2910519

https://www.phoenixcontact.com/gb/products/2910519 Relay Module - PLC-RPT- 24DC/21-21/MS - 2910519 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED and freewheeling diode, Push-in connection, 2 PDT, Input voltage: 24 V DC Key Commercial Data Packing unit 10 STK GTIN GTIN 4055626486710 Weight per Piece (excluding packing) 64.000 g Custom tariff number 85364190 Country of origin Germany Note Made to Order (non-returnable) Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 14 mm Height 80 mm Depth 104 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -20 °C ... 85 °C Coil side Nominal input voltage UN 24 V DC Typical input current at UN 18 mA 08/13/2018   Page 1 / 11 https://www.phoenixcontact.com/gb/products/2910519 Relay Module - PLC-RPT- 24DC/21-21/MS - 2910519 Technical data Coil side Typical response time 10 ms Typical release time 10 ms Coil voltage 24 V DC Protective circuit Free-wheeling diode Damping diode Operating voltage display Yellow LED Contact side Contact type 2 PDT Type of switch contact Single contact Contact material AgNi Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8PLC... or ...FBST 500...) Minimum switching voltage 12 V (10 mA) Min. switching current 10 mA (12 V) Maximum inrush current 12 A (20 ms) Limiting continuous current 6A Interrupting rating (ohmic load) max. 192 W (24 V DC) 62 W (48 V DC) 42 W (60 V DC) 55 W (110 V DC) 66 W (220 V DC) 2000 VA (250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 1 A (24 V, DC13) 1.5 A (230 V, AC15) Connection data input side Connection name Coil side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² 0.2 mm² ... 2.5 mm² () 2x 0.5 mm² ... 1 mm² () Conductor cross section AWG 26 ... 14 Connection data output side Connection name Contact side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² 08/13/2018   Page 2 / 11 https://www.phoenixcontact.com/gb/products/2910519 Relay Module - PLC-RPT- 24DC/21-21/MS - 2910519 Technical data Connection data output side 0.2 mm² ... 2.5 mm² () 2x 0.5 mm² ... 1 mm² () Conductor cross section AWG 26 ... 14 General Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Test voltage PDT/PDT 2.5 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection RT II (Relay) IP20 (Relay base) Mechanical service life 5x 10 cycles UL, USA UL 508 6 UL 508 Recognized UL, USA/Canada cUL 508 cUL 508 Recognized Mounting position any Assembly instructions In rows with zero spacing Standards and Regulations Designation Standards/regulations Standards/regulations EN 50178 Rated insulation voltage 250 V AC Rated surge voltage 6 kV Insulation Safe isolation of input/output Degree of pollution 2 Overvoltage category III Flammability rating according to UL 94 V0 UL, USA UL 508 UL 508 Recognized UL, USA/Canada cUL 508 cUL 508 Recognized Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 08/13/2018   Page 3 / 11 https://www.phoenixcontact.com/gb/products/2910519 Relay Module - PLC-RPT- 24DC/21-21/MS - 2910519 Diagram Diagram Cycles 107 U U N 1,4 10 A 6 1,3 1,2 105 1,1 UN= 24 V DC 1 104 0,9 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Switching current [A] 250 V AC, ohmic load B 0,8 0,7 20 Electrical service life 25 30 35 40 45 50 55 60 65 TU [ ° C] Curve A Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data) Curve B Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data) Diagram Diagram 10 6 4 1 1 2 4 1 3 0,9 Reduction factor Switching current [A] 20 2 0,5 0,3 0,2 0,1 10 20 30 50 70 100 200 Switching voltage [V] 1 AC, ohmic load 2 DC, ohmic load, contacts in series 3 DC, ohmic load 4 DC, L/R = 40 ms Interrupting rating 300 0,8 0,7 0,6 0,5 0,4 0,3 1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 COS j Service life reduction factor Articles in set Relay base - PLC-BPT- 24DC/21-21/H - 1012141 14 mm PLC basic terminal block without relay, for mounting on DIN rail NS 35/7,5, Push-in connection, 2 PDT, Input voltage 24 V DC     08/13/2018   Page 4 / 11 https://www.phoenixcontact.com/gb/products/2910519 Relay Module - PLC-RPT- 24DC/21-21/MS - 2910519 Articles in set Single relay - REL-MR- 24DC/21-21/MS - 2987943 Plug-in miniature relay, with power contact, 2 PDTs, test button, mechanical switch position indicator, status LED, freewheeling diode, polarity A1+, A2, input voltage 24 V DC     Classifications eCl@ss eCl@ss 5.0 27371601 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 