC+) - G 400 V Voltage protection rating VPR (DC-) - G 400 V Nominal discharge current In 20 kA Mode of protection (DC+) - (DC-) (DC+) - G (DC-) - G Nominal voltage 60 V DC Power distribution system DC SPD Type 1 UL indicator/remote signaling Operating voltage 125 V AC AC operating current 1 A AC UL connection data Tightening torque 30 lbf-in. Conductor cross section AWG 10 ... 2 Standards and regulations Standards/specifications IEC 61643-11 Note 2011 Jan 8, 2024, 9:12 AM Page 4 (8) VAL-SEC-T2-2+0-48DC-FM - Type 2 surge arrester 2907865 https://www.phoenixcontact.com/us/products/2907865 EN 61643-11 Standards/specifications EN 61643-11 Note 2012 Mounting Mounting type DIN rail mounting Jan 8, 2024, 9:12 AM Page 5 (8) VAL-SEC-T2-2+0-48DC-FM - Type 2 surge arrester 2907865 https://www.phoenixcontact.com/us/products/2907865 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/2907865  cUL Recognized  UL Recognized Approval ID: FILE E 330181 Approval ID: FILE E 330181  EAC  DNV GL Approval ID: RU C-DE.*09.B.00169 Approval ID: TAE000023D UAE-RoHS Approval ID: 23-10-88707 cULus Recognized Jan 8, 2024, 9:12 AM Page 6 (8) VAL-SEC-T2-2+0-48DC-FM - Type 2 surge arrester 2907865 https://www.phoenixcontact.com/us/products/2907865 Classifications ECLASS ECLASS-11.0 27130805 ECLASS-13.0 27171302 ETIM ETIM 9.0 EC000941 UNSPSC UNSPSC 21.0 39121600 Jan 8, 2024, 9:12 AM Page 7 (8) VAL-SEC-T2-2+0-48DC-FM - Type 2 surge arrester 2907865 https://www.phoenixcontact.com/us/products/2907865 Environmental product compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 9:12 AM Page 8 (8)