2942823

https://www.phoenixcontact.com/us/products/2942823 Solid-state relay module - EMG 17-OV-230AC/ 48DC/2 - 2942823 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Solid-state relay interface designed to prevent interference on the control side, input: 230 V AC, output: 48 V DC/2 A The illustration shows version EMG 17-OV- 24DC/ 48DC/2 Product Features  Use of AC output cards, resulting in residual AC currents  Resistant to interference currents  Applications with long control lines  High relay release voltage     Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 95.89 GRM Custom tariff number 85364900 Country of origin Germany Technical data Dimensions Width 17.5 mm Height 75 mm Depth 102 mm Ambient conditions Ambient temperature (operation) -10 °C ... 55 °C Ambient temperature (storage/transport) -10 °C ... 70 °C Degree of protection IP20 10/31/2014   Page 1 / 4 https://www.phoenixcontact.com/us/products/2942823 Solid-state relay module - EMG 17-OV-230AC/ 48DC/2 - 2942823 Technical data Input data Nominal input voltage UN 230 V AC Input voltage range in reference to UN 0.8 ... 1.1 Switching threshold "0" signal, voltage ≤ 155 V AC Switching threshold "1" signal voltage ≥ 180 V AC Typical input current at UN 9 mA Typical response time 25 ms (at UN = 24 V AC) Typical turn-off time 35 ms (at UN = 24 V AC) Status display Yellow LED Type of protection Protection against polarity reversal Protective circuit/component Polarity protection diode Transmission frequency 3 Hz Output data Output nominal voltage 48 V DC Output voltage range 12 V DC ... 48 V DC Limiting continuous current 2 A (see derating curve) Maximum inrush current 5 A (t = 1 s) Peak offstate voltage 60 V DC (Collector-emitter reverse voltage) Voltage drop at max. limiting continuous current 1.1 V Output circuit 3-conductor, ground-referenced Type of protection Protection against polarity reversal Surge protection Protective circuit/component Polarity protection diode Suppressor diode Connection data Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 General Test voltage input/output 3.5 kV AC 3.5 kV AC 10/31/2014   Page 2 / 4 https://www.phoenixcontact.com/us/products/2942823 Solid-state relay module - EMG 17-OV-230AC/ 48DC/2 - 2942823 Technical data General Assembly instructions Mounted in rows with zero spacing: Horizontal/not in rows: Any Operating mode 100% operating factor Inflammability class according to UL 94 V0 Standards/regulations IEC 60664 EN 50178 IEC 62103 Rated surge voltage / insulation Basic insulation Pollution degree 2 Surge voltage category III Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371001 eCl@ss 7.0 27371001 eCl@ss 8.0 27371001 ETIM ETIM 2.0 EC001504 ETIM 3.0 EC001504 ETIM 4.0 EC001504 ETIM 5.0 EC001504 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121542 UNSPSC 11 39121542 UNSPSC 12.01 39121542 UNSPSC 13.2 39121542 Drawings 10/31/2014   Page 3 / 4 https://www.phoenixcontact.com/us/products/2942823 Solid-state relay module - EMG 17-OV-230AC/ 48DC/2 - 2942823 Load current [A] Diagram 3 2 2 1 1 0 20 30 40 50 60 Ambient temperature [°C] 1 In rows with zero spacing 2 stand-alone device Circuit diagram Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/31/2014   Page 4 / 4