IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user
documentation. Our general terms of use for downloads are valid.
Relay module for VIP I/O-Marshalling base elements. For switching 120 V AC loads up to max.
3 A. Integrated fuse and fuse failure indication. N/O contact or N/C contact can be used.
Product description
Relay module for digital output signals for switching loads with max. 3 A nominal current and a maximum voltage of 120 V AC. The switch contact is
protected by an integrated replaceable 3 A fuse. If the fuse fails, this is indicated by an LED. A plug-in bridge determines whether an N/O contact or
an N/C contact is used. The module is installed on a corresponding VIP I/O-Marshalling base element by means of plug-in contact. Installation in
zone 2, “ec” type of protection is permitted.
Your advantages
• Output blown fuse indication
• Active relay coil indication
• Two-stage progressive release allowing for voltage checks with field-powered devices
• Channel for marking accessories
• Replaceable TE5-style fusing
• 120 V internal marshalling option for connected field device
• Integrated keying reduces possible user error during replacement
• 1 PDT relay with user selectable NO or NC contact
Commercial data
Item number
2910154
Packing unit
1 pc
Note
Made to order (non-returnable)
Sales key
C480
Product key
CK8222
Catalog page
Page 556 (C-5-2017)
GTIN
4055626447285
Weight per piece (including packing)
68.2 g
Weight per piece (excluding packing)
71.2 g
Customs tariff number
85364900
Country of origin
US
Jan 8, 2024, 9:18 AM
Page 1 (15)
IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
Technical data
Product properties
Product type
Relay Module
Product family
VIP I/O-Marshalling
Application
Output function
Operating mode
100% operating factor
Mechanical service life
2x 107 cycles
Insulation characteristics
Overvoltage category
II
Pollution degree
2
Input data
Coil side
Nominal input voltage UN
24 V DC
Input voltage range in reference to UN
0.9 ... 1.1
Typical input current at UN
13.5 mA
Typical response time
5 ms
Typical release time
8 ms
Protective circuit
Reverse polarity protection; Polarity protection diode
Freewheeling diode; Freewheeling diode
Operating voltage display
Yellow LED
Output data
Switching
Contact switching type
1 changeover contact
Type of switch contact
Single contact
Contact connection type
Power contact
Contact material
AgSnO
Maximum switching voltage
120 V AC
Limiting continuous current
3 A (fuse limited)
Maximum inrush current
on request
Min. switching current
10 mA (at 12 V)
Interrupting rating (ohmic load) max.
23 W (at 110 V DC)
360 VA (at 120 V AC)
Connection data
Control circuits
Connection method
Pin strip
Ex data
Jan 8, 2024, 9:18 AM
Page 2 (15)
IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
Safety data
Input voltage Ui
24 V DC
Input current Ii
13.5 mA
Dimensions
Dimensional drawing
Width
10.3 mm
Height
64.2 mm
Depth
72.9 mm
Material specifications
Flammability rating according to UL 94
V0
Environmental and real-life conditions
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-40 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Altitude
≤ 2000 m
Permissible humidity (operation)
0 % ... 95 % (non-condensing)
Approvals
ATEX
Identification
II 3G Ex ec nC IIC T4 Gc
Certificate
Sira 17ATEX4293X
IECEx
Identification
Ex ec nC IIC T4 Gc
Certificate
IECEx SIR 17.0078X
UKEX
Identification
II 3G Ex ec nC IIC T4 Gc
Certificate
PxCIF23UKEX2910153X
UL, USA/Canada
Identification
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC T4
CSA, USA/Canada
Class I, Div. 2, Groups A, B, C, D T4
Jan 8, 2024, 9:18 AM
Page 3 (15)
IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
Identification
Class I, Zone 2, AEx ec nC IIC T4 Gc
Ex ec nC IIC T4 Gc
Standards and regulations
Standards/regulations
IEC 60664
DIN EN 50178
Mounting
Mounting type
Plug-in mounting
Assembly instructions
Plugs into VIP/...BASE...
Mounting position
any
Jan 8, 2024, 9:18 AM
Page 4 (15)
IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
Drawings
Circuit diagram
NO NC
F1
CHn+
CHn-
P2+ P2-
nA nB nC nD
Dimensional drawing
Jan 8, 2024, 9:18 AM
Page 5 (15)
IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/2910154
X
Approval ID: IECEx SIR 17.0078X
ATEX
Approval ID: SIRA 17 ATEX 4293X
CSA
Approval ID: 70134758
IECEx
FM approved
Approval ID: FM19US0089X
CSAus
Approval ID: 70134758
cCSAus
Jan 8, 2024, 9:18 AM
Page 6 (15)
IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
Classifications
ECLASS
ECLASS-11.0
27371601
ECLASS-12.0
27371601
ECLASS-13.0
27371601
ETIM
ETIM 9.0
EC001437
UNSPSC
UNSPSC 21.0
39122300
Jan 8, 2024, 9:18 AM
Page 7 (15)
IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
Environmental product compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the
manufacturer’s declaration available under “Downloads”
Jan 8, 2024, 9:18 AM
Page 8 (15)
IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
Mandatory accessories
VIP/S/D25M/BASE 1-8/L/C/EX - Base module
2906595
https://www.phoenixcontact.com/us/products/2906595
8-channel VIP I/O marshalling base element for universal use. All connections as
screw connection technology. This module with the D-SUB 25 connector is pin
compatible with the Foxboro I/A series DCS.
