https://www.phoenixcontact.com/us/produkte/2920010
Surge protection base element - PT 1X2-BE/FM - 2920010
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Base element to accept a protective plug with diagnostic and status indicator for one floating double
wire
Why buy this product
Plugs can be checked with CHECKMASTER
Maximum ease of maintenance thanks to the two-piece design
Base element remains an integral part of the installation
Consistent plug-in signal circuit protection
Permanent and independent monitoring by a diagnostics unit
With floating remote indication contact
Impedance-neutral disconnection of plug for test and maintenance purposes
Optical status indication for the individual arresters
Key commercial data
Packing unit
0
Minimum order quantity
1
Catalog page
Page 90 (TT-2011)
GTIN
Custom tariff number
85369010
Country of origin
GERMANY
Technical data
General
Inflammability class according to UL 94
V0
Color
black
Ambient temperature (operation)
40 °C ... 85 °C
Mounting type
DIN rail: 35 mm
Design
DIN rail module, two-section, divisible
Degree of protection
IP20
Direction of action
Shield-Earth Ground
Width
17.7 mm
05.10.2012 Page 1 / 5
https://www.phoenixcontact.com/us/produkte/2920010
Surge protection base element - PT 1X2-BE/FM - 2920010
Technical data
General
Height
89.8 mm
Depth
52 mm
Pitch unit
1 Div.
Protective circuit
Message: Surge protection fault
None
Connection data
Connection method
Screw connection
Connection type IN
Screw terminal blocks
Connection type OUT
Screw terminal blocks
Screw thread
M3
Tightening torque
0.8 Nm
Stripping length
8 mm
Conductor cross section stranded min.
0.2 mm²
Conductor cross section stranded max.
2.5 mm²
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG/kcmil min.
24
Conductor cross section AWG/kcmil max
12
Classifications
eclass
eCl@ss 4.0
27140201
eCl@ss 4.1
27130801
eCl@ss 5.0
27130801
eCl@ss 5.1
27130801
eCl@ss 6.0
27130803
eCl@ss 7.0
27130803
etim
ETIM 2.0
EC000472
ETIM 3.0
EC000472
ETIM 4.0
EC000472
ETIM 5.0
EC000472
unspsc
UNSPSC 6.01
30212010
UNSPSC 7.0901
39121610
UNSPSC 11
39121610
UNSPSC 12.01
39121610
UNSPSC 13.2
39121620
05.10.2012 Page 2 / 5
https://www.phoenixcontact.com/us/produkte/2920010
Surge protection base element - PT 1X2-BE/FM - 2920010
Approvals
Approvals
Approvals
UL Listed / GOST / GL
Ex Approvals
Approvals submitted
Approval details
UL Listed
GOST
GL
Accessories
Accessories
Marking
Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017
Zack marker strip, Strip, white, Labeled, Can be labeled with: Plotter, Printed horizontally: Consecutive
numbers 1 - 10, 11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, For terminal
block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker
groove, For terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm
05.10.2012 Page 3 / 5
https://www.phoenixcontact.com/us/produkte/2920010
Surge protection base element - PT 1X2-BE/FM - 2920010
Accessories
Zack marker strip - ZB 5,LGS:L1-N,PE - 1050415
Zack marker strip, Strip, white, Labeled, Can be labeled with: Plotter, Horizontal: L1, L2, L3, N, PE, L1, L2,
L3, N, PE, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field:
5.15 x 10.5 mm
Zack marker strip - ZB 5,8:UNBEDRUCKT - 2715209
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker
groove, For terminal block width: 5.8 mm, Lettering field: 5.75 x 10.5 mm
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line
thickness 0.35 mm
Marker pen - B-STIFT - 1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642
Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat
marker groove, For terminal block width: 5 mm, Lettering field: 5.1 x 5.2 mm
Additional products
05.10.2012 Page 4 / 5
https://www.phoenixcontact.com/us/produkte/2920010
Surge protection base element - PT 1X2-BE/FM - 2920010
Accessories
Shield connection - SSA 3-6 - 2839295
shield fast connections for conductor diameter 3 - 6 mm. Potential connection cable: 200 mm, black
Shield connection - SSA 5-10 - 2839512
Shield fast connection for conductor diameters 5 - 10 mm. Potential connection cable: 200 mm, black
Drawings
Dimensioned drawing
90
51,5
65,5
44,8
The figure shows the complete module consisting of a base element
and connector
© Phoenix Contact 2012 - all rights reserved
http://www.phoenixcontact.com
05.10.2012 Page 5 / 5