2964762

https://www.phoenixcontact.com/us/products/2964762 Relay Module - EMG 10-REL/KSR- 48/21-LC AU - 2964762 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Relay module, with soldered-in miniature switching relay, gold contact for small loads, 1 PDT, input voltage 48 V AC/DC The figure shows the EMG 10-REL/ KSR-G 24/21-LC variant Product Features  Safe isolation according to DIN EN 50178 between coil and contact  Integrated input circuit and interference suppression circuit     Key commercial data Packing unit 1 pc Custom tariff number 85364900 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 10.6 mm Height 75 mm Depth 62.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 40 °C Ambient temperature (storage/transport) -20 °C ... 70 °C Coil side 10/30/2014   Page 1 / 4 https://www.phoenixcontact.com/us/products/2964762 Relay Module - EMG 10-REL/KSR- 48/21-LC AU - 2964762 Technical data Coil side Nominal input voltage UN 48 V AC/DC Input voltage range in reference to UN 0.9 ... 1.1 Typical input current at UN 8 mA Typical response time 7 ms Typical release time 11 ms Operating voltage display Yellow LED Protective circuit Bridge rectifier Bridge rectifier Surge protection Varistor Contact side Contact type Double contact, 1 PDT Contact material AgPd60, hard gold-plated Maximum switching voltage 30 V AC 36 V DC Maximum inrush current 0.2 A Limiting continuous current 0.5 A Interrupting rating (ohmic load) max. 5 W (at 24 V DC) Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 125 V AC Limiting continuous current 2A Maximum inrush current 2A Interrupting rating (ohmic load) max. 29 W (at 24 V DC) 29 W (at 48 V DC) 29 W (at 60 V DC) 60 VA (for 250 V AC) General Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Mechanical service life Approx. 2 x 10 cycles Standards/regulations IEC 60664 7 EN 50178 IEC 62103 Rated surge voltage / insulation Basic insulation Pollution degree 2 Surge voltage category III Mounting position any Assembly instructions In rows with zero spacing 10/30/2014   Page 2 / 4 https://www.phoenixcontact.com/us/products/2964762 Relay Module - EMG 10-REL/KSR- 48/21-LC AU - 2964762 Technical data Connection data Connection method Screw connection Stripping length 8 mm Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG/kcmil max 12 Conductor cross section AWG/kcmil min. 24 Screw thread M3 Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371001 eCl@ss 7.0 27371001 eCl@ss 8.0 27371001 ETIM ETIM 2.0 EC000196 ETIM 3.0 EC000196 ETIM 4.0 EC000196 ETIM 5.0 EC000196 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39121515 Drawings 10/30/2014   Page 3 / 4 https://www.phoenixcontact.com/us/products/2964762 Relay Module - EMG 10-REL/KSR- 48/21-LC AU - 2964762 Connection diagram 14 11 12 11 A1 A2 Circuit diagram 13 14 A1 A2 Circuit diagram 12 14 11 11 A1 + A2 - Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/30/2014   Page 4 / 4