Extract from the online
catalog
PLC-RSC-230UC/21-21
Order No.: 2967099
The illustration shows the version PLC-RSC- 24DC/21-21
http://eshop.phoenixcontact.net/phoenix/treeViewClick.do?UID=2967099
PLC relay, consisting of base terminal block PLC-BSC.../21 with screw
connection and pluggable miniature relay with power contact, for
assembly on DIN rail NS 35/7.5, 2 PDT, input voltage 230 V AC / 220
V DC
Product notes
WEEE/RoHS-compliant since:
02/14/2006
Commercial data
EAN
4
017918
156503
Pack
10 pcs.
Customs tariff
85364900
Gross weight in pieces
0.0776 KG
Net weight per piece (exclusive packing)
0.06959 KG
Catalog page information
Page 83 (IF-2011)
http://
www.download.phoenixcontact.com
Please note that the data given
here has been taken from the
online catalog. For comprehensive
information and data, please refer
to the user documentation. The
General Terms and Conditions of
Use apply to Internet downloads.
Technical data
Coil side
Nominal input voltage UN
230 V AC (220 V DC)
220 V DC
PHOENIX CONTACT Ltd
http://www.phoenixcontact.co.uk
Page 1 / 6
Apr 16, 2013
PLC-RSC-230UC/21-21 Order No.: 2967099
http://eshop.phoenixcontact.net/phoenix/treeViewClick.do?UID=2967099
Nominal input current at UIN
4.5 mA (at UN = 230 V AC)
4.3 mA (at UN = 220 V DC)
Typical response time
7 ms
Typical release time
10 ms
Operating voltage display
Yes
Protective circuit
Bridge rectifier Bridge rectifier
Contact side
Contact type
Single contact, 2-PDT
Contact material
AgNi
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed
for voltages larger than 250 V (L1, L2, L3) between identical
terminal blocks in adjacent modules. Potential bridging is then
carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage
5 V AC/DC (at 10 mA)
Maximum inrush current
15 A (300 ms)
Min. switching current
10 mA (At 5 V)
Limiting continuous current
6A
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
85 W (for 48 V DC)
60 W (for 60 V DC)
44 W (for 110 V DC)
60 W (for 220 V DC)
1500 VA (for 250 V AC)
General data
Width
14 mm
Height
80 mm
Depth
94 mm
Test voltage relay winding/relay contact
4 kV AC (50 Hz, 1 min.)
Test voltage PDT/PDT
2.5 kV AC (50 Hz, 1 min.)
Ambient temperature (operation)
-40 °C ... 55 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Operating mode
100% operating factor
Mechanical service life
3 x 10 cycles
Inflammability class according to UL 94
V0
Name
Standards/regulations
PHOENIX CONTACT Ltd
http://www.phoenixcontact.co.uk
7
Page 2 / 6
Apr 16, 2013
PLC-RSC-230UC/21-21 Order No.: 2967099
http://eshop.phoenixcontact.net/phoenix/treeViewClick.do?UID=2967099
Standards/regulations
IEC 60664
EN 50178
IEC 62103
Rated surge voltage / insulation
6 kV (safe isolation: control side / contact side)
Pollution degree
2
Surge voltage category
III
Mounting position
Any
Assembly instructions
In rows with zero spacing
Connection data
Connection method
Screw connection
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section stranded min.
0.14 mm²
Conductor cross section stranded max.
2.5 mm²
Conductor cross section AWG/kcmil min.
