2940113

https://www.phoenixcontact.com/us/products/2940113 Reversing load relay - CM 90-ELR-W3/5-R - 2940113 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Electronic reversing load relay, for direct driving of 3-phase equipment in the 3-phase network, with light indicator and protection circuit, output: 400 V AC/ 3 x 5 A Key commercial data Packing unit 1 PCE Weight per Piece (excluding packing) 662.9 GRM Custom tariff number 85364900 Country of origin Germany Technical data Dimensions Width 90 mm Height 75 mm Depth 116 mm Ambient conditions Ambient temperature (operation) -20 °C ... 55 °C Ambient temperature (storage/transport) -20 °C ... 70 °C Degree of protection IP20 Input data Input name Device supply Nominal supply voltage 24 V DC Switch-over frequency 2.5 Hz (RL / LL) Protective circuit Protection against polarity reversal Polarity protection diode Surge protection Input name Control input right/left Output data Output name AC output Nominal output voltage 400 V AC +10 % -20 % 12/6/13   Page 1 / 5 https://www.phoenixcontact.com/us/products/2940113 Reversing load relay - CM 90-ELR-W3/5-R - 2940113 Technical data Output data Nominal output voltage range 320 V AC ... 440 V AC Periodic peak reverse voltage 1000 V Mains frequency 50 Hz 60 Hz Continuous load current 3x 5 A (see derating curve) Load current min. 150 mA Leakage current 7 mA Residual voltage 1.7 V Surge current 230 A (t = 10 ms) Protective circuit/component RCV circuit Surge voltage protection 750 V Output name Reply output: Alarm Contact Nominal output voltage 24 V DC +25% -20% Continuous load current 100 mA Protective circuit/component Decoupling diode Type of protection Free running Protective circuit/component Damping diode Status display LED Output name Reply output: "right / left" Number of outputs 2 Nominal output voltage 24 V DC +25% -20% Continuous load current 100 mA Protective circuit/component Decoupling diode Type of protection Free running Protective circuit/component Damping diode Status display LED Connection data Connection method Screw connection Stripping length 8 mm Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 14 Screw thread M3 12/6/13   Page 2 / 5 https://www.phoenixcontact.com/us/products/2940113 Reversing load relay - CM 90-ELR-W3/5-R - 2940113 Technical data General Test voltage input/output 3.5 kV AC Mounting position Vertical (horizontal DIN rail) Assembly instructions Can be aligned with spacing = 20 mm Operating mode 100% operating factor Standards/regulations IEC 60664 IEC 60664 A DIN VDE 0110 DIN VDE 0106-101 DIN VDE 0160 (in relevant parts) IEC 801-5 Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371601 eCl@ss 5.1 27371601 eCl@ss 6.0 27371601 eCl@ss 7.0 27371601 ETIM ETIM 2.0 EC000066 ETIM 3.0 EC000066 ETIM 4.0 EC000066 ETIM 5.0 EC002055 UNSPSC UNSPSC 6.01 30211915 UNSPSC 7.0901 39121514 UNSPSC 11 39121514 UNSPSC 12.01 39121514 UNSPSC 13.2 39121514 Drawings 12/6/13   Page 3 / 5 https://www.phoenixcontact.com/us/products/2940113 Reversing load relay - CM 90-ELR-W3/5-R - 2940113 Diagram Circuit diagram 12/6/13   Page 4 / 5 https://www.phoenixcontact.com/us/products/2940113 © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 12/6/13   Page 5 / 5