2924210

https://www.phoenixcontact.com/us/products/2924210 Repeater power supply - MACX MCR-SL-RPSSI-I-UP-SP - 2924210 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Repeater power supply for supplying 2 and 3-conductor transmitters with HART transmission and wide range power supply, SIL, spring-cage connection Product Features  250 Ω resistor that can be activated via DIP switches to increase HART impedance for low-resistance systems  Up to SIL 2 according to EN 61508  Installation in zone 2, protection type "n" (EN 60079-15) permitted  Bidirectional transmission of digital HART communication signals  Plug-in screw or spring-cage connection technology (Push-in technology), with integrated sockets for HART communicators  Wide-range power supply of 19.2 ... 253 V AC/DC  3-way electrical isolation  0/4 ... 20 mA output (active or passive), 0/1 ... 5 V, can be selected via DIP switches  0/4 ... 20 mA input (powered or not powered)           Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 140.0 GRM Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions 10/27/2014   Page 1 / 5 https://www.phoenixcontact.com/us/products/2924210 Repeater power supply - MACX MCR-SL-RPSSI-I-UP-SP - 2924210 Technical data Dimensions Width 17.5 mm Height 99 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C (Any mounting position) Ambient temperature (storage/transport) -40 °C ... 80 °C Maximum altitude ≤ 2000 m Permissible humidity (operation) 10 % ... 95 % (non-condensing) Degree of protection IP20 Input data Current input signal 0 mA ... 20 mA 4 mA ... 20 mA Transmitter supply voltage > 16 V (at 20 mA) Voltage drop < 3.5 V (in input isolating amplifier operation) Output data Signal output Current output Voltage output signal 0 V ... 5 V (internal resistance, 250 Ω, 0.1%) Current output signal 0 mA ... 20 mA (active) 4 mA ... 20 mA (active) 0 mA ... 20 mA (14 ... 26 V ext. source voltage) 4 mA ... 20 mA (14 ... 26 V ext. source voltage) Transmission Behavior 1:1 to input signal Load/output load current output < 600 Ω (I output) Output ripple < 20 mVrms Power supply Supply voltage range 24 V ... 230 V AC/DC (-20%/+10%, 50/60 Hz) Max. current consumption < 75 mA (at 24 V DC) Power consumption < 1.8 W Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 1.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 16 10/27/2014   Page 2 / 5 https://www.phoenixcontact.com/us/products/2924210 Repeater power supply - MACX MCR-SL-RPSSI-I-UP-SP - 2924210 Technical data Connection data Stripping length 8 mm Connection method Spring-cage connection General No. of channels 1 Maximum transmission error < 0.1 % (of final value) Transmission error, typical < 0.05 % (of final value) Maximum temperature coefficient < 0.01 %/K Step response (10-90%) < 600 µs (for 4 mA ... 20 mA step) Status display Green LED (supply voltage) Inflammability class according to UL 94 V0 Pollution degree 2 Surge voltage category II Housing material PA 66-FR Color green Designation Input/output/power supply Electrical isolation 300 Vrms (Rated insulation voltage (surge voltage category II; pollution degree 2, safe isolation as per EN 61010-1)) 2.5 kV (50 Hz, 1 min., test voltage) Conformance CE-compliant, additionally EN 61326 ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA / Canada UL applied for Functional Safety (SIL) SIL 2 according to EN 61508 Data communication (bypass) HART function Yes Protocols supported HART Classifications eCl@ss eCl@ss 4.0 27210120 eCl@ss 4.1 27210120 eCl@ss 5.0 27210120 eCl@ss 5.1 27210120 eCl@ss 6.0 27210120 eCl@ss 7.0 27210120 eCl@ss 8.0 27210120 10/27/2014   Page 3 / 5 https://www.phoenixcontact.com/us/products/2924210 Repeater power supply - MACX MCR-SL-RPSSI-I-UP-SP - 2924210 Classifications ETIM ETIM 2.0 EC001485 ETIM 3.0 EC001485 ETIM 4.0 EC001485 ETIM 5.0 EC002653 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 Approvals Approvals Approvals Functional Safety Ex Approvals ATEX Approvals submitted Approval details Functional Safety  Drawings 10/27/2014   Page 4 / 5 https://www.phoenixcontact.com/us/products/2924210 Repeater power supply - MACX MCR-SL-RPSSI-I-UP-SP - 2924210 Block diagram OUT IN Sensor / Field Dimensioned drawing 116 (SP) 112,5 PLC / DCS 17,5 99 active 4.3 - S2 4.2 250 Ω + 3.2 3.2 + S1 - 4.1 3.1 3.1 + 250 Ω 4.1 or US passive - 3.2 4.3 114,5 2-wire 4.2 3.3 3.3 4-wire + 4.2 – 1.2 1.2 ~ Power – ~ 24V ...230V AC/DC – 1.1 1.1 ~ Zone 2 Div. 2 Connection example Block diagram Diagram IN Approximately +0.5 mA OUT 4.3 - 3.3 Sink S2 4.2 4.1 – + Source 4.2 4.1 250 W S1 4.2 – + Analog signal 0 + 250 W 3.1 4.3 + 3.2 Approximately –0.5 mA 1.2 1.1 ≃ 24 ... 230 V AC/DC 1200 Hz "1" 2200 Hz "0" Signal transmission analog and digital at the same time Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/27/2014   Page 5 / 5