https://www.phoenixcontact.com/gb/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Pre-assembled relay module with Push-in connection, consisting of: relay base, power contact relay, plugin display/interference suppression module, retaining bracket. Contact type: 1 N/O contact, max. switch-on
current up to 130 A peak, 80 A (20 ms) input voltage 24 V DC
Key Commercial Data
Packing unit
10 STK
GTIN
GTIN
4055626405216
Weight per Piece (excluding packing)
69.000 g
Custom tariff number
85364900
Country of origin
China
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
16 mm
Height
93 mm
Depth
75 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Coil side
Nominal input voltage UN
24 V DC
Input voltage range in reference to UN
see diagram
Typical input current at UN
18 mA
08/13/2018 Page 1 / 10
https://www.phoenixcontact.com/gb/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Technical data
Coil side
Typical response time
8 ms
Typical release time
10 ms
Protective circuit
Reverse polarity protection Polarity protection diode
Free-wheeling diode Damping diode
Operating voltage display
Yellow LED
Power dissipation for nominal condition
0.43 W
Contact side
Contact type
1 N/O contact
Type of switch contact
Single contact
Contact material
AgSnO
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for
voltages larger than 250 V (L1, L2, L3) between identical terminal blocks
in adjacent modules. Potential bridging is then carried out with FBST 8PLC... or ...FBST 500...)
Minimum switching voltage
12 V AC/DC (at 100 mA)
Min. switching current
100 mA (at 12 V DC)
Maximum inrush current
80 A (for 20 ms)
130 A (peak, at capacitive load, 230 V AC, 24 μF)
Limiting continuous current
6A
10 A (Value is permissible if connections 11 and 21, as well as
connections 14 and 24 are bridged.)
Interrupting rating (ohmic load) max.
144 W (at 24 V DC)
58 W (at 48 V DC)
48 W (at 60 V DC)
50 W (at 110 V DC)
80 W (at 220 V DC)
85 W (for 250 V DC)
1500 VA (for 250 V AC)
Interrupting rating (ohmic load) max. bridged
240 W (for 24 V DC. The value is permissible if both connections 13,
both connections 14 and both connections BB are bridged.)
2500 VA (for 250 V AC. The value is permissible if both connections 13,
both connections 14 and both connections BB are bridged.)
Switching capacity in acc. with DIN VDE 0660/IEC 60947
2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
6 A (at 24 V, AC15)
6 A (at 120 V, AC15)
6 A (at 250 V, AC15)
Connection data input side
Connection name
Coil side
Connection method
Push-in connection
Stripping length
8 mm
08/13/2018 Page 2 / 10
https://www.phoenixcontact.com/gb/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Technical data
Connection data input side
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on
double terminal block)
Conductor cross section AWG
26 ... 16 (solid)
26 ... 16 (flexible)
Connection data output side
Connection name
Contact side
Connection method
Push-in connection
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on
double terminal block)
Conductor cross section AWG
26 ... 16 (solid)
26 ... 16 (flexible)
General
Type of note
Notes on operation
Note
FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in
bridge for the output side (11/21)
Test voltage relay winding/relay contact
4 kV AC (50 Hz, 1 min.)
Operating mode
100% operating factor
Degree of protection
IP20 (Relay base)
RT III (Relay)
Mechanical service life
3x 10 cycles
Mounting position
any
Assembly instructions
In rows with zero spacing
7
Standards and Regulations
Designation
Standards/regulations
Standards/regulations
IEC 60664
EN 50178
Rated surge voltage
6 kV
Insulation
Safe isolation, reinforced insulation
Degree of pollution
2
Overvoltage category
III
Flammability rating according to UL 94
V2
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
08/13/2018 Page 3 / 10
https://www.phoenixcontact.com/gb/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Technical data
Environmental Product Compliance
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
Circuit diagram
22
12
24
14
21
11
A2-
A1+
Articles in set
Relay base - RIF-1-BPT/2X21 - 2900931
RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in
connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5
Single relay - REL-MR- 24DC/1IC - 2961341
Plug-in miniature power relay, with power contact for high switch-on currents, 1 N/O contact, input voltage 24 V DC
Plug-in module - RIF-LDP-12-24 DC - 2900939
Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity:
A1+, A2-, input voltage: 12 ... 24 V DC ±20 %
08/13/2018 Page 4 / 10
https://www.phoenixcontact.com/gb/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Articles in set
Retaining bracket - RIF-RH-1 - 2900953
Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm
tall miniature power relay and solid-state relay
Classifications
eCl@ss
eCl@ss 5.0
27371601
eCl@ss 5.1
27371600
eCl@ss 6.0
27371600
eCl@ss 7.0
27371601
eCl@ss 8.0
27371601
eCl@ss 9.0
27371601
ETIM
ETIM 2.0
EC001437
ETIM 3.0
EC001437
ETIM 4.0
EC001437
ETIM 5.0
EC001437
ETIM 6.0
EC001437
Approvals
Approvals
Approvals
DNV GL
Ex Approvals
Approval details
DNV GL
http://exchange.dnv.com/tari/
TAA000018V
Accessories
Accessories
End block
08/13/2018 Page 5 / 10
https://www.phoenixcontact.com/gb/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Accessories
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:
gray
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
08/13/2018 Page 6 / 10
https://www.phoenixcontact.com/gb/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Accessories
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-6 - 3030336
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red
Plug-in bridge - FBS 2-6 BU - 3036932
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue
08/13/2018 Page 7 / 10
https://www.phoenixcontact.com/gb/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Accessories
Plug-in bridge - FBS 2-6 GY - 3032237
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray
Plug-in bridge - FBS 2-8 - 3030284
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red
Plug-in bridge - FBS 2-8 BU - 3032567
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 2-8 GY 7042 - 3032541
Bridge for potential distribution
Marker carriers
Marker carriers - STP 5-2 - 0800967
Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4
can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5
Terminal marking
08/13/2018 Page 8 / 10
https://www.phoenixcontact.com/gb/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Accessories
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm
Zack marker strip - ZB 15:UNBEDRUCKT - 0811972
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm
Marker for terminal blocks - UC-TM 16 - 0819217
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID, BLUEMARK ID COLOR,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 16 mm, lettering field size: 15.45 x 10.5 mm
Marker for terminal blocks - UC-TMF 16 - 0819262
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID, BLUEMARK ID COLOR,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 16 mm, lettering field size: 15.45 x 5.1 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
, rated voltage (III/2): , nominal current (Ex): , nominal voltage (Ex): , number of positions: 1, pitch: 5 mm, connection
method: , mounting: ,
Spare parts
08/13/2018 Page 9 / 10
https://www.phoenixcontact.com/gb/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Accessories
Relay base - RIF-1-BPT/2X21 - 2900931
RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in
connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5
Single relay - REL-MR- 24DC/1IC - 2961341
Plug-in miniature power relay, with power contact for high switch-on currents, 1 N/O contact, input voltage 24 V DC
Plug-in module - RIF-LDP-12-24 DC - 2900939
Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity:
A1+, A2-, input voltage: 12 ... 24 V DC ±20 %
Retaining bracket - RIF-RH-1 - 2900953
Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm
tall miniature power relay and solid-state relay
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
08/13/2018 Page 10 / 10