26
Conductor cross section AWG/kcmil max
14
Stripping length
8 mm
Screw thread
M3
Certificates / Approvals
Certification
cULus Listed, cULus Recognized, GOST, GL
Certifications applied for:
Certification Ex:
Accessories
Item
Designation
Description
NS 35/ 7,5 CU UNPERF
2000MM
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35
mm, length: 2 m
Assembly
0801762
PHOENIX CONTACT Ltd
http://www.phoenixcontact.co.uk
Page 3 / 6
Apr 16, 2013
PLC-RSC-230UC/21-21 Order No.: 2967099
http://eshop.phoenixcontact.net/phoenix/treeViewClick.do?UID=2967099
0801733
NS 35/ 7,5 PERF 2000MM
DIN rail, material: steel galvanized and passivated with a thick
layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm
0801681
NS 35/ 7,5 UNPERF 2000MM
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35
mm, length: 2 m
0801377
NS 35/ 7,5 V2A UNPERF
2000MM
DIN rail, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm,
Color: silver
1201756
NS 35/15 AL UNPERF 2000MM
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick,
material: aluminum, height 15 mm, width 35 mm, length 2000 mm
1201895
NS 35/15 CU UNPERF 2000MM
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15
mm, width 35 mm, length: 2 m
1201730
NS 35/15 PERF 2000MM
DIN rail, material: steel galvanized and passivated with a thick
layer, perforated, height 15 mm, width 35 mm, length: 2000 mm
1201714
NS 35/15 UNPERF 2000MM
DIN rail, material: Steel, unperforated, height 15 mm, width 35
mm, length: 2 m
1201798
NS 35/15-2,3 UNPERF 2000MM
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15
mm, width 35 mm, length: 2 m
2966841
PLC-ATP BK
Separating plate, 2 mm thick, required at the start and end of a
PLC terminal strip. Furthermore, it is used for: visual separation
of groups, safe isolation of different voltages of neighboring PLC
relays in acc. with DIN VDE 0106-101, isolation
2966812
FBST 6-PLC BU
Single plug-in bridge, Length: 6 mm, Number of positions: 2,
Color: blue
2966825
FBST 6-PLC GY
Single plug-in bridge, Length: 6 mm, Number of positions: 2,
Color: gray
2966236
FBST 6-PLC RD
Single plug-in bridge, Length: 6 mm, Number of positions: 2,
Color: red
2967688
FBST 8-PLC GY
Single plug-in bridge, Length: 8 mm, Number of positions: 2,
Color: gray
2967691
FBST 14-PLC BK
Single plug-in bridge, Length: 14 mm, Number of positions: 2,
Color: black
2966692
FBST 500-PLC BU
Continuous plug-in bridge, Length: 500 mm, Color: blue
2966838
FBST 500-PLC GY
Continuous plug-in bridge, Length: 500 mm, Color: gray
2966786
FBST 500-PLC RD
Continuous plug-in bridge, Length: 500 mm, Color: red
1053001
ZB 10:UNBEDRUCKT
Zack marker strip, Strip, white, Unlabeled, Can be labeled with:
Plotter, Mounting type: Snap into tall marker groove, For terminal
block width: 10.2 mm, Lettering field: 10.5 x 10.15 mm
1053014
ZB10,LGS:FORTL.ZAHLEN
Zack marker strip, Strip, white, labeled, Can be labeled with:
Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20,
etc. up to 991 - 1000, Mounting type: Snap into tall marker groove,
For terminal block width: 10.2 mm
Bridges
Marking
PHOENIX CONTACT Ltd
http://www.phoenixcontact.co.uk
Page 4 / 6
Apr 16, 2013
PLC-RSC-230UC/21-21 Order No.: 2967099
http://eshop.phoenixcontact.net/phoenix/treeViewClick.do?UID=2967099
5060883
ZB10/WH-100:UNBEDRUCKT
Zack marker strip, Strip, white, Unlabeled, Can be labeled with:
Plotter, Mounting type: Snap into tall marker groove, For terminal
block width: 10.2 mm
Power terminal block
2966508
PLC-ESK GY
Power terminal block, for the input of up to four potentials, for
mounting on NS 35/7.5
SZF 1-0,6X3,5
Actuation tool, for ST terminal blocks, also suitable for use as a
bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip,
with non-slip grip
Tools
1204517
Diagrams/Drawings
Diagram
Curve A
Maximum permissible continuous voltage
Umax with limiting continuous current on the
contact side (see relevant technical data)
Curve B
Minimum permissible operate voltage Uop
after pre-excitation (see relevant technical
data)
Interrupting rating
Circuit diagram
PHOENIX CONTACT Ltd
http://www.phoenixcontact.co.uk
Page 5 / 6
Apr 16, 2013
PLC-RSC-230UC/21-21 Order No.: 2967099
http://eshop.phoenixcontact.net/phoenix/treeViewClick.do?UID=2967099
Address
PHOENIX CONTACT Ltd
Halesfield 13
Telford Shropshire TF7 4PG,GB
Phone 01952 681 700
Fax 01952 681 799
http://www.phoenixcontact.co.uk
© 2013 Phoenix Contact
Technical modifications reserved;
PHOENIX CONTACT Ltd
http://www.phoenixcontact.co.uk
Page 6 / 6
Apr 16, 2013
