2961134

https://www.phoenixcontact.com/us/products/2961134 Single relay - REL-MR- 60DC/21AU - 2961134 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug-in miniature power relay, with multi-layer gold contact, 1 PDT, input voltage 60 V DC The illustration shows the version REL-MR- 24DC/21 Product Features ■ ■ ■ Safe isolation according to DIN EN 50178 between coil and contact High degree of protection up to RT III depending on type (wash-proof) Power contacts up to 6 A Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN Weight per Piece (excluding packing) 9.56 g Custom tariff number 85364190 Country of origin Czech Republic Technical data Dimensions Width 5 mm Height 28 mm Depth 15 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Ambient temperature (storage/transport) -40 °C ... 85 °C 04/27/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2961134 Single relay - REL-MR- 60DC/21AU - 2961134 Technical data Coil side Nominal input voltage UN 60 V DC Typical input current at UN 3 mA Typical response time 5 ms Typical release time 2.5 ms Coil resistance 20500 Ω ±15 % (at 20 °C) Power dissipation for nominal condition 0.18 W Contact side Contact type 1 PDT Contact material AgSnO, hard gold-plated Maximum switching voltage 30 V AC 36 V DC Minimum switching voltage 100 mV (at 10 mA) Min. switching current 1 mA (at 24 V) Maximum inrush current 50 mA Limiting continuous current 50 mA Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC) Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 250 V AC Minimum switching voltage 5 V (at 100 mA) Limiting continuous current 6A Min. switching current 10 mA (at 12 V) Interrupting rating (ohmic load) max. 140 W (at 24 V DC) 20 W (at 48 V DC) 18 W (at 60 V DC) 23 W (at 110 V DC) 40 W (at 220 V DC) 1500 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.1 A (at 220 V, DC13) 3 A (at 24 V, AC15) 3 A (at 120 V, AC15) 3 A (at 230 V, AC15) General Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor 04/27/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2961134 Single relay - REL-MR- 60DC/21AU - 2961134 Technical data General Degree of protection RT III (wash-proof) Mechanical service life 2 x 10 cycles Standards/regulations IEC 60664 7 EN 50178 IEC 62103 Degree of pollution 3 Overvoltage category III Mounting position any Assembly instructions In rows with zero spacing Standards and Regulations Connection in acc. with standard CUL Standards/regulations IEC 60664 EN 50178 IEC 62103 Degree of pollution 3 Overvoltage category III Classifications eCl@ss eCl@ss 4.0 27371104 eCl@ss 4.1 27371104 eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371001 eCl@ss 7.0 27371001 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC000196 ETIM 3.0 EC000196 ETIM 4.0 EC000196 ETIM 5.0 EC001437 UNSPSC UNSPSC 6.01 30211916 04/27/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2961134 Single relay - REL-MR- 60DC/21AU - 2961134 Classifications UNSPSC UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39121515 Approvals Approvals Approvals UL Recognized / VDE Gutachten mit Fertigungsüberwachung / VDE Zeichengenehmigung / cUL Recognized / GL / EAC / EAC / UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  VDE Gutachten mit Fertigungsüberwachung  VDE Zeichengenehmigung  cUL Recognized  GL  04/27/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2961134 Single relay - REL-MR- 60DC/21AU - 2961134 Approvals EAC  EAC  UL Recognized  cUL Recognized  cULus Recognized  Drawings Drilling diagram Diagram 20 1,3 1,9 1,2 Switching current [A] 1 10 6 4 1 2 1 2 0,5 0,3 0,2 0,1 a = pitch division 1.25 mm and 1.27 mm 10 20 30 1 AC, ohmic load 2 DC, ohmic load 50 70 100 200 Switching voltage [V] 300 Interrupting rating Dimensional drawing 5 3,5 15 28 Circuit diagram A2 A1 12 11 14 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/27/2016   Page 5 / 5