2961752

DEK-OV- 5DC/ 24DC/ 10 - Solid-state relay terminal block 2961752 https://www.phoenixcontact.com/us/products/2961752 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Power solid-state relay terminal block, input: DC voltage, output: DC voltage, input voltage: 5 V DC Your advantages • Actuator version available • EB-DIK insertion bridges • Labeling and mounting with user-friendly modular terminal blocks • Wear-free switching of up to 24 V DC/10 A or 240 V AC/800 mA • Integrated output protective circuit • Zero voltage switch at AC output • Electrical isolation between input and output at up to 2.5 kVrms • Status indicator • Integrated input circuit Commercial data Item number 2961752 Packing unit 1 pc Minimum order quantity 1 pc Sales key C460 Product key CK61D2 Catalog page Page 443 (C-5-2019) GTIN 4017918927950 Weight per piece (including packing) 25.38 g Weight per piece (excluding packing) 25 g Customs tariff number 85364190 Country of origin CN Jan 8, 2024, 9:00 AM Page 1 (14) DEK-OV- 5DC/ 24DC/ 10 - Solid-state relay terminal block 2961752 https://www.phoenixcontact.com/us/products/2961752 Technical data Notes General The housing is open on one side. The appropriate cover is DDEK 1,5 GN (2716949). General Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. Product properties Product type Solid-state relay module Product family DEK Application Output function Operating mode 100% operating factor Insulation characteristics Insulation Basic insulation Insulation characteristics: Standards/regulations Insulation Basic insulation Overvoltage category III Pollution degree 2 Electrical properties Test voltage (Input/output) 2.5 kV AC (50 Hz, 1 min., input/output) Input data Nominal input voltage UN 5 V DC Input voltage range in reference to UN 0.8 ... 1.2 Input voltage range 4 V DC ... 6 V DC Switching threshold "0" signal in reference to UN ≤ 0.4 Switching threshold "1" signal in reference to UN ≥ 0.8 Typical input current at UN 5.1 mA Typical response time 250 µs Typical turn-off time 800 µs Operating voltage display Yellow LED Protective circuit Reverse polarity protection Surge protection Transmission frequency 100 Hz Output data Contact switching type 1 N/O contact Jan 8, 2024, 9:00 AM Page 2 (14) DEK-OV- 5DC/ 24DC/ 10 - Solid-state relay terminal block 2961752 https://www.phoenixcontact.com/us/products/2961752 Design of digital output electronic Output voltage range 5 V DC ... 30 V DC Limiting continuous current 10 A (see derating curve) Surge current 100 A (t = 20 ms) Voltage drop at max. limiting continuous current < 50 mV Output circuit 3-conductor, ground-referenced Protective circuit Reverse polarity protection Surge protection Connection data Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section rigid 0.2 mm² ... 2.5 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG 24 ... 14 Tightening torque 0.5 Nm Dimensions Width 6.2 mm Height 80 mm Depth 56 mm Environmental and real-life conditions Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -20 °C ... 70 °C Standards and regulations Standards/regulations Standards/regulations IEC 60947-5-1 Mounting Mounting type DIN rail mounting Assembly instructions in rows with zero spacing Mounting position any Jan 8, 2024, 9:00 AM Page 3 (14) DEK-OV- 5DC/ 24DC/ 10 - Solid-state relay terminal block 2961752 https://www.phoenixcontact.com/us/products/2961752 Drawings Circuit diagram A1 A A2 + 0 Jan 8, 2024, 9:00 AM Page 4 (14) DEK-OV- 5DC/ 24DC/ 10 - Solid-state relay terminal block 2961752 https://www.phoenixcontact.com/us/products/2961752 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/2961752  cUL Recognized  UL Recognized  Approval ID: FILE E 238705 Approval ID: FILE E 238705 EAC Approval ID: TR_TS_D_00573_c cULus Recognized Jan 8, 2024, 9:00 AM Page 5 (14) DEK-OV- 5DC/ 24DC/ 10 - Solid-state relay terminal block 2961752 https://www.phoenixcontact.com/us/products/2961752 Classifications ECLASS ECLASS-11.0 27371604 ECLASS-12.0 27371604 ECLASS-13.0 27371604 ETIM ETIM 9.0 EC001504 UNSPSC UNSPSC 21.0 39122300 Jan 8, 2024, 9:00 AM Page 6 (14) DEK-OV- 5DC/ 24DC/ 10 - Solid-state relay