2963938

Safety relays - PSR-SPP- 24UC/ESA4/2X1/1X2 2963938 https://www.phoenixcontact.com/us/products/2963938 Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 2 enabling current paths, nominal input voltage: 24 V DC, plug-in Push-in terminal block Your advantages • Up to Cat. 4/PL e in accordance with EN ISO 13849-1, SIL 3 in accordance with IEC 62061, SIL 3 in accordance with IEC 61508 • 2 channel control • 2 enabling current paths, 1 signaling current path • Manually monitored and automatic activation in a single device Commercial Data Item number 2963938 Packing unit 1 pc Minimum order quantity 1 pc Note Made to Order (non-returnable) Sales Key C18 Product Key DNA113 Catalog Page Page 20 (IF-2009) GTIN 4017918904777 Weight per Piece (including packing) 191.43 g Weight per Piece (excluding packing) 193.9 g Customs tariff number 85371098 Country of origin DE Nov 24, 2022, 3:07 PM Page 1 (10) Safety relays - PSR-SPP- 24UC/ESA4/2X1/1X2 2963938 https://www.phoenixcontact.com/us/products/2963938 Technical Data Product properties Product type Safety relays Application Emergency stop Safety door Mechanical service life approx. 107 cycles Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 Insulation characteristics Overvoltage category III Electrical properties Maximum power dissipation for nominal condition 16.44 W (US = 26.4 V, IL² = 72 A², PTotal max = 2.04 W + 14.4 W) Nominal operating mode 100% operating factor Rated insulation voltage 250 V Rated surge voltage/insulation See section “Insulation coordination” Input data General Rated control circuit supply voltage US 24 V DC -15 % / +10 % Power consumption at US typ. 1.68 W (DC) Rated control supply current IS typ. 70 mA Input voltage range in reference to UN 0.85 ... 1.1 Typical input current at UN 70 mA DC Inrush current < 3.5 A (Δt = 3 ms at Us) < 100 mA (Δt = 500 ms, with Us/Ix at S12) > -100 mA (Δt = 300 ms, with Us/Ix at S22) < 6 mA (with Us/Ix to S34) Current consumption typ. 38 mA (S12) typ. -38 mA (S22) typ. 1 mA (with Us/Ix to S34) Voltage at input/start and feedback circuit approx. 24 V DC Filter time 5 ms (at A1 in the event of voltage dips at Us) No test pulses permitted Typical response time 150 ms (automatic start) Typ. starting time with Us 250 ms (with Us when controlled via A1) Typical release time 20 ms (on demand via the sensor circuit) 45 ms (on demand via A1) Concurrence ∞ Recovery time 1 s (following demand of the safety function) < 1 s (Boot time) Protective circuit Surge protection; Suppressor diode Nov 24, 2022, 3:07 PM Page 2 (10) Safety relays - PSR-SPP- 24UC/ESA4/2X1/1X2 2963938 https://www.phoenixcontact.com/us/products/2963938 Max. permissible overall conductor resistance approx. 50 Ω (Input and start circuits at US) Operating voltage display Green LED Status display Green LED Output data Contact type 2 enabling current paths 1 signaling current path Contact material AgSnO2, + 0.2 µm Au Maximum switching voltage 250 V AC Minimum switching voltage 10 V AC/DC Limiting continuous current 6 A (N/O contact) Maximum inrush current 6A Inrush current, minimum 10 mA Sq. Total current 72 A2 (Enabling current paths) 36 A2 (Signaling current path 31/32) Switching capacity min. 100 mW Switching capacity according to IEC 60947-5-1 6 A (DC13, enabling current paths) 5 A (AC15, enabling current paths) 2 A (DC13, signaling current paths) 1.5 A (AC15, signaling current paths) Output fuse 10 A gL/gG (Enabling current paths) 4 A gL/gG (Low-demand enabling current paths) 6 A gL/gG (Signaling current path) Connection data Connection technology pluggable yes Conductor connection Connection method Push-in connection Conductor cross section solid 0.2 mm² ... 1.5 mm² Conductor cross section flexible 0.2 mm² ... 1.5 mm² Conductor cross-section AWG 24 ... 