2909521

https://www.phoenixcontact.com/us/products/2909521 Relay Module - PLC-RSC-230UC/21HC/EX - 2909521 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2. Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4055626363493 Weight per Piece (excluding packing) 82.000 g Custom tariff number 85364900 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 14 mm Height 80 mm Depth 94 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C (UL) -40 °C ... 55 °C (ATEX / IECEx) Ambient temperature (storage/transport) -40 °C ... 85 °C 05/30/2020   Page 1 / 14 https://www.phoenixcontact.com/us/products/2909521 Relay Module - PLC-RSC-230UC/21HC/EX - 2909521 Technical data Ambient conditions Degree of protection RT II (Relay) IP20 (Relay base) Coil side Nominal input voltage UN 230 V AC 220 V DC Typical input current at UN 4.5 mA Typical response time 7 ms Typical release time 10 ms Protective circuit Bridge rectifier Bridge rectifier Operating voltage display Yellow LED Power dissipation for nominal condition 1.04 W Contact side Contact type 1 PDT Type of switch contact Single contact Contact material AgNi Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) Minimum switching voltage 12 V (at 10 mA) Min. switching current 10 mA (at 12 V) Maximum inrush current 30 A (300 ms) Limiting continuous current 10 A 6 A (value applies to connections 12. If connections 12 are bridged, the normal value applies.) Interrupting rating (ohmic load) max. 240 W (at 24 V DC) 58 W (at 48 V DC) 48 W (at 60 V DC) 50 W (at 110 V DC) 80 W (at 220 V DC) 2500 VA (for 250 V AC) Interrupting rating (ohmic load) max. bridged 144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.) 1500 VA (for 250 V AC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.) Switching capacity 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.2 A (at 250 V, DC13) 05/30/2020   Page 2 / 14 https://www.phoenixcontact.com/us/products/2909521 Relay Module - PLC-RSC-230UC/21HC/EX - 2909521 Technical data Contact side 6 A (at 24 V, AC15) 6 A (at 120 V, AC15) 6 A (at 250 V, AC15) General Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Flammability rating according to UL 94 V0 (Housing) Mechanical service life 3x 10 cycles Mounting position any Assembly instructions In rows with zero spacing 7 Connection data Connection name Coil side Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² 0.2 mm² ... 2.5 mm² (Single ferrule) 2x 0.5 mm² ... 1.5 mm² (TWIN ferrule) Conductor cross section AWG 26 ... 14 Connection data 2 Connection name Contact side Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² 0.2 mm² ... 2.5 mm² (Single ferrule) 2x 0.5 mm² ... 1.5 mm² (TWIN ferrule) Conductor cross section AWG 26 ... 14 Standards and Regulations Designation Standards/regulations Standards/regulations IEC 60664 EN 50178 EN 60079-0, -7, -15 05/30/2020   Page 3 / 14 https://www.phoenixcontact.com/us/products/2909521 Relay Module - PLC-RSC-230UC/21HC/EX - 2909521 Technical data Standards and Regulations Rated insulation voltage 250 V AC Rated surge voltage 6 kV Insulation Safe isolation, reinforced insulation Pollution degree 2 Overvoltage category III Conformance CE-compliant ATEX  II 3G Ex ec nC IIC T4 Gc IECEx Ex ec nC IIC T4 Gc UL, USA Class I, Zone 2, AEx nA nC IIC T6 UL, USA/Canada Class I, Div. 2, Groups A, B, C, D UL, Canada Class I, Zone 2, Ex nA nC IIC Gc T6 X Conformance/approvals Designation CE Identification CE-compliant Designation ATEX Identification  II 3G Ex ec nC IIC T4 Gc Certificate IBExU16ATEXB015 X Designation IECEx Identification Ex ec nC IIC T4 Gc Certificate IECEx IBE 16.0029X Designation UL, USA Identification Class I, Zone 2, AEx nA nC IIC T6 Designation UL, USA/Canada Identification Class I, Div. 2, Groups A, B, C, D Designation UL, Canada Identification Class I, Zone 2, Ex nA nC IIC Gc T6 X Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 05/30/2020   Page 4 / 14 https://www.phoenixcontact.com/us/products/2909521 Relay Module - PLC-RSC-230UC/21HC/EX - 2909521 Diagram Curve A Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data) Curve B Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data) 05/30/2020   Page 5 / 14 https://www.phoenixcontact.com/us/products/2909521 Relay Module - PLC-RSC-230UC/21HC/EX - 2909521 Diagram Interrupting rating 05/30/2020   Page 6 / 14 https://www.phoenixcontact.com/us/products/2909521 Relay Module - PLC-RSC-230UC/21HC/EX - 2909521 Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27371601 eCl@ss 5.0 27371600 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 ETIM 4.0 EC001437 ETIM 5.0 EC001437 05/30/2020   Page 7 / 14 https://www.phoenixcontact.com/us/products/2909521 Relay Module - PLC-RSC-230UC/21HC/EX - 2909521 Classifications ETIM ETIM 6.0 EC001437 ETIM 7.0 EC001437 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39122334 UNSPSC 18.0 39122334 UNSPSC 19.0 39122334 UNSPSC 20.0 39122334 UNSPSC 21.0 39122334 Approvals Approvals Approvals DNV GL Ex Approvals IECEx / ATEX / UL Listed / cUL Listed / EAC Ex / cULus Listed Approval details DNV GL    https://approvalfinder.dnvgl.com/  TAE0000196-03 Accessories Accessories Bridge 05/30/2020   Page 8 / 14 https://www.phoenixcontact.com/us/products/2909521 Relay Module - PLC-RSC-230UC/21HC/EX - 2909521 Accessories Continuous plug-in bridge - FBST 500-PLC RD - 2966786 Continuous plug-in bridge, length: 500 mm, color: red     Continuous plug-in bridge - FBST 500-PLC BU - 2966692 Continuous plug-in bridge, length: 500 mm, color: blue     Continuous plug-in bridge - FBST 500-PLC GY - 2966838 Continuous plug-in bridge, length: 500 mm, color: gray     Single plug-in bridge - FBST 6-PLC RD - 2966236 Single plug-in bridge, length: 6 mm, number of positions: 2, color: red     Single plug-in bridge - FBST 6-PLC BU - 2966812 Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue     05/30/2020   Page 9 / 14 https://www.phoenixcontact.com/us/products/2909521 Relay Module - PLC-RSC-230UC/21HC/EX - 2909521 Accessories Single plug-in bridge - FBST 6-PLC GY - 2966825 Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray     Single plug-in bridge - FBST 8-PLC GY - 2967688 Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray     Single plug-in bridge - FBST 14-PLC BK - 2967691 Single plug-in bridge, length: 14 mm, number of positions: 2, color: black     DIN rail DIN rail, unperforated - NS 35/ 7,5 V2A UNPERF 2000MM - 0801377 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Stainless steel V2A, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     05/30/2020   Page 10 / 14 https://www.phoenixcontact.com/us/products/2909521 Relay Module - PLC-RSC-230UC/21HC/EX - 2909521 Accessories DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     05/30/2020   Page 11 / 14 https://www.phoenixcontact.com/us/products/2909521 Relay Module - PLC-RSC-230UC/21HC/EX - 2909521 Accessories DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     Labeled terminal marker Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10     Partition plate Separating plate - PLC-ATP BK - 2966841 Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation     Power module 05/30/2020   Page 12 / 14 https://www.phoenixcontact.com/us/products/2909521 Relay Module - PLC-RSC-230UC/21HC/EX - 2909521 Accessories Power terminal block - PLC-ESK GY - 2966508 Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Terminal marking Zack marker strip - ZB10/WH-100:UNBEDRUCKT - 5060883 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 1000     Zack marker strip - ZB 10:UNBEDRUCKT - 1053001 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 12 - 0819194 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40     05/30/2020   Page 13 / 14 https://www.phoenixcontact.com/us/products/2909521 Relay Module - PLC-RSC-230UC/21HC/EX - 2909521 Accessories Marker for terminal blocks - UCT-TM 12 - 0829144 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm, Number of individual labels: 30     Spare parts Single relay - REL-MR-110DC/21HC/EX - 2908823 Plug-in miniature power relay, RT III sealed with power contacts, 1 changeover contact, input voltage: 110 V DC, in connection with the corresponding PLC base approved in accordance with ATEX/IECEx (zone 2) and Ex zone class I, div. 2.     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 05/30/2020   Page 14 / 14