https://www.phoenixcontact.com/gb/products/2909680
Relay Module - PLC-RPT-230UC/ 1AU/MS/SEN - 2909680
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PLC-INTERFACE for input functions, consisting of PLC-BPT.../SEN basic terminal block with Push-in
connection and plug-in miniature relay with multi-layer gold contact and manual operation, 1 N/O contact, 230
V AC/220 V DC input voltage
Key Commercial Data
Packing unit
10 STK
GTIN
GTIN
4055626378121
Weight per Piece (excluding packing)
31.270 g
Custom tariff number
85364900
Country of origin
Germany
Note
Made to Order (non-returnable)
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
6.2 mm
Height
80 mm
Depth
94 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 55 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Coil side
Nominal input voltage UN
230 V AC
220 V DC
04/17/2018 Page 1 / 11
https://www.phoenixcontact.com/gb/products/2909680
Relay Module - PLC-RPT-230UC/ 1AU/MS/SEN - 2909680
Technical data
Coil side
Typical input current at UN
3.2 mA
Typical response time
7 ms
Typical release time
15 ms
Protective circuit
Bridge rectifier Bridge rectifier
Operating voltage display
Yellow LED
Power dissipation for nominal condition
0.74 W
Contact side
Contact type
1 N/O contact
Type of switch contact
Single contact
Contact material
AgSnO, hard gold-plated
Maximum switching voltage
30 V AC
36 V DC
Minimum switching voltage
100 mV (at 10 mA)
Min. switching current
1 mA (at 24 V)
Maximum inrush current
50 mA
Limiting continuous current
50 mA
Interrupting rating (ohmic load) max.
1 W (at 24 V DC)
Contact side (with destroyed gold layer)
Note
the following values are applicable if a gold layer is destroyed
Maximum switching voltage
250 V AC/DC
Minimum switching voltage
5 V (at 100 mA)
Limiting continuous current
6A
Min. switching current
10 mA (at 12 V)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 60947
2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.1 A (at 220 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)
Connection data input side
Connection name
Coil side
Connection method
Push-in connection
Stripping length
8 mm
04/17/2018 Page 2 / 11
https://www.phoenixcontact.com/gb/products/2909680
Relay Module - PLC-RPT-230UC/ 1AU/MS/SEN - 2909680
Technical data
Connection data input side
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 14
Connection data output side
Connection name
Contact side
Connection method
Push-in connection
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 14
General
Test voltage relay winding/relay contact
4 kV AC (50 Hz, 1 min.)
Operating mode
100% operating factor
Degree of protection
RT II (flux-proof) (Relay)
IP20 (Relay base)
Mechanical service life
1 x 10 cycles
Mounting position
any
Assembly instructions
In rows with zero spacing
7
Standards and Regulations
Designation
Standards/regulations
Standards/regulations
IEC 60664
IEC 60664A
DIN VDE 0110
DIN EN 50178/DIN VDE 0160 (in relevant parts)
DIN EN 50178/VDE 0160
IEC 60255/DIN VDE 0435 (in relevant parts)
Degree of pollution
3
Overvoltage category
III
Flammability rating according to UL 94
V0
Conformance
CE-compliant
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
04/17/2018 Page 3 / 11
https://www.phoenixcontact.com/gb/products/2909680
Relay Module - PLC-RPT-230UC/ 1AU/MS/SEN - 2909680
Diagram
Circuit diagram
U
U N 1,4
1,3
1,2
13
A2
14
BB
A
1,1
UN= 220 V DC / 230 V AC
1
A1
0,9
0,8
B
0,7
20
25
30
35
40
45
50
55
60
65
TU [ ° C]
Curve A
Maximum permissible continuous voltage Umax with limiting continuous
current on the contact side (see relevant technical data)
Curve B
Minimum permissible operate voltage Uop after pre-excitation (see
relevant technical data)
Articles in set
Relay base - PLC-BPT-230UC/ 1/SEN - 2900452
6.2 mm PLC basic terminal block for input functions with push-in connection, without relay or solid-state relay, for
mounting on DIN rail NS 35/7,5, with sensor supply voltage distribution (BB), 1 N/O contact, input voltage 230 V AC/
DC
Classifications
eCl@ss
eCl@ss 5.0
27371601
eCl@ss 5.1
27371601
eCl@ss 6.0
27371601
eCl@ss 7.0
27371601
eCl@ss 8.0
27371601
eCl@ss 9.0
27371601
ETIM
ETIM 2.0
EC001437
ETIM 3.0
EC001437
ETIM 4.0
EC001437
ETIM 5.0
EC001437
ETIM 6.0
EC001437
04/17/2018 Page 4 / 11
https://www.phoenixcontact.com/gb/products/2909680
Relay Module - PLC-RPT-230UC/ 1AU/MS/SEN - 2909680
Classifications
UNSPSC
UNSPSC 13.2
39122334
Approvals
Approvals
Approvals
EAC
Ex Approvals
Approval details
EAC
RU CDE.A*30.B.01082
Accessories
Accessories
Bridge
Continuous plug-in bridge - FBST 500-PLC RD - 2966786
Continuous plug-in bridge, length: 500 mm, color: red
