2910123

https://www.phoenixcontact.com/in/products/2910123 DC/DC converters - QUINT4-PS/24DC/48DC/5/PT - 2910123 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Primary-switched DC/DC converter, QUINT, DIN rail mounting, SFB Technology (Selective Fuse Breaking), Push-in connection, input: 24 V DC, output: 48 V DC / 5 A Product Description QUINT DC/DC converter with maximum functionality DC/DC converters alter the voltage level, regenerate the voltage at the end of long cables or enable the creation of independent supply systems by means of electrical isolation. QUINT DC/DC converters magnetically and therefore quickly trip circuit breakers with six times the nominal current, for selective and therefore cost-effective system protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports critical operating states before errors occur. Your advantages  Most powerful output side: easy system expansion, reliable heavy load startup and miniature circuit breaker tripping  Most comprehensive signaling: preventive function monitoring reports critical operating states before errors occur  Available pre-configured: from a batch quantity of just 1 Key Commercial Data Packing unit 1 pc GTIN GTIN 4055626537450 Weight per Piece (excluding packing) 1,024.000 g Custom tariff number 85044030 Country of origin Thailand Technical data Input data Input voltage range 18 V DC ... 32 V DC Electric strength, max. 35 V DC (60 s) Typical current consumption 13.8 A (24 V DC) Mains buffering typ. 16 ms (24 V DC) Switch-on time 48 V constant capacity) Nominal output current (IN) 5A Static Boost (IStat.Boost) 6.25 A Dynamic Boost (IDyn.Boost) 10 A (5 s) Selective Fuse Breaking (ISFB) 30 A (15 ms) Magnetic circuit breaker tripping A1...A6 / B2 / C1...C2 / Z1...Z6 System deviation, static < 3 % (change in load, static 10 % ... 90 %) System deviation, dynamic < 3 % (Dynamic load change 10 % ... 90 %, 10 Hz) System deviation, input voltage change < 0.3 % (change in input voltage ±10 %) Short-circuit-proof yes No-load proof yes Residual ripple < 50 mVPP Connection in parallel Yes, for redundancy and increased capacity Connection in series yes Feedback voltage resistance ≤ 60 V DC Protection against overvoltage at the output (OVP) ≤ 60 V DC 06/17/2020   Page 2 / 14 https://www.phoenixcontact.com/in/products/2910123 DC/DC converters - QUINT4-PS/24DC/48DC/5/PT - 2910123 Technical data Output data Rise time < 1 s (UOUT (10 % ... 90 %)) Output connection data Connection method Push-in connection Stripping length 10 mm Conductor cross section solid 0.2 mm² ... 6 mm² Conductor cross section flexible 0.2 mm² ... 6 mm² Flexible conductor cross section (ferrule with plastic sleeve) 0.2 mm² ... 4 mm² Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) 0.2 mm² ... 4 mm² Conductor cross section AWG 24 ... 10 LED signaling Types of signaling LED Floating signal contact Active signal output Out1 (digital, configurable) Active signal output Out2 (analog, configurable) Remote contact Signal ground SGnd POut > 100 % (LED lights up yellow, output power > 240 W) > 75 % (LED lights up green, output power > 180 W) > 50 % (LED lights up green, output power > 120 W) UOut > 0.9 x USet (LED lights up green) < 0.9 x USet (LED flashes green) UIn > 0.8 x UInNom (LED off) < 0.8 x UInNom (LED lights up yellow) Signal contacts – signal output Out 1 (configurable) Connection labeling 3.5 + Digital 0 V DC 24 V DC 20 mA Default UIN input voltage OK Signal option Output voltage Output current Output power Operating hours Early warning of high temperatures OVP voltage limitation active Signal contacts – signal output Out 2 (configurable) Connection labeling 3.6 + Digital 0 V DC 24 V DC 06/17/2020   Page 3 / 14 https://www.phoenixcontact.com/in/products/2910123 DC/DC converters - QUINT4-PS/24DC/48DC/5/PT - 2910123 Technical data Signal contacts – signal output Out 2 (configurable) 20 mA Default Output power Signal option Output voltage Output current Operating hours Early warning of high temperatures OVP voltage limitation active Analog 4 mA ... 20 mA ±5 % (Load ≤400 ) Signal option Output voltage Output current Output power Signal contacts – signal output relay 13/14 (configurable) Connection labeling 3.1, 3.2 Switch contact floating Maximum contact load 24 V DC 1A 30 V AC 0.5 A Default Output voltage Signal option Output current Output power Operating hours Early warning of high temperatures OVP voltage limitation active UIN input voltage OK Signal contacts – remote signal input (configurable) Connection labeling 3.3 + Function Output power ON/OFF (remote) Default Output power ON (>40 kΩ/24 V DC/open bridge between REM and SGnd) Signal contacts – signal ground SGnd Connection labeling 3.4 + Function Signal ground Reference potential to OUT1, OUT2, REM Signal connection data Connection method Push-in connection Conductor cross section solid 0.2 mm² ... 