VIP/MSTB/D50M/BASE/16CH/CX/EX - Base module
2908788
https://www.phoenixcontact.com/us/products/2908788
16-channel VIP I/O marshalling base element for universal use. Plug-in field and
supply terminals available as accessories. Either with screw or Push-in
connection technology. Compatible with the Tricon CX DCS series (D-SUB 50).
Jan 8, 2024, 9:18 AM
Page 9 (15)
IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
VIP/S/MC/BASE 1-8/L/EX - Base module
2906596
https://www.phoenixcontact.com/us/products/2906596
8-channel VIP I/O marshalling base element for universal use. All connections as
screw connection technology. With the COMBICON connector, compatible with
the Honeywell C300 and RUSIO series. Marking for channels 1–8.
VIP/S/MC/BASE 9-16/L/EX - Base module
2906630
https://www.phoenixcontact.com/us/products/2906630
8-channel VIP I/O marshalling base element for universal use. All connections as
screw connection technology. With the COMBICON connector, compatible with
the Honeywell C300 and RUSIO series. Marking for channels 9–16.
Jan 8, 2024, 9:18 AM
Page 10 (15)
IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
VIP/S/MC/BASE 17-24/L/EX - Base module
2907024
https://www.phoenixcontact.com/us/products/2907024
8-channel VIP I/O marshalling base element for universal use. All connections as
screw connection technology. With the COMBICON connector, compatible with
the Honeywell C300 and RUSIO series. Marking for channels 17–24.
VIP/S/MC/BASE 25-32/L/EX - Base module
2907025
https://www.phoenixcontact.com/us/products/2907025
8-channel VIP I/O marshalling base element for universal use. All connections as
screw connection technology. With the COMBICON connector, compatible with
the Honeywell C300 and RUSIO series. Marking for channels 25–32.
Jan 8, 2024, 9:18 AM
Page 11 (15)
IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
VIP/S/MC/BASE 1-8/L/C/EX - Base module
2907186
https://www.phoenixcontact.com/us/products/2907186
8-channel VIP I/O marshalling base element for universal use. All connections as
screw connection technology. With the COMBICON connector, compatible with
the Honeywell C300 and RUSIO series. Marking for channels 1–8 and painting.
VIP/S/MC/BASE 9-16/L/C/EX - Base module
2907187
https://www.phoenixcontact.com/us/products/2907187
8-channel VIP I/O marshalling base element for universal use. All connections as
screw connection technology. With the COMBICON connector, compatible with
the Honeywell C300 and RUSIO series. Marking for channels 9–16 and painting.
Jan 8, 2024, 9:18 AM
Page 12 (15)
IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
VIP/S/MC/BASE 17-24/L/C/EX - Base module
2907209
https://www.phoenixcontact.com/us/products/2907209
8-channel VIP I/O marshalling base element for universal use. All connections as
screw connection technology. With the COMBICON connector, compatible with
the Honeywell C300 and RUSIO series. Marking for channels 17–24 and
painting.
VIP/S/MC/BASE 25-32/L/C/EX - Base module
2907210
https://www.phoenixcontact.com/us/products/2907210
8-channel VIP I/O marshalling base element for universal use. All connections as
screw connection technology. With the COMBICON connector, compatible with
the Honeywell C300 and RUSIO series. Marking for channels 25–32 and
painting.
Accessories
Jan 8, 2024, 9:18 AM
Page 13 (15)
IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
UC-TM 6 - Marker for terminal blocks
0818085
https://www.phoenixcontact.com/us/products/0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with:
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK,
CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 6.2 mm,
lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80
ZB 5,08:UNBEDRUCKT - Zack marker strip
0809793
https://www.phoenixcontact.com/us/products/0809793
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK,
CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 5.08 mm,
lettering field size: 4.98 x 10.5 mm, Number of individual labels: 10
Jan 8, 2024, 9:18 AM
Page 14 (15)
IOA REL 120V DO/BFI/3.0A/EX - Relay Module
2910154
https://www.phoenixcontact.com/us/products/2910154
B-STIFT - Marker pen
1051993
https://www.phoenixcontact.com/us/products/1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and
waterproof, line thickness 0.5 mm
FUSE/TE5/3.15A/F-10PCS - Fuse set
2906442
https://www.phoenixcontact.com/us/products/2906442
Plug-in fuse (TE5®); nominal current: 3.15 A; tripping behavior: fast-blow (F)
Phoenix Contact 2024 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Jan 8, 2024, 9:18 AM
Page 15 (15)