Continuous plug-in bridge - FBST 500-PLC BU - 2966692
Continuous plug-in bridge, length: 500 mm, color: blue
04/17/2018 Page 5 / 11
https://www.phoenixcontact.com/gb/products/2909680
Relay Module - PLC-RPT-230UC/ 1AU/MS/SEN - 2909680
Accessories
Continuous plug-in bridge - FBST 500-PLC GY - 2966838
Continuous plug-in bridge, length: 500 mm, color: gray
Single plug-in bridge - FBST 6-PLC RD - 2966236
Single plug-in bridge, length: 6 mm, number of positions: 2, color: red
Single plug-in bridge - FBST 6-PLC BU - 2966812
Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue
Single plug-in bridge - FBST 6-PLC GY - 2966825
Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray
Single plug-in bridge - FBST 8-PLC GY - 2967688
Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray
Controller board
04/17/2018 Page 6 / 11
https://www.phoenixcontact.com/gb/products/2909680
Relay Module - PLC-RPT-230UC/ 1AU/MS/SEN - 2909680
Accessories
System connection - PLC-V8/FLK14/IN - 2296553
V8 adapter for 8 x PLC-INTERFACE (6.2 mm); Controller: PLC system cabling of input cards; connection 1: Plug
connection; connection 2: 1x IDC/FLK pin strip (14-position); number of channels: 8; control logic: positive switching
System connection - PLC-V8/FLK14/IN/M - 2304115
V8 adapter for 8 x PLC-INTERFACE (6.2 mm); Controller: PLC system cabling of input cards; connection 1: Plug
connection; connection 2: 1x IDC/FLK pin strip (14-position); number of channels: 8; control logic: negative switching
System connection - PLC-V8/D15S/IN - 2296074
V8 adapter for 8 x PLC-INTERFACE (6.2 mm); Controller: PLC system cabling of input cards; connection 1: Plug
connection; connection 2: 1x D-SUB pin strip (15-position); number of channels: 8; control logic: positive switching
System connection - PLC-V8/D15B/IN - 2296087
V8 adapter for 8 x PLC-INTERFACE (6.2 mm); Controller: PLC system cabling of input cards; connection 1: Plug
connection; connection 2: 1x D-SUB socket strip (15-position); number of channels: 8; control logic: positive switching
DIN rail
DIN rail, unperforated - NS 35/ 7,5 V2A UNPERF 2000MM - 0801377
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001,
material: Stainless steel V2A, uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
04/17/2018 Page 7 / 11
https://www.phoenixcontact.com/gb/products/2909680
Relay Module - PLC-RPT-230UC/ 1AU/MS/SEN - 2909680
Accessories
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001,
material: Copper, uncoated, length: 2000 mm, color: copper-colored
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, in acc. with EN 60715: 2001,
material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001,
material: Aluminum, uncoated, length: 2000 mm, color: silver
04/17/2018 Page 8 / 11
https://www.phoenixcontact.com/gb/products/2909680
Relay Module - PLC-RPT-230UC/ 1AU/MS/SEN - 2909680
Accessories
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
Labeled terminal marker
Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 - 10, 11 - 20, etc. up to 491 - 500, mounting type: snap into tall marker groove, for terminal block width:
6.2 mm, lettering field size: 6.15 x 10.5 mm
Partition plate
Separating plate - PLC-ATP BK - 2966841
Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual
separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101,
isolation
Power module
Power terminal block - PLC-ESK GY - 2966508
Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5
Screwdriver tools
04/17/2018 Page 9 / 11
https://www.phoenixcontact.com/gb/products/2909680
Relay Module - PLC-RPT-230UC/ 1AU/MS/SEN - 2909680
Accessories
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm
Zack marker strip - ZB 6/WH-100:UNBEDRUCKT - 5060935
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering
field size: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into tall marker groove, for
terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm
Spare parts
04/17/2018 Page 10 / 11
https://www.phoenixcontact.com/gb/products/2909680
Relay Module - PLC-RPT-230UC/ 1AU/MS/SEN - 2909680
Accessories
Relay base - PLC-BPT-230UC/ 1/SEN - 2900452
6.2 mm PLC basic terminal block for input functions with push-in connection, without relay or solid-state relay, for
mounting on DIN rail NS 35/7,5, with sensor supply voltage distribution (BB), 1 N/O contact, input voltage 230 V AC/
DC
Single relay - REL-MR- 60DC/21AU/MS - 2909647
Plug-in miniature power relay, with multi-layer gold contact, 1 changeover contact, manual operation, 60 V DC input
voltage
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
04/17/2018 Page 11 / 11
