2907879

VAL-SEC-T2-220DC-P - Type 2 surge protection plug 2907879 https://www.phoenixcontact.com/us/products/2907879 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Replacement plug for surge protective devices from the VALVETRAB SEC product range for DC power sources. Your advantages • Surge protection family for universal use with optimum energy coordination from the lightning current arrester to the device protection • Easy to maintain due to consistently pluggable protection modules • Excellent level of information provided by mechanical/visual status indicator and remote indication contact • Extremely narrow design, just 12 mm per position • Varistor arrester with a low leakage current Commercial data Item number 2907879 Packing unit 1 pc Minimum order quantity 1 pc Note Made to order (non-returnable) Sales key CL01 Product key CL1353 Catalog page Page 58 (C-4-2019) GTIN 4055626245041 Weight per piece (including packing) 61.2 g Weight per piece (excluding packing) 47.35 g Customs tariff number 85363090 Country of origin DE Jan 8, 2024, 9:12 AM Page 1 (10) VAL-SEC-T2-220DC-P - Type 2 surge protection plug 2907879 https://www.phoenixcontact.com/us/products/2907879 Technical data Product properties IEC test classification II T2 EN type T2 IEC power supply system DC Type Male Product type Replacement plug Product family SEC Family Number of positions 1 Surge protection fault message optical Insulation characteristics Overvoltage category III Pollution degree 2 Electrical properties Nominal voltage UN 200 V DC ... 220 V DC Connection data Connection method pluggable Dimensions Dimensional drawing Width 11.7 mm Height 46.4 mm Depth 59.4 mm Horizontal pitch 0.6 Div. Material specifications Flammability rating according to UL 94 V-0 CTI value of material 600 Insulating material PA6.6-FR 20% GF PBT-FR Material group I Housing material PA 6.6-FR 20 % GF PBT-FR Protective circuit Mode of protection (DC+) - (DC-) (DC+/DC-) - PE Direction of action (DC+/DC-) - PE Nominal voltage UN 200 V DC ... 220 V DC Jan 8, 2024, 9:12 AM Page 2 (10) VAL-SEC-T2-220DC-P - Type 2 surge protection plug 2907879 https://www.phoenixcontact.com/us/products/2907879 Maximum continuous voltage UC 250 V DC Residual current IPE ≤ 5 µA DC Nominal discharge current In (8/20) µs 20 kA Maximum discharge current Imax (8/20) µs 40 kA Impulse discharge current (10/350) µs, charge 0.5 As Impulse discharge current (10/350) µs, specific energy 0.25 kJ/Ω Impulse discharge current (10/350) µs, peak value limp 1 kA Short-circuit current rating ISCCR 0.2 kA (without backup fuse) 6 kA (for 20 A gG/B backup fuse) Voltage protection level Up ≤ 1.5 kV Residual voltage Ures ≤ 1.5 kV (at In) ≤ 1.3 kV (at 10 kA) ≤ 1.2 kV (at 5 kA) ≤ 1.1 kV (at 4 kA) ≤ 1 kV (at 2 kA) TOV behavior at UT 320 V DC (5 s / withstand mode) Response time tA ≤ 25 ns Max. backup fuse with V-type through wiring 20 A (gG / B at ISCCR > 200 A) Max. backup fuse with branch wiring 20 A (gG / B at ISCCR > 200 A) Additional technical data Maximum continuous voltage UC 264 V AC (for operation in safety lighting systems) Environmental and real-life conditions Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 °C ... 80 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Altitude ≤ 6000 m (amsl) Permissible humidity (operation) 5 % ... 95 % Shock (operation) 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation) 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) Approvals UL specifications Maximum continuous operating voltage MCOV 250 V DC Nominal discharge current In 20 kA Mode of protection (DC+) - G (DC-) - G Nominal voltage 220 V DC Power distribution system DC Measured limiting voltage MLV 1640 V SPD Type 4CA Jan 8, 2024, 9:12 AM Page 3 (10) VAL-SEC-T2-220DC-P - Type 2 surge protection plug 2907879 https://www.phoenixcontact.com/us/products/2907879 Standards and regulations Standards/specifications IEC 61643-11 Note 2011 EN 61643-11 Standards/specifications EN 61643-11 Note 2012 Mounting Mounting type on base element Jan 8, 2024, 9:12 AM Page 4 (10) VAL-SEC-T2-220DC-P - Type 2 surge protection plug 2907879 https://www.phoenixcontact.com/us/products/2907879 Drawings Circuit diagram Dimensional drawing 11,7 52,3 59,4 46,4 Jan 8, 2024, 9:12 AM Page 5 (10) VAL-SEC-T2-220DC-P - Type 2 surge protection plug 2907879 https://www.phoenixcontact.com/us/products/2907879 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/2907879  cUL Recognized  UL Recognized  Approval ID: FILE E 330181 Approval ID: FILE E 330181 EAC Approval ID: RU C-DE.*09.B.00169 UAE-RoHS Approval ID: 23-10-88707 cULus Recognized Jan 8, 2024, 9:12 AM Page 6 (10) VAL-SEC-T2-220DC-P - Type 2 surge protection plug 2907879 https://www.phoenixcontact.com/us/products/2907879 Classifications ECLASS ECLASS-11.0 27130890 ECLASS-13.0 27171292 ETIM ETIM 9.0 EC002496 UNSPSC UNSPSC 21.0 39121600 Jan 8, 2024, 9:12 AM Page 7 (10) VAL-SEC-T2-220DC-P - Type 2 surge protection plug 2907879 https://www.phoenixcontact.com/us/products/2907879 Environmental product compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Jan 8, 2024, 9:12 AM Page 8 (10) VAL-SEC-T2-220DC-P - Type 2 surge protection plug 2907879 https://www.phoenixcontact.com/us/products/2907879 Accessories EML (20XE)R - Label 0803452 https://www.phoenixcontact.com/us/products/0803452 Label, Roll, white, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, lettering field size: continuous x 20 mm, Number of individual labels: 1 EML (20XE)R YE - Label 0803453 https://www.phoenixcontact.com/us/products/0803453 Label, Roll, yellow, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, lettering field size: continuous x 20 mm, Number of individual labels: 1 Jan 8, 2024, 9:12 AM Page 9 (10) VAL-SEC-T2-220DC-P - Type 2 surge protection plug 2907879 https://www.phoenixcontact.com/us/products/2907879 B-STIFT - Marker pen 1051993 https://www.phoenixcontact.com/us/products/1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 9:12 AM Page 10 (10)