16 Stripping length 8 mm Dimensions Width 22.5 mm Height 112 mm Depth 114.5 mm Material specifications Housing material Polyamide Housing color yellow Characteristics Nov 24, 2022, 3:07 PM Page 3 (10) Safety relays - PSR-SPP- 24UC/ESA4/2X1/1X2 2963938 https://www.phoenixcontact.com/us/products/2963938 Safety data Stop category 0 Safety data: EN ISO 13849 Category 4 Performance level (PL) e (5 A DC13; 5 A AC15; 8760 switching cycles/year) Safety data: IEC 61508 - High demand Equipment type Type A Safety Integrity Level (SIL) 3 Probability of a hazardous failure per hour (PFHD) 5.5 x 10-10 (5 A DC13; 5 A AC15; 8760 switching cycles/year) Proof test interval 240 Months Duration of use 240 Months Safety data: IEC 61508 - Low demand Equipment type Type A Safety Integrity Level (SIL) 3 Probability of a hazardous failure on demand (PFDAVG) 1.37 x 10-4 Proof test interval 66 Months Environmental and real-life conditions Ambient conditions Degree of protection IP20 Min. degree of protection of inst. location IP54 Ambient temperature (operation) -20 °C ... 55 °C (observe derating) Ambient temperature (storage/transport) -40 °C ... 70 °C Maximum altitude ≤ 2000 m (Above sea level) Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing) Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing) Shock 15g Vibration (operation) 10 Hz ... 150 Hz, 2g Standards and regulations Air clearances and creepage distances between the power circuits Standards/regulations DIN EN 60947-1 Mounting Mounting type DIN rail mounting Assembly instructions See derating curve Mounting position vertical or horizontal Nov 24, 2022, 3:07 PM Page 4 (10) Safety relays - PSR-SPP- 24UC/ESA4/2X1/1X2 2963938 https://www.phoenixcontact.com/us/products/2963938 Drawings Circuit diagram A1 S11 S12 S33 S34 IN 1/2 31 14 24 32 K2 Power 24 VDC A2 23 K1 U Logic Logic 13 S22 S21 Circuit diagram 24 V DC L S1 A1 S11 (+) S12 S21 S22 ( ) (GND) ( ) PSR-ESA4/2x1/1x2 A2 (+) S33 ( ) S34 K3 K4 0V 13 23 31 K3 14 24 32 K4 M K3 K4 N Nov 24, 2022, 3:07 PM Page 5 (10) Safety relays - PSR-SPP- 24UC/ESA4/2X1/1X2 2963938 https://www.phoenixcontact.com/us/products/2963938 Circuit diagram 24 V DC L B1 B2 A1 S11 (+) S12 ( ) PSR-ESA4/2x1/1x2 A2 (+) S33 S21 S22 (GND) ( ) ( ) S34 K3 K4 0V 13 23 31 K3 14 24 32 K4 M K3 K4 N Nov 24, 2022, 3:07 PM Page 6 (10) Safety relays - PSR-SPP- 24UC/ESA4/2X1/1X2 2963938 https://www.phoenixcontact.com/us/products/2963938 Approvals EAC  Approval ID: RU C-DE.A*30.B.01082  UL Listed  cUL Listed Approval ID: FILE E 140324 Approval ID: FILE E 140324  Functional Safety  Functional Safety Approval ID: 01/205/0652.05/22 Approval ID: 968/EZ 404.07/22 cULus Listed Nov 24, 2022, 3:07 PM Page 7 (10) Safety relays - PSR-SPP- 24UC/ESA4/2X1/1X2 2963938 https://www.phoenixcontact.com/us/products/2963938 Classifications ECLASS ECLASS-9.0 27371819 ECLASS-10.0.1 27371819 ECLASS-11.0 27371819 ETIM ETIM 7.0 EC001449 UNSPSC UNSPSC 21.0 39122205 Nov 24, 2022, 3:07 PM Page 8 (10) Safety relays - PSR-SPP- 24UC/ESA4/2X1/1X2 2963938 https://www.phoenixcontact.com/us/products/2963938 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Nov 24, 2022, 3:07 PM Page 9 (10) Safety relays - PSR-SPP- 24UC/ESA4/2X1/1X2 2963938 https://www.phoenixcontact.com/us/products/2963938 Accessories Coding profile Coding profile - CP-MSTB - 1734634 https://www.phoenixcontact.com/us/products/1734634 Coding profile, is inserted into the slot on the plug or inverted header, red insulating material Coding section Coding section - CR-MSTB - 1734401 https://www.phoenixcontact.com/us/products/1734401 Coding section, inserted into the recess in the header or the inverted plug, red insulating material Phoenix Contact 2022 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Nov 24, 2022, 3:07 PM Page 10 (10)