2909885

https://www.phoenixcontact.com/gb/products/2909885 Relay Module - RIF-1-RSC-LDP-24DC/1IC - 2909885 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact type: 1 N/O contact, max. inrush current up to 130 A peak, 80 A (20 ms), 24 V DC input voltage Key Commercial Data Packing unit 10 STK GTIN GTIN 4055626405223 Weight per Piece (excluding packing) 69.470 g Custom tariff number 85364110 Country of origin China Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 16 mm Height 93 mm Depth 75 mm Ambient conditions Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 24 V DC Input voltage range in reference to UN see diagram Typical input current at UN 18 mA 08/13/2018   Page 1 / 10 https://www.phoenixcontact.com/gb/products/2909885 Relay Module - RIF-1-RSC-LDP-24DC/1IC - 2909885 Technical data Coil side Typical response time 8 ms Typical release time 10 ms Protective circuit Reverse polarity protection Polarity protection diode Free-wheeling diode Damping diode Operating voltage display Yellow LED Power dissipation for nominal condition 0.43 W Contact side Contact type 1 N/O contact Type of switch contact Single contact Contact material AgSnO Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8PLC... or ...FBST 500...) Minimum switching voltage 12 V AC/DC (at 100 mA) Min. switching current 100 mA (at 12 V DC) Maximum inrush current 80 A (for 20 ms) 130 A (peak, at capacitive load, 230 V AC, 24 μF) Limiting continuous current 6A 10 A (Value is permissible if connections 11 and 21, as well as connections 14 and 24 are bridged.) Interrupting rating (ohmic load) max. 144 W (at 24 V DC) 58 W (at 48 V DC) 48 W (at 60 V DC) 50 W (at 110 V DC) 80 W (at 220 V DC) 85 W (for 250 V DC) 1500 VA (for 250 V AC) Interrupting rating (ohmic load) max. bridged 240 W (for 24 V DC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.) 2500 VA (for 250 V AC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.2 A (at 250 V, DC13) 6 A (at 24 V, AC15) 6 A (at 120 V, AC15) 6 A (at 250 V, AC15) Connection data input side Connection name Coil side Connection method Screw connection Stripping length 8 mm 08/13/2018   Page 2 / 10 https://www.phoenixcontact.com/gb/products/2909885 Relay Module - RIF-1-RSC-LDP-24DC/1IC - 2909885 Technical data Connection data input side Conductor cross section solid 0.5 mm² ... 4 mm² Conductor cross-section solid (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² Conductor cross section flexible 0.5 mm² ... 4 mm² 0.5 mm² ... 4 mm² (Ferrule with plastic sleeve) Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² 0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve) Conductor cross section AWG 20 ... 10 (solid) 20 ... 12 (flexible) Torque 0.5 Nm ... 0.6 Nm Connection data output side Connection name Contact side Connection method Screw connection Stripping length 8 mm Conductor cross section solid 0.5 mm² ... 4 mm² Conductor cross-section solid (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² Conductor cross section flexible 0.5 mm² ... 4 mm² 0.5 mm² ... 4 mm² (Ferrule with plastic sleeve) Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² 0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve) Conductor cross section AWG 20 ... 10 (solid) 20 ... 12 (flexible) Torque 0.5 Nm ... 0.6 Nm General Type of note Notes on operation Note FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21) Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection IP20 (Relay base) RT III (Relay) Mechanical service life 3x 10 cycles Mounting position any Assembly instructions In rows with zero spacing 7 Standards and Regulations Designation Standards/regulations Standards/regulations IEC 60664 EN 50178 Rated surge voltage 6 kV Insulation Safe isolation, reinforced insulation 08/13/2018   Page 3 / 10 https://www.phoenixcontact.com/gb/products/2909885 Relay Module - RIF-1-RSC-LDP-24DC/1IC - 2909885 Technical data Standards and Regulations Degree of pollution 2 Overvoltage category III Flammability rating according to UL 94 V2 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram 22 12 24 14 21 11 A2- A1+ Articles in set Relay base - RIF-1-BSC/2X21 - 2900930 RIF-1... relay base, for miniature power relay with 1 or 2 changeover contacts or identical solid-state relays, screw connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5     Single relay - REL-MR- 24DC/1IC - 2961341 Plug-in miniature power relay, with power contact for high switch-on currents, 1 N/O contact, input voltage 24 V DC     Plug-in module - RIF-LDP-12-24 DC - 2900939 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 12 ... 24 V DC ±20 %     08/13/2018   Page 4 / 10 https://www.phoenixcontact.com/gb/products/2909885 Relay Module - RIF-1-RSC-LDP-24DC/1IC - 2909885 Articles in set Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     Classifications eCl@ss eCl@ss 5.0 27371601 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 ETIM 4.0 EC001437 ETIM 5.0 EC001437 ETIM 6.0 EC001437 Approvals Approvals Approvals DNV GL / EAC Ex Approvals Approval details DNV GL  EAC    http://exchange.dnv.com/tari/  TAA000018V    RU CDE.A*30.B.01082 08/13/2018   Page 5 / 10 https://www.phoenixcontact.com/gb/products/2909885 Relay Module - RIF-1-RSC-LDP-24DC/1IC - 2909885 Accessories Accessories End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     08/13/2018   Page 6 / 10 https://www.phoenixcontact.com/gb/products/2909885 Relay Module - RIF-1-RSC-LDP-24DC/1IC - 2909885 Accessories Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 2-6 BU - 3036932 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue     08/13/2018   Page 7 / 10 https://www.phoenixcontact.com/gb/products/2909885 Relay Module - RIF-1-RSC-LDP-24DC/1IC - 2909885 Accessories Plug-in bridge - FBS 2-6 GY - 3032237 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray     Plug-in bridge - FBS 2-8 - 3030284 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 2-8 BU - 3032567 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 2-8 GY 7042 - 3032541 Bridge for potential distribution     Marker carriers Marker carriers - STP 5-2 - 0800967 Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4 can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5     Terminal marking 08/13/2018   Page 8 / 10 https://www.phoenixcontact.com/gb/products/2909885 Relay Module - RIF-1-RSC-LDP-24DC/1IC - 2909885 Accessories Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm     Zack marker strip - ZB 15:UNBEDRUCKT - 0811972 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm     Marker for terminal blocks - UC-TM 16 - 0819217 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID, BLUEMARK ID COLOR, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 10.5 mm     Marker for terminal blocks - UC-TMF 16 - 0819262 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID, BLUEMARK ID COLOR, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 5.1 mm     Test plug terminal block Test plugs - MPS-MT - 0201744 , rated voltage (III/2): , nominal current (Ex): , nominal voltage (Ex): , number of positions: 1, pitch: 5 mm, connection method: , mounting: ,     Spare parts 08/13/2018   Page 9 / 10 https://www.phoenixcontact.com/gb/products/2909885 Relay Module - RIF-1-RSC-LDP-24DC/1IC - 2909885 Accessories Relay base - RIF-1-BSC/2X21 - 2900930 RIF-1... relay base, for miniature power relay with 1 or 2 changeover contacts or identical solid-state relays, screw connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5     Single relay - REL-MR- 24DC/1IC - 2961341 Plug-in miniature power relay, with power contact for high switch-on currents, 1 N/O contact, input voltage 24 V DC     Plug-in module - RIF-LDP-12-24 DC - 2900939 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 12 ... 24 V DC ±20 %     Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 08/13/2018   Page 10 / 10