2910539

https://www.phoenixcontact.com/ae/products/2910539 Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PLC-INTERFACE, consisting of a relay base and pluggable safety relay with force-guided contacts in accordance with DIN EN 50205, Push-in connection, 2 changeover contacts, forcibly actuated, Input voltage: 24 V AC/DC Product Description The force-guided coupling relay module is approved for industrial control equipment in accordance with UL 508 (cULus listed). The requirements for Type A in accordance with DIN EN 50205 are satisfied if the circuit is designed as 1 N/O contact / 1 N/C contact. Key Commercial Data Packing unit 10 STK GTIN GTIN 4055626486062 Weight per Piece (excluding packing) 64.000 g Custom tariff number 85364190 Note Made to Order (non-returnable) Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 14 mm Height 80 mm Depth 104 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -20 °C ... 85 °C Coil side Nominal input voltage UN 24 V AC/DC 04/18/2018   Page 1 / 9 https://www.phoenixcontact.com/ae/products/2910539 Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539 Technical data Coil side Input voltage range in reference to UN see diagram Typical input current at UN 30 mA Typical response time 3 ms ... 15 ms Typical release time range 3 ms ... 15 ms Coil voltage 24 V DC Protective circuit Bridge rectifier Operating voltage display Yellow LED Contact side Contact type 2 changeover contacts, forcibly actuated Type of switch contact Single contact Contact material AgNi Force-guided contacts in accordance with EN 50205 Type B Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V (10 mA) Min. switching current 10 mA (5 V) Maximum inrush current 6A Limiting continuous current 6A Interrupting rating (ohmic load) max. 144 W (24 V DC) 288 W (48 V DC) 88 W (110 V DC) 110 W (220 V DC) 1500 VA (250 V AC) Switching capacity min. 150 mW Switching capacity in acc. with DIN VDE 0660/IEC 60947 3 A (24 V, DC13) 3 A (230 V, AC15) Connection data input side Connection name Coil side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 14 Connection data output side Connection name Contact side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 14 04/18/2018   Page 2 / 9 https://www.phoenixcontact.com/ae/products/2910539 Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539 Technical data General Test voltage relay winding/relay contact 4 kVrms (50 Hz, 1 min.) Test voltage PDT/PDT 2.5 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection IP20 (Relay base) RT II (Relay) Mechanical service life Approx. 10 cycles UL, USA UL 508 7 UL 508 Recognized UL, USA/Canada cUL 508 cUL 508 Recognized Mounting position any Assembly instructions In rows with zero spacing B10d 180000 Cycles (AC15; 250 V / 3 A; 1 NO) 180000 Cycles (DC13; 3 A) Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Articles in set Safety relays - REL-SR- 24DC/2X21/FG - 2908777 Safety relay with forcibly guided contacts in acc. with DIN EN 50205, contact type 2 PDTs. The requirements for type A in accordance with EN 50205 are fulfilled when the wiring topology is 1 NO / 1 NC.     Classifications eCl@ss eCl@ss 5.0 27371601 eCl@ss 5.1 27371601 eCl@ss 6.0 27371601 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 04/18/2018   Page 3 / 9 https://www.phoenixcontact.com/ae/products/2910539 Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539 Classifications ETIM ETIM 3.0 EC001437 ETIM 4.0 EC001437 ETIM 5.0 EC001437 ETIM 6.0 EC001437 UNSPSC UNSPSC 13.2 39122334 Approvals Approvals Approvals UL Listed / cUL Listed / EAC / cULus Listed Ex Approvals Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 172140 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 172140 EAC      RU CDE.A*30.B.01082 cULus Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories Bridge 04/18/2018   Page 4 / 9 https://www.phoenixcontact.com/ae/products/2910539 Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539 Accessories Continuous plug-in bridge - FBST 500-PLC RD - 2966786 Continuous plug-in bridge, length: 500 mm, color: red     Continuous plug-in bridge - FBST 500-PLC BU - 2966692 Continuous plug-in bridge, length: 500 mm, color: blue     Continuous plug-in bridge - FBST 500-PLC GY - 2966838 Continuous plug-in bridge, length: 500 mm, color: gray     Single plug-in bridge - FBST 6-PLC RD - 2966236 Single plug-in bridge, length: 6 mm, number of positions: 2, color: red     Single plug-in bridge - FBST 6-PLC BU - 2966812 Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue     04/18/2018   Page 5 / 9 https://www.phoenixcontact.com/ae/products/2910539 Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539 Accessories Single plug-in bridge - FBST 6-PLC GY - 2966825 Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray     Single plug-in bridge - FBST 8-PLC GY - 2967688 Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray     Single plug-in bridge - FBST 14-PLC BK - 2967691 Single plug-in bridge, length: 14 mm, number of positions: 2, color: black     DIN rail DIN rail, unperforated - NS 35/ 7,5 V2A UNPERF 2000MM - 0801377 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Stainless steel V2A, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     04/18/2018   Page 6 / 9 https://www.phoenixcontact.com/ae/products/2910539 Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539 Accessories DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     04/18/2018   Page 7 / 9 https://www.phoenixcontact.com/ae/products/2910539 Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539 Accessories DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     Labeled terminal marker Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 991 - 1000, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm     Partition plate Separating plate - PLC-ATP BK - 2966841 Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation     Power module Power terminal block - PLC-ESK GY - 2966508 Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     04/18/2018   Page 8 / 9 https://www.phoenixcontact.com/ae/products/2910539 Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539 Accessories Terminal marking Zack marker strip - ZB10/WH-100:UNBEDRUCKT - 5060883 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm     Zack marker strip - ZB 10:UNBEDRUCKT - 1053001 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm     Spare parts Safety relays - REL-SR- 24DC/2X21/FG - 2908777 Safety relay with forcibly guided contacts in acc. with DIN EN 50205, contact type 2 PDTs. The requirements for type A in accordance with EN 50205 are fulfilled when the wiring topology is 1 NO / 1 NC.     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 04/18/2018   Page 9 / 9