2908501

https://www.phoenixcontact.com/gb/products/2908501 Relay Module - RIF-1-RSC-LDP-12DC/2X21 - 2908501 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact type: 2 changeover contacts. Input voltage: 12 V DC Key Commercial Data Packing unit 10 STK GTIN GTIN 4055626306230 Weight per Piece (excluding packing) 69.000 g Custom tariff number 85364110 Country of origin China Note Made to Order (non-returnable) Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 16 mm Height 89 mm Depth 75 mm Ambient conditions Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 12 V DC Input voltage range in reference to UN see diagram 08/13/2018   Page 1 / 11 https://www.phoenixcontact.com/gb/products/2908501 Relay Module - RIF-1-RSC-LDP-12DC/2X21 - 2908501 Technical data Coil side Typical input current at UN 33 mA Typical response time 8 ms Typical release time 10 ms Coil voltage 12 V DC Protective circuit Damping diode Operating voltage display Yellow LED Contact side Contact type 2 PDT Type of switch contact Single contact Contact material AgNi Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V (at 10 mA) Min. switching current 10 mA (At 5 V) Maximum inrush current 25 A (20 ms, N/O contact) Limiting continuous current 8 A (see diagram) Interrupting rating (ohmic load) max. 192 W (at 24 V DC) 96 W (at 48 V DC) 60 W (at 60 V DC) 44 W (at 110 V DC) 57 W (at 220 V DC) 2000 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.2 A (at 250 V, DC13) 3 A (at 24 V, AC15) 3 A (at 120 V, AC15) 3 A (at 250 V, AC15) Connection data input side Connection name Coil side Connection method Screw connection Stripping length 8 mm Conductor cross section solid 0.5 mm² ... 4 mm² Conductor cross-section solid (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² Conductor cross section flexible 0.5 mm² ... 4 mm² 0.5 mm² ... 4 mm² (Ferrule with plastic sleeve) Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² 0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve) Conductor cross section AWG 20 ... 10 (solid) 20 ... 12 (flexible) Torque 0.5 Nm ... 0.6 Nm 08/13/2018   Page 2 / 11 https://www.phoenixcontact.com/gb/products/2908501 Relay Module - RIF-1-RSC-LDP-12DC/2X21 - 2908501 Technical data Connection data output side Connection name Contact side Connection method Screw connection Stripping length 8 mm Conductor cross section solid 0.5 mm² ... 4 mm² Conductor cross-section solid (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² Conductor cross section flexible 0.5 mm² ... 4 mm² 0.5 mm² ... 4 mm² (Ferrule with plastic sleeve) Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² 0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve) Conductor cross section AWG 20 ... 10 (solid) 20 ... 12 (flexible) Torque 0.5 Nm ... 0.6 Nm General Type of note Notes on operation Note FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21) Test voltage relay winding/relay contact 4 kVrms (50 Hz, 1 min.) Test voltage PDT/PDT 2.5 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection IP20 (Relay base) RT III (Relay) Mechanical service life approx. 3x 10 cycles Mounting position any Assembly instructions In rows with zero spacing 7 Standards and Regulations Standards/regulations DIN EN 50178 Rated surge voltage 6 kV Insulation Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts. Degree of pollution 2 Overvoltage category III Flammability rating according to UL 94 V2 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 08/13/2018   Page 3 / 11 https://www.phoenixcontact.com/gb/products/2908501 Relay Module - RIF-1-RSC-LDP-12DC/2X21 - 2908501 22 12 24 14 21 11 Diagram Coil voltage U/UN Circuit diagram A1+ A2- DC coils 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 1,0 0,9 0,8 0,7 0,6 20 30 40 80 50 60 70 Ambient temperature [°C] DC coils AC coils Operating voltage range Diagram Diagram 11 10 20 9 1 6 4 2 4 1 2 3 0,5 0,3 0,2 0,1 10 1 2 3 4 20 30 50 70 100 200 Switching voltage [V] AC, ohmic load DC, ohmic load, contacts in series DC, ohmic load DC, L/R = 40 ms Interrupting rating 300 Limiting continuous current per contact [A] Switching current [A] 10 8 7 6 5 4 3 2 1 20 30 40 7 10 6 80 DC coil AC coil Contact derating Diagram 10 50 60 70 Ambient temperature [°C] Diagram Reduction factor Cycles 1 0,9 1 10 10 5 2 0,8 0,7 0,6 0,5 0,4 4 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Switching current [A] 0,3 1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 COS j 1 250 V AC, ohmic load (DC coils) 2 250 V AC, ohmic load (AC coils) Electrical service life Service life reduction factor 08/13/2018   Page 4 / 11 https://www.phoenixcontact.com/gb/products/2908501 Relay Module - RIF-1-RSC-LDP-12DC/2X21 - 2908501 Articles in set Relay base - RIF-1-BSC/2X21 - 2900930 RIF-1... relay base, for miniature power relay with 1 or 2 changeover contacts or identical solid-state relays, screw connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5     Single relay - REL-MR- 12DC/21-21 - 2961257 Plug-in miniature power relay, with power contact, 2 PDTs, input voltage 12 V DC     Plug-in module - RIF-LDP-12-24 DC - 2900939 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 12 ... 24 V DC ±20 %     Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     Classifications eCl@ss eCl@ss 5.0 27371601 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 08/13/2018   Page 5 / 11 https://www.phoenixcontact.com/gb/products/2908501 Relay Module - RIF-1-RSC-LDP-12DC/2X21 - 2908501 Classifications ETIM ETIM 4.0 EC001437 ETIM 5.0 EC001437 ETIM 6.0 EC001437 UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39122334 Approvals Approvals Approvals DNV GL / EAC Ex Approvals Approval details DNV GL  EAC    http://exchange.dnv.com/tari/  TAA000018V    RU CDE.A*30.B.01082 Accessories Accessories End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     Insulating sleeve 08/13/2018   Page 6 / 11 https://www.phoenixcontact.com/gb/products/2908501 Relay Module - RIF-1-RSC-LDP-12DC/2X21 - 2908501 Accessories Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     08/13/2018   Page 7 / 11 https://www.phoenixcontact.com/gb/products/2908501 Relay Module - RIF-1-RSC-LDP-12DC/2X21 - 2908501 Accessories Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 2-6 BU - 3036932 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 2-6 GY - 3032237 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray     08/13/2018   Page 8 / 11 https://www.phoenixcontact.com/gb/products/2908501 Relay Module - RIF-1-RSC-LDP-12DC/2X21 - 2908501 Accessories Plug-in bridge - FBS 2-8 - 3030284 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 2-8 BU - 3032567 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 2-8 GY 7042 - 3032541 Bridge for potential distribution     Marker carriers Marker carriers - STP 5-2 - 0800967 Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4 can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm     08/13/2018   Page 9 / 11 https://www.phoenixcontact.com/gb/products/2908501 Relay Module - RIF-1-RSC-LDP-12DC/2X21 - 2908501 Accessories Zack marker strip - ZB 15:UNBEDRUCKT - 0811972 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm     Marker for terminal blocks - UC-TM 16 - 0819217 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID, BLUEMARK ID COLOR, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 10.5 mm     Marker for terminal blocks - UC-TMF 16 - 0819262 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID, BLUEMARK ID COLOR, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 5.1 mm     Test plug terminal block Test plugs - MPS-MT - 0201744 , rated voltage (III/2): , nominal current (Ex): , nominal voltage (Ex): , number of positions: 1, pitch: 5 mm, connection method: , mounting: ,     Spare parts Relay base - RIF-1-BSC/2X21 - 2900930 RIF-1... relay base, for miniature power relay with 1 or 2 changeover contacts or identical solid-state relays, screw connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5     08/13/2018   Page 10 / 11 https://www.phoenixcontact.com/gb/products/2908501 Relay Module - RIF-1-RSC-LDP-12DC/2X21 - 2908501 Accessories Single relay - REL-MR- 12DC/21-21 - 2961257 Plug-in miniature power relay, with power contact, 2 PDTs, input voltage 12 V DC     Plug-in module - RIF-LDP-12-24 DC - 2900939 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 12 ... 24 V DC ±20 %     Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 08/13/2018   Page 11 / 11