terminal block 2961752 https://www.phoenixcontact.com/us/products/2961752 Environmental product compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Jan 8, 2024, 9:00 AM Page 7 (14) DEK-OV- 5DC/ 24DC/ 10 - Solid-state relay terminal block 2961752 https://www.phoenixcontact.com/us/products/2961752 Accessories Note: Applying some accessories below might limit this product. EB 2- DIK RD - Insertion bridge 2716693 https://www.phoenixcontact.com/us/products/2716693 Insertion bridge, pitch: 6.15 mm, number of positions: 2, color: red Max. current carrying capacity: 26 A EB 3- DIK RD - Insertion bridge 2716745 https://www.phoenixcontact.com/us/products/2716745 Insertion bridge, pitch: 6.15 mm, number of positions: 3, color: red Max. current carrying capacity: 26 A Jan 8, 2024, 9:00 AM Page 8 (14) DEK-OV- 5DC/ 24DC/ 10 - Solid-state relay terminal block 2961752 https://www.phoenixcontact.com/us/products/2961752 EB 4- DIK RD - Insertion bridge 2716758 https://www.phoenixcontact.com/us/products/2716758 Insertion bridge, pitch: 6.15 mm, number of positions: 4, color: red Max. current carrying capacity: 26 A EB 5- DIK RD - Insertion bridge 2716761 https://www.phoenixcontact.com/us/products/2716761 Insertion bridge, pitch: 6.15 mm, number of positions: 5, color: red Max. current carrying capacity: 26 A Jan 8, 2024, 9:00 AM Page 9 (14) DEK-OV- 5DC/ 24DC/ 10 - Solid-state relay terminal block 2961752 https://www.phoenixcontact.com/us/products/2961752 EB 10- DIK RD - Insertion bridge 2716774 https://www.phoenixcontact.com/us/products/2716774 Insertion bridge, pitch: 6.15 mm, number of positions: 10, color: red Max. current carrying capacity: 26 A EB 80- DIK RD - Insertion bridge 2715953 https://www.phoenixcontact.com/us/products/2715953 Insertion bridge, pitch: 6.2 mm, number of positions: 80, color: red Max. current carrying capacity: 26 A Jan 8, 2024, 9:00 AM Page 10 (14) DEK-OV- 5DC/ 24DC/ 10 - Solid-state relay terminal block 2961752 https://www.phoenixcontact.com/us/products/2961752 EB 5- DIK BU - Insertion bridge 2716677 https://www.phoenixcontact.com/us/products/2716677 Insertion bridge, pitch: 6.15 mm, number of positions: 5, color: blue Max. current carrying capacity: 26 A EB 10- DIK BU - Insertion bridge 2716680 https://www.phoenixcontact.com/us/products/2716680 Insertion bridge, pitch: 6.15 mm, number of positions: 10, color: blue Max. current carrying capacity: 26 A Jan 8, 2024, 9:00 AM Page 11 (14) DEK-OV- 5DC/ 24DC/ 10 - Solid-state relay terminal block 2961752 https://www.phoenixcontact.com/us/products/2961752 EB 80- DIK BU - Insertion bridge 2715940 https://www.phoenixcontact.com/us/products/2715940 Insertion bridge, pitch: 6.2 mm, number of positions: 80, color: blue Max. current carrying capacity: 26 A D-DEK 1,5 GN - Separating plate 2716949 https://www.phoenixcontact.com/us/products/2716949 Cover for setting the end of a terminal row, color: green Jan 8, 2024, 9:00 AM Page 12 (14) DEK-OV- 5DC/ 24DC/ 10 - Solid-state relay terminal block 2961752 https://www.phoenixcontact.com/us/products/2961752 ZB 6:UNBEDRUCKT - Zack marker strip 1051003 https://www.phoenixcontact.com/us/products/1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 ZB 6,LGS:FORTL.ZAHLEN - Zack marker strip 1051016 https://www.phoenixcontact.com/us/products/1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snapped, for terminal block width: 6.2 mm, lettering field size: 6. 15 x 10.5 mm, Number of individual labels: 10 Jan 8, 2024, 9:00 AM Page 13 (14) DEK-OV- 5DC/ 24DC/ 10 - Solid-state relay terminal block 2961752 https://www.phoenixcontact.com/us/products/2961752 ZB 6/WH-100:UNBEDRUCKT - Zack marker strip 5060935 https://www.phoenixcontact.com/us/products/5060935 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 1000 DIKD 1,5 - Sensor/actuator terminal block 2715979 https://www.phoenixcontact.com/us/products/2715979 Sensor/actuator terminal block, nom. voltage: 250 V, nominal current: 24 A, connection method: Screw connection, 1st, 2nd and 3rd level, Rated cross section: 2.5 mm2, cross section: 0.2 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 9:00 AM Page 14 (14)