2908798

https://www.phoenixcontact.com/gb/products/2908798 Current transducers - MCR-S-20-100-UI-DCI - 2908798 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) MCR current measuring transducer, programmable and configurable, for measuring direct, alternating and distorted currents, input current 0...20 to 0...100 A, unconfigured Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626343662 Weight per Piece (excluding packing) 162.000 g Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 22.5 mm Height 99 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Maximum altitude < 2000 m Input data Input Current measuring input Configurable/programmable Yes, unconfigured 04/17/2018   Page 1 / 4 https://www.phoenixcontact.com/gb/products/2908798 Current transducers - MCR-S-20-100-UI-DCI - 2908798 Technical data Input data Input current range 0 A AC ... 100 A AC (± 100 A DC) Operate threshold 1 % (of measuring range nominal value 100 A) Setting range for min. input current 0 A ... 19 A Setting range for max. input current 0 A ... 100 A Impulse form AC, DC or distorted currents Overload capacity Depending on through connected conductor Surge strength Depending on through connected conductor Frequency measuring range 15 Hz ... 400 Hz Connection method Through connection, diameter 10.5 mm Output data Output name Voltage output / current output Configurable/programmable Yes, unconfigured Voltage output signal 0 V ... 10 V 5 V ... 1 V 5 V ... -5 V 2 V ... 10 V -10 V ... 10 V 0 V ... 5 V 1 V ... 5 V -5 V ... 5 V 10 V ... 0 V 10 V ... 2 V 10 V ... -10 V 5 V ... 0 V Current output signal 0 mA ... 20 mA 4 mA ... 20 mA 20 mA ... 0 mA 20 mA ... 4 mA Load/output load voltage output > 10 kΩ Load/output load current output < 500 Ω Switching output Output name No switching output Power supply Supply voltage range 20 V DC ... 30 V DC Max. current consumption < 40 mA (without load) Connection data Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² 04/17/2018   Page 2 / 4 https://www.phoenixcontact.com/gb/products/2908798 Current transducers - MCR-S-20-100-UI-DCI - 2908798 Technical data Connection data Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Stripping length 8 mm Screw thread M3 General Maximum transmission error < 0.5 % (of nominal range value under nominal conditions) Temperature coefficient, typical < 0.025 %/K Step response (10-90%) 330 ms (AC) 40 ms (DC) Status display Green LED Overvoltage category III Degree of pollution 2 Rated insulation voltage 300 V AC (to earth) Test voltage input/output 4 kV (50 Hz, 1 min.) Test voltage input/power supply 4 kV (50 Hz, 1 min.) Test voltage output/power supply 500 V (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 Color green Housing material Polyamide PA non-reinforced Mounting position any Conformance CE-compliant UL, USA/Canada Class I, Zone 2, AEx nA nC IIC T4, Ex nA nC IIC T4 Gc X Class I, Div. 2, Groups A, B, C and D or Non-Hazardous Locations Only Standards and Regulations Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 Low Voltage Directive Conformance with Low Voltage Directive Conformance CE-compliant UL, USA/Canada Class I, Zone 2, AEx nA nC IIC T4, Ex nA nC IIC T4 Gc X Class I, Div. 2, Groups A, B, C and D or Non-Hazardous Locations Only Drawings 04/17/2018   Page 3 / 4 https://www.phoenixcontact.com/gb/products/2908798 Current transducers - MCR-S-20-100-UI-DCI - 2908798 Block diagram ADC IN DAC µC OUT SPAN DAC ZERO I Po wer U = 9 O UT I 10 O UT U 11 GND 2 12 GND 2 13 24VDC 14 GND 1 15 NC 16 GND 1 Classifications eCl@ss eCl@ss 5.0 27210190 eCl@ss 5.1 27210190 eCl@ss 6.0 27210190 eCl@ss 7.0 27210123 eCl@ss 8.0 27210123 eCl@ss 9.0 27210123 ETIM ETIM 3.0 EC002475 ETIM 4.0 EC002475 ETIM 5.0 EC002475 ETIM 6.0 EC002475 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121032 Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 04/17/2018   Page 4 / 4