2908283

QUINT4-BUFFER/24DC/40 - Buffer module 2908283 https://www.phoenixcontact.com/us/products/2908283 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. QUINT buffer module with maintenance-free capacitor-based energy storage for DIN rail mounting, input: 24 V DC, output: 24 V DC/40 A, including mounted UTA 107 universal DIN rail adapter. Product description Bridge failures lasting several seconds with the buffer modules from the QUINT range for DIN rails. The QUINT BUFFER combines an electronic switch-over unit and maintenance-free, capacitor-based energy storage in the same housing. Your advantages • Space savings, thanks to the compact design • Maintenance-free due to electrolytic capacitors • Thanks to soft start, can also be used with power supplies in the low power range Commercial data Item number 2908283 Packing unit 1 pc Minimum order quantity 1 pc Sales key CM21 Product key CMUIE3 Catalog page Page 345 (C-4-2019) GTIN 4055626309200 Weight per piece (including packing) 1,416 g Weight per piece (excluding packing) 1,328 g Customs tariff number 85322900 Country of origin CN Jan 8, 2024, 9:13 AM Page 1 (10) QUINT4-BUFFER/24DC/40 - Buffer module 2908283 https://www.phoenixcontact.com/us/products/2908283 Technical data Input data Input voltage range 22.5 V DC ... 30 V DC Fixed backup threshold < 22 V DC Voltage type of supply voltage DC Current consumption Imax (UN, IOUT = IStat.Boost, Icharge = max) 46 A (max.) Current consumption INo-Load(UN, IOUT = 0, Icharge = 0) 0.2 A (No-load) Current consumption Icharge (UN, IOUT = 0, Icharge = max) 0.8 A (charging process) Buffer time 0.2 s (40 A) 2 s (4 A) Output data Efficiency > 98 % (with charged energy storage device) Connection in parallel no Connection in series No Mains operation Output voltage 24 V DC (depending on the input voltage) Output current IN 40 A Power loss nominal load max. 40 °C Derating: 0.56 %/K / > 60 °C Derating: 2.5 %/K) Ambient temperature (storage/transport) -40 °C ... 70 °C Ambient temperature (start-up type tested) -40 °C Maximum altitude ≤ 4000 m Climatic class 3K3 (in acc. with EN 60721) Max. permissible relative humidity (operation) ≤ 95 % Standards and regulations Electrical safety Standard designation Electrical safety Standards/specifications IEC 60950-1/VDE 0805 (SELV) Approvals UL Identification UL Listed UL 508 UL Identification UL/C-UL Recognized UL 60950-1 EMC data Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC EMC requirements for noise emission EN 61000-6-3 EN 61000-6-4 EMC requirements for noise immunity EN 61000-6-1 EN 61000-6-2 Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Noise emission EN 55016 EN 61000-6-3 Electrostatic discharge Standards/regulations EN 61000-4-2 Electrostatic discharge Contact discharge 6 kV (Test Level 3) Discharge in air 8 kV (Test Level 3) Comments Criterion A Electromagnetic HF field Standards/regulations EN 61000-4-3 Electromagnetic HF field Frequency range 80 MHz ... 6 GHz Jan 8, 2024, 9:13 AM Page 4 (10) QUINT4-BUFFER/24DC/40 - Buffer module 2908283 https://www.phoenixcontact.com/us/products/2908283 Test field strength 10 V/m Comments Criterion A Fast transients (burst) Standards/regulations EN 61000-4-4 Fast transients (burst) Input 2 kV (Test Level 3 - asymmetrical) Output 2 kV (Test Level 3 - asymmetrical) Signal 2 kV (Test Level 3 - asymmetrical) Comments Criterion A Surge voltage load (surge) Input 1 kV (Test Level 2 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Output 1 kV (Test Level 2 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Signal 1 kV (Test Level 2 - asymmetrical) Comments Criterion A Conducted interference Standards/regulations EN 61000-4-6 Conducted interference Frequency range 0.15 MHz ... 80 MHz Comments Criterion A Voltage 10 V Criteria Criterion A Normal operating behavior within the specified limits. Criterion B Temporary impairment to operational behavior that is corrected by the device itself. Jan 8, 2024, 9:13 AM Page 5 (10) QUINT4-BUFFER/24DC/40 - Buffer module 2908283 https://www.phoenixcontact.com/us/products/2908283 Drawings Block diagram + + - 1.1 2.1 Inrush 3.1 1.2 3.2 2.2 = = Charge = Discharge = C 3.3 3.4 13 UIn OK 14 Ready SGnd Jan 8, 2024, 9:13 AM Page 6 (10) QUINT4-BUFFER/24DC/40 - Buffer module 2908283 https://www.phoenixcontact.com/us/products/2908283 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/2908283  cUL Recognized  UL Recognized  Approval ID: FILE E 211944 Approval ID: FILE E 211944 EAC Approval ID: RU S-DE.BL08.W.00764  UL Listed  cUL Listed  cUL Listed  UL Listed Approval ID: FILE E 123528 Approval ID: FILE E 123528 Approval ID: FILE E 199827 Approval ID: FILE E 199827 cULus Recognized cULus Listed cULus Listed Jan 8, 2024, 9:13 AM Page 7 (10) QUINT4-BUFFER/24DC/40 - Buffer module 2908283 https://www.phoenixcontact.com/us/products/2908283 Classifications ECLASS ECLASS-11.0 27040692 ECLASS-12.0 27040692 ECLASS-13.0 27040692 ETIM ETIM 9.0 EC002850 UNSPSC UNSPSC 21.0 26111700 Jan 8, 2024, 9:13 AM Page 8 (10) QUINT4-BUFFER/24DC/40 - Buffer module 2908283 https://www.phoenixcontact.com/us/products/2908283 Environmental product compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 25; For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Jan 8, 2024, 9:13 AM Page 9 (10) QUINT4-BUFFER/24DC/40 - Buffer module 2908283 https://www.phoenixcontact.com/us/products/2908283 Accessories UWA 130 - Mounting adapter 2901664 https://www.phoenixcontact.com/us/products/2901664 2-piece universal wall adapter for securely mounting the device in the event of strong vibrations. The profiles that are screwed onto the side of the device are screwed directly onto the mounting surface. The universal wall adapter is attached on the left/right. UWA 182/52 - Mounting adapter 2938235 https://www.phoenixcontact.com/us/products/2938235 Universal wall adapter for securely mounting the device in the event of strong vibrations. The device is screwed directly onto the mounting surface. The universal wall adapter is attached on the top/bottom. Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 9:13 AM Page 10 (10)