ETIM 4.0 EC001437 ETIM 5.0 EC001437 ETIM 6.0 EC001437 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39122334 Approvals Approvals Approvals UL Recognized / UL Listed / cUL Recognized / cUL Listed / EAC / cULus Recognized Ex Approvals Approval details 08/13/2018   Page 5 / 11 https://www.phoenixcontact.com/gb/products/2910519 Relay Module - PLC-RPT- 24DC/21-21/MS - 2910519 Approvals UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 172140 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 172140 EAC      RU CDE.A*30.B.01082 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories Bridge Continuous plug-in bridge - FBST 500-PLC RD - 2966786 Continuous plug-in bridge, length: 500 mm, color: red     Continuous plug-in bridge - FBST 500-PLC BU - 2966692 Continuous plug-in bridge, length: 500 mm, color: blue     08/13/2018   Page 6 / 11 https://www.phoenixcontact.com/gb/products/2910519 Relay Module - PLC-RPT- 24DC/21-21/MS - 2910519 Accessories Continuous plug-in bridge - FBST 500-PLC GY - 2966838 Continuous plug-in bridge, length: 500 mm, color: gray     Single plug-in bridge - FBST 6-PLC RD - 2966236 Single plug-in bridge, length: 6 mm, number of positions: 2, color: red     Single plug-in bridge - FBST 6-PLC BU - 2966812 Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue     Single plug-in bridge - FBST 6-PLC GY - 2966825 Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray     Single plug-in bridge - FBST 6-PLC RD - 2966236 Single plug-in bridge, length: 6 mm, number of positions: 2, color: red     08/13/2018   Page 7 / 11 https://www.phoenixcontact.com/gb/products/2910519 Relay Module - PLC-RPT- 24DC/21-21/MS - 2910519 Accessories Single plug-in bridge - FBST 6-PLC RD - 2966236 Single plug-in bridge, length: 6 mm, number of positions: 2, color: red     Controller board System connection - PLC-V8L/FLK14/OUT - 2299660 V8 adapter for 8 x PLC-INTERFACE (14 mm); Controller: PLC system cabling of output cards; connection 1: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals); connection 2: 1x IDC/FLK pin strip (14-position); number of channels: 8; control logic: positive switching     System connection - PLC-V8L/FLK14/OUT/M - 2304306 V8 adapter for 8 x PLC-INTERFACE (14 mm); Controller: PLC system cabling of output cards; connection 1: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals); connection 2: 1x IDC/FLK pin strip (14-position); number of channels: 8; control logic: negative switching     DIN rail DIN rail, unperforated - NS 35/ 7,5 V2A UNPERF 2000MM - 0801377 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Stainless steel V2A, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     08/13/2018   Page 8 / 11 https://www.phoenixcontact.com/gb/products/2910519 Relay Module - PLC-RPT- 24DC/21-21/MS - 2910519 Accessories DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     08/13/2018   Page 9 / 11 https://www.phoenixcontact.com/gb/products/2910519 Relay Module - PLC-RPT- 24DC/21-21/MS - 2910519 Accessories DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     Labeled terminal marker Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 991 - 1000, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm     Partition plate Separating plate - PLC-ATP BK - 2966841 Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation     Power module Power terminal block - PLC-ESK GY - 2966508 Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5     Screwdriver tools 08/13/2018   Page 10 / 11 https://www.phoenixcontact.com/gb/products/2910519 Relay Module - PLC-RPT- 24DC/21-21/MS - 2910519 Accessories Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Terminal marking Zack marker strip - ZB10/WH-100:UNBEDRUCKT - 5060883 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm     Zack marker strip - ZB 10:UNBEDRUCKT - 1053001 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm     Spare parts Relay base - PLC-BPT- 24DC/21-21/H - 1012141 14 mm PLC basic terminal block without relay, for mounting on DIN rail NS 35/7,5, Push-in connection, 2 PDT, Input voltage 24 V DC     Single relay - REL-MR- 24DC/21-21/MS - 2987943 Plug-in miniature relay, with power contact, 2 PDTs, test button, mechanical switch position indicator, status LED, freewheeling diode, polarity A1+, A2, input voltage 24 V DC     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 08/13/2018   Page 11 / 11