2912552

https://www.phoenixcontact.com/us/products/2912552 Relay Module - PLC-RSP-230UC/21-21 - 2912552 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PLC relay, consisting of base terminal block PLC-BSP.../21 with spring-cage connection and pluggable miniature relay with power contact, for assembly on DIN rail NS 35/7.5, 1 PDT, input voltage 230 V AC / 220 V DC Product Features ■ ■ ■ ■ ■ ■ Slim design Efficient connection to system cabling using V8 adapter Safe isolation according to DIN EN 50178 between coil and contact RT III sealed relay Functional plug-in bridges Integrated input circuit and interference suppression circuit Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 65.21 g Custom tariff number 85364900 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 14 mm Height 80 mm Depth 94 mm Ambient conditions 03/14/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/2912552 Relay Module - PLC-RSP-230UC/21-21 - 2912552 Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 55 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 230 V AC 220 V DC Typical input current at UN 4.3 mA (at 220 V DC) 4.5 mA (for 230 V AC) Typical response time 7 ms Typical release time 10 ms Protective circuit Bridge rectifier Bridge rectifier Operating voltage display Yellow LED Power dissipation for nominal condition 0.99 W Contact side Contact type 2 PDT Contact material AgNi Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) Minimum switching voltage 5 V AC/DC (at 10 mA) Min. switching current 10 mA (At 5 V) Maximum inrush current 15 A (300 ms) Limiting continuous current 6A Interrupting rating (ohmic load) max. 140 W (at 24 V DC) 85 W (at 48 V DC) 60 W (at 60 V DC) 44 W (at 110 V DC) 60 W (at 220 V DC) 1500 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.2 A (at 250 V, DC13) 3 A (at 24 V, AC15) 3 A (at 120 V, AC15) 3 A (at 250 V, AC15) Connection data input side Connection name Coil side Connection method Spring-cage connection 03/14/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/2912552 Relay Module - PLC-RSP-230UC/21-21 - 2912552 Technical data Connection data input side Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 14 Connection data output side Connection name Contact side Connection method Spring-cage connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 14 General Operating mode 100% operating factor Degree of protection RT III (Relay) Mechanical service life 3 x 10 cycles Flammability rating according to UL 94 V0 Designation Standards/regulations Standards/regulations IEC 60664 7 EN 50178 IEC 62103 Rated surge voltage/insulation 6 kV (safe isolation: control side / contact side) Degree of pollution 2 Overvoltage category III Mounting position any Assembly instructions In rows with zero spacing Standards and Regulations Connection in acc. with standard CUL Designation Standards/regulations Standards/regulations IEC 60664 EN 50178 IEC 62103 Rated surge voltage/insulation 6 kV (safe isolation: control side / contact side) Degree of pollution 2 Overvoltage category III Flammability rating according to UL 94 V0 03/14/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/2912552 Relay Module - PLC-RSP-230UC/21-21 - 2912552 Articles in set Relay socket - PLC-BSP-230UC/21-21 - 2912484 14 mm PLC basic terminal block with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 230 V AC/DC     Single relay - REL-MR-110DC/21-21 - 2961202 Plug-in miniature power relay, with power contact, 2 PDTs, input voltage 110 V DC     Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371001 eCl@ss 7.0 27371001 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC000196 ETIM 3.0 EC000196 ETIM 4.0 EC000196 ETIM 5.0 EC001437 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39121515 03/14/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/2912552 Relay Module - PLC-RSP-230UC/21-21 - 2912552 Approvals Approvals Approvals UL Listed / cUL Listed / GL / UL Recognized / cUL Recognized / EAC / RC FRT / EAC / cULus Recognized / cULus Listed Ex Approvals Approvals submitted Approval details UL Listed  cUL Listed  GL  UL Recognized  cUL Recognized  EAC  RC FRT  EAC  03/14/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/2912552 Relay Module - PLC-RSP-230UC/21-21 - 2912552 Approvals cULus Recognized  cULus Listed  Drawings Diagram Circuit diagram Switching current [A] 20 21 10 6 4 24 1 2 4 1 3 2 0,5 0,3 0,2 A2 11 A1 14 22 12 0,1 10 20 30 50 70 100 200 Switching voltage [V] 300 1 AC, ohmic load 2 DC, ohmic load, contacts in series 3 DC, ohmic load 4 DC, L/R = 40 ms Interrupting rating 03/14/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/2912552 Relay Module - PLC-RSP-230UC/21-21 - 2912552 Diagram Curve A Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data) Curve B Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data) Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/14/2016   Page 7 / 7