2964636

Power Optocoupler Terminal Block up to 10 A DEK-OV... 1. Brief Description The Phoenix Contact Interface DEK terminals offer complete interface functions in terminal block housings with a width of only 6.2 mm (0.244 in.) These powerful interfaces do not only share the design of the terminal blocks but also their highly convenient application due to the use of standard terminal accessories. The DEK family offers the suitable solution for every industrial voltage valuefor signal input as well as output. High switching power is a standard feature of DEKOV optocoupler terminals. For applications with high switching frequency where electro-mechanical relays rapidly reach the end of their service life you can now apply the wear-resistant power optocoupler DEK-OV terminal block. Integrated LEDs clearly signal the switching state of electronic terminal blocks and thus create a very good overview of the coupling level and the system. Due to colored EB-DIK jumpering, terminals for supply and measuring signals the wiring is easy and efficient. Integrated protection circuits such as free-wheeling diodes, diodes against polarity reversal and surge voltage elements protect coupling components and thus provide optimum system availability. Powerful Optocoupler Terminals Powerful interface modules are required to switch actuators and controlling devices such as contactors, solenoid valves or motors directly using cost-efficient digital output cards (low power, no galvanic isolation but high-pos.). The Phoenix Contact DEK-OV interface terminals offer a complete output interface based on terminal blocks with a width of only 6.2 mm (0.244 in.). The key features of this power optocoupler include: – Wear-resistant switching up to 24 V DC/10 A and 240 V AC/800 mA, – Status display per LED, – Galvanic isolation between input and output 2,5 kV, – integrated protective circuit at the output, – Zero voltage switch at AC output, – Assembly and labeling is the same as for terminal blocks, – Jumpering with the EB-DIK jumpers, – Ambient temperature range – 20 °C (-40˚F) up to + 60 °C (140˚F), – Also available as actuator type. Headquarters: © Phoenix Contact GmbH & Co. KG • Flachsmarktstraße 8 • 32825 Blomberg • Germany Phone +49 - 52 35 - 3 00 • Fax +49 - 52 35 - 34 12 00 • www.phoenixcontact.com Local contact: www.phoenixcontact.com/salesnetwork Power optocoupler terminal blocks up to 10 A 2. Technical Data DC output 3 A A1+ 14 A2- 13+ A2- A A2 + 56 DC output 10 A A1 0 AC output 13 NullspannungsZero voltage Schalter swich A1 13 “…6“ 80 14 A2 DEK-OV... Output up to 10 A max. 8 M3 Connection data Terminal width 6.2 mm (0.244 in.) solid [mm2] stranded 0.2-2.5 0.2-2.5 AWG 24-14 Input voltage Description Power optocoupler terminal block, Input: Common mode voltage output: Common mode voltage Power optocoupler terminal block, acutator principle, Input: Common mode voltage Output: Common mode voltage Power optocoupler terminal block, Input: Common mode voltage output: AC voltage (1) Insertion jumper1), for average and lower level Can be disconnected Type Order No. Pcs. pkt. 5 V DC 12 V DC 24 V DC 5 V DC 12 V DC 24 V DC DEK-OV- 5DC/24DC/3 DEK-OV-12DC/24DC/3 DEK-OV-24DC/24DC/3 DEK-OV- 5DC/24DC/10 DEK-OV-12DC/24DC/10 DEK-OV-24DC/24DC/10 29 41 36 1 29 41 38 7 29 41 37 4 29 61 75 2 29 61 74 9 29 64 32 2 10 10 10 10 10 10 24 V DC DEK-OV-24DC/24DC/3/AKT 29 64 29 6 10 5 V DC 12 V DC 24 V DC DEK-OV- 5DC/240AC/800 DEK-OV-12DC/240AC/800 DEK-OV-24DC/240AC/800 29 64 62 3 29 64 63 6 29 64 64 9 10 10 10 Color: Red Red Red Red Red 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. EB 2-DIK RD EB 3-DIK RD EB 4-DIK RD EB 5-DIK RD EB 10-DIK RD Imax: 26 A 26 A 26 A 26 A 26 A 27 16 69 3 27 16 74 5 27 16 75 8 27 16 76 1 27 16 77 4 100 100 100 100 10 blue blue blue blue blue 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. EB 2-DIK BU EB 3-DIK BU EB 4-DIK BU EB 5-DIK BU EB 10-DIK BU 26 A 26 A 26 A 26 A 26 A 27 16 64 8 27 16 65 1 27 16 66 4 27 16 67 7 27 16 68 0 100 100 100 100 10 blue Red white 80-pos. 80-pos. 80-pos. EB 80-DIK BU EB 80-DIK RD EB 80-DIK WH 26 A 26 A 26 A 27 15 94 0 27 15 95 3 27 15 78 8 5 5 5 PHOENIX CONTACT page 2 from 3 Power Optocoupler Terminal Blocks up to 10 A – DEK-OV Technical Data Input data (Input) Operating voltage range [V DC] ± 20 % Switching level1-signal ("H") 0-signal ("L") Current at nominal voltage [mA] Transmission frequency flimit [Hz] (ohmic load) Input wiring DC 3 A DC 10 A AC 5 12 24 5 12 24 5 12 24 0.8 x UN 0.4 x UN 11 9 7 5 5 4 10 11 11 300 100 10 Operating indicator (LED yellow), protection against polarity reversal (10 A and AC type surge voltage protection) Output data (Output) Operating voltage range Periodical peak off-state voltage Maximum continuous load current Minimum load current Surge current Residual voltage at maximum load current Leakage in the off-state Max. phase shift (inductive load) I2t value I2 x t (t = 10 ms) Switching time ton/toff Output circuit 3… 30 V DC 5… 30 V DC 10-253 V AC, 50/60 Hz – – 600 V 3 A (see ’Derating’) 10 A (see ’Derating’) 0.8 A (see ’Derating’) – – 10 mA – – 30 A (t =10 ms) Approx. 0.2 V < 50 mV