1 mm² Conductor cross section flexible 0.2 mm² ... 1.5 mm² Flexible conductor cross section (ferrule with plastic sleeve) 0.2 mm² ... 0.75 mm² 06/17/2020   Page 4 / 14 https://www.phoenixcontact.com/in/products/2910123 DC/DC converters - QUINT4-PS/24DC/48DC/5/PT - 2910123 Technical data Signal connection data Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) 0.2 mm² ... 1.5 mm² Conductor cross section AWG 24 ... 16 Stripping length 8 mm Reliability MTBF (IEC 61709, SN 29500) > 1369000 h (25 °C) > 793000 h (40 °C) > 328000 h (60 °C) Life expectancy (electrolytic capacitors) Output current 2.5 A Temperature 40 °C Time 359600 h Voltage 24 V DC Output current 5A Temperature 40 °C Time 176200 h Voltage 24 V DC Output current 5A Temperature 30 °C Time 352500 h Voltage 24 V DC Switching frequency Auxiliary converter stage 190 kHz ... 220 kHz Main converter stage 67 kHz ... 135 kHz General data Degree of protection IP20 Protection class Special with SELV input and output Inflammability class in acc. with UL 94 (housing / terminal blocks) V0 Side element version Aluminum Hood version Stainless steel X6Cr17 Width 50 mm Height 130 mm Depth 125 mm Width with alternative assembly 122 mm Height with alternative assembly 130 mm Depth with alternative assembly 53 mm Weight 0.8 kg Efficiency typ. 94 % (24 V DC) Power dissipation 06/17/2020   Page 5 / 14 https://www.phoenixcontact.com/in/products/2910123 DC/DC converters - QUINT4-PS/24DC/48DC/5/PT - 2910123 Technical data Power dissipation Maximum power dissipation in no-load condition 2000 m, observe derating) Vibration (operation) 5 Hz ... 100 Hz resonance search 2.3g, 90 min., resonance frequency 2.3g, 90 min. (according to DNV GL Class C) Shock 18 ms, 30g, in each space direction (according to IEC 60068-2-27) Degree of pollution 2 Climatic class 3K3 (EN 60721) Overvoltage category EN 61010-1 II Overvoltage category EN 62477-1 III Standards EMC requirements for noise immunity EN 61000-6-1 EN 61000-6-2 EMC requirements, power plant IEC 61850-3 EN 61000-6-5 Standard designation Electrical safety (of control and regulation devices) Standards/regulations IEC 61010-1 Standard designation Safety extra-low voltage Standards/regulations EN 61010-1 (SELV) IEC 61010-2-201 (PELV) Standard designation Mains variation/undervoltage Standards/regulations EN 61000-4-29 Conformance/approvals Designation UL Identification UL Listed UL 61010-1 Designation UL Identification UL Listed UL 61010-2-201 Designation UL Identification UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location) Designation CSA Identification CAN/CSA-C22.2 No. 61010-1-12 Designation CSA Identification CAN/CSA-IEC 61010-2-201:14 06/17/2020   Page 6 / 14 https://www.phoenixcontact.com/in/products/2910123 DC/DC converters - QUINT4-PS/24DC/48DC/5/PT - 2910123 Technical data Conformance/approvals Designation SIQ Identification Type tested (type approved) Designation SIQ Identification CB scheme (IEC 61010-1, IEC 61010-2-201) EMC data Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC Conducted noise emission EN 55016 EN 61000-6-3 (Class B) Noise emission EN 55016 EN 61000-6-3 (Class B) DNV GL conducted interference Class B Additional text Bridge and deck area DNV GL noise radiation Class B Additional text Bridge and deck area Electrostatic discharge EN 61000-4-2 Contact discharge 8 kV (Test Level 4) Discharge in air 15 kV (Test Level 4) Electromagnetic HF field EN 61000-4-3 Frequency range 80 MHz ... 1 GHz Test field strength 20 V/m (Test Level 3) Frequency range 1 GHz ... 6 GHz Test field strength 10 V/m (Test Level 3) Comments Criterion A Fast transients (burst) EN 61000-4-4 Input 2 kV (Test Level 3 - asymmetrical) Output 2 kV (Test Level 3 - asymmetrical) Signal 2 kV (Test Level 4 - asymmetrical) Comments Criterion A Surge voltage load (surge) EN 61000-4-5 Input 1 kV (Test Level 3 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Output 1 kV (Test Level 3 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Signal 2 kV (Test Level 3 - asymmetrical) Comments Criterion A I/O/S asymmetrical Frequency range 0.15 MHz ... 80 MHz Voltage 10 V (Test Level 3) Comments Criterion A 06/17/2020   Page 7 / 14 https://www.phoenixcontact.com/in/products/2910123 DC/DC converters - QUINT4-PS/24DC/48DC/5/PT - 2910123 Technical data EMC data Frequency 16.7 Hz 50 Hz 60 Hz Test field strength 100 A/m Additional text 60 s Comments Criterion A Frequency 50 Hz 60 Hz Test field strength 1 kA/m Additional text 3s Comments Criterion A Frequency 0 Hz Test field strength 300 A/m Additional text DC, 60 s Comments Criterion A Voltage dips EN 61000-4-29 Voltage 24 V DC Voltage dip 70 % Additional text Test Level 2 Comments Criterion A Voltage dip 40 % Additional text Test Level 2 Comments Criterion B Voltage dip 0% Additional text Test Level 2 Comments Criterion B Pulse-shape magnetic field EN 61000-4-9 Test field strength 1000 A/m Comments Criterion A Damped oscillating magnetic field EN 61000-4-10 Test field strength 100 A/m Test level 1 100 kHz Test field strength 100 A/m Test level 2 1 MHz Comments Criterion A Asymmetrical conducted disturbance variables EN 61000-4-16 Test level 1 15 Hz 150 Hz (Test Level 3) Voltage 10 V 1 V Test level 2 150 Hz 1.5 kHz (Test Level 3) Voltage 1V 06/17/2020   Page 8 / 14 https://www.phoenixcontact.com/in/products/2910123 DC/DC converters - QUINT4-PS/24DC/48DC/5/PT - 2910123 Technical data EMC data Test level 3 1.5 kHz 15 kHz (Test Level 3) Voltage 1 V 10 V Test level 4 15 kHz 150 kHz (Test Level 3) Voltage 10 V Test level 5 16.7 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 3) Voltage 10 V (Permanent) Test level 6 0 Hz 16.7 Hz 50 Hz 60 Hz (Test Level 3) Voltage 100 V (1 s) Comments Criterion A Alternating component of DC voltage EN 61000-4-17 Attenuated oscillating wave EN 61000-4-18 Input, output (test level 1) 100 kHz 1 MHz (Test Level 2 - symmetrical) Voltage 0.5 kV Input, output (test level 2) 100 kHz 1 MHz (Test Level 2 - asymmetrical) Voltage 1 kV Input, output (test level 3) 10 MHz (Test Level 2 - asymmetrical) Voltage 0.5 kV Signals (test level 1) 100 kHz 1 MHz (Test Level 2 - symmetrical) Voltage 0.5 kV Signals (test level 2) 100 kHz 1 MHz (Test Level 2 - asymmetrical) Voltage 1 kV Comments Criterion A Criterion A Normal operating behavior within the specified limits. Criterion B Temporary impairment to operational behavior that is corrected by the device itself. Criterion C Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements. Drawings 06/17/2020   Page 9 / 14 https://www.phoenixcontact.com/in/products/2910123 DC/DC converters - QUINT4-PS/24DC/48DC/5/PT - 2910123 Schematic diagram 06/17/2020   Page 10 / 14 https://www.phoenixcontact.com/in/products/2910123 DC/DC converters - QUINT4-PS/24DC/48DC/5/PT - 2910123 Block diagram Diagram 06/17/2020   Page 11 / 14 https://www.phoenixcontact.com/in/products/2910123 DC/DC converters - QUINT4-PS/24DC/48DC/5/PT - 2910123 Diagram Diagram Classifications eCl@ss eCl@ss 9.0 27210901 06/17/2020   Page 12 / 14 https://www.phoenixcontact.com/in/products/2910123 DC/DC converters - QUINT4-PS/24DC/48DC/5/PT - 2910123 Approvals Approvals Approvals CSA / IECEE CB Scheme / cULus Listed / Type approved Ex Approvals cULus Listed Approval details CSA    http://www.csagroup.org/services-industries/product-listing/  70212082 IECEE CB Scheme    http://www.iecee.org/  SI-7708 cULus Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 123528 Type approved      SI-SIQ BG 005/077 Accessories Accessories Assembly adapter Assembly adapters - UWA 182/52 - 2938235 Universal wall adapter for securely mounting the device in the event of strong vibrations. The device is screwed directly onto the mounting surface. The universal wall adapter is attached on the top/bottom.     06/17/2020   Page 13 / 14 https://www.phoenixcontact.com/in/products/2910123 DC/DC converters - QUINT4-PS/24DC/48DC/5/PT - 2910123 Accessories Assembly adapters - UWA 130 - 2901664 2-piece universal wall adapter for securely mounting the device in the event of strong vibrations. The profiles that are screwed onto the side of the device are screwed directly onto the mounting surface. The universal wall adapter is attached on the left/right.     Assembly adapters - QUINT-PS-ADAPTERS7/1 - 2938196 Assembly adapter for QUINT-PS... power supply on S7-300 rail     Programming adapter Programming adapter - TWN4 MIFARE NFC USB ADAPTER - 2909681 Near Field Communication (NFC) programming adapter with USB interface for the wireless configuration of NFCcapable products from PHOENIX CONTACT with software. No separate USB driver is required.     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 06/17/2020   Page 14 / 14