2967109

https://www.phoenixcontact.com/us/products/2967109 Relay Module - PLC-RSC- 24DC/ 1- 1/ACT - 2967109 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PLC-INTERFACE for output functions, consisting of PLC-BSC…/ACT basic terminal block with screw connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 2 N/O contacts (1-1), input voltage 24 V DC Product Features ■ ■ ■ ■ ■ ■ ■ Actuator connected directly to relay module Efficient connection to system cabling using V8 adapter No need for additional modular terminal blocks Time savings of up to 60 % Relay modules with safe isolation according to DIN EN 50178 between coil and contact Space savings of up to 80 % Functional plug-in bridges Key Commercial Data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 69.49 g Custom tariff number 85364190 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 14 mm 04/27/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/2967109 Relay Module - PLC-RSC- 24DC/ 1- 1/ACT - 2967109 Technical data Dimensions Height 80 mm Depth 94 mm Ambient conditions Ambient temperature (operation) -40 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 24 V DC Typical input current at UN 18 mA Typical response time 8 ms Typical release time 10 ms Protective circuit Reverse polarity protection Polarity protection diode Free-wheeling diode Damping diode Operating voltage display Yellow LED Power dissipation for nominal condition 0.43 W Contact side Contact type 2 N/O contacts Contact material AgNi Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) Minimum switching voltage 5 V AC/DC Min. switching current 10 mA Maximum inrush current 8A Limiting continuous current 6A Interrupting rating (ohmic load) max. 140 W (at 24 V DC) 85 W (at 48 V DC) 60 W (at 60 V DC) 40 W (at 110 V DC) 60 W (at 220 V DC) 1500 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.2 A (at 250 V, DC13) 3 A (at 24 V, AC15) 3 A (at 120 V, AC15) 3 A (at 250 V, AC15) 04/27/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/2967109 Relay Module - PLC-RSC- 24DC/ 1- 1/ACT - 2967109 Technical data Connection data input side Connection name Coil side Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 14 Connection data output side Connection name Contact side Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 14 General Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection RT III (Relay) Mechanical service life 3 x 10 cycles Flammability rating according to UL 94 V0 Designation Standards/regulations Standards/regulations IEC 60664 7 EN 50178 IEC 62103 Rated surge voltage/insulation Basic insulation Degree of pollution 3 Overvoltage category III Mounting position any Assembly instructions In rows with zero spacing Standards and Regulations Connection in acc. with standard CUL Designation Standards/regulations Standards/regulations IEC 60664 EN 50178 IEC 62103 04/27/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/2967109 Relay Module - PLC-RSC- 24DC/ 1- 1/ACT - 2967109 Technical data Standards and Regulations Rated surge voltage/insulation Basic insulation Degree of pollution 3 Overvoltage category III Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371001 eCl@ss 7.0 27371001 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC000196 ETIM 3.0 EC000196 ETIM 4.0 EC000196 ETIM 5.0 EC001437 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39121515 Approvals Approvals Approvals UL Recognized / UL Listed / cUL Recognized / cUL Listed / GL / EAC / EAC / cULus Recognized / cULus Listed 04/27/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/2967109 Relay Module - PLC-RSC- 24DC/ 1- 1/ACT - 2967109 Approvals Ex Approvals Approvals submitted Approval details UL Recognized  UL Listed  cUL Recognized  cUL Listed  GL  EAC  EAC  cULus Recognized  cULus Listed  Drawings 04/27/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/2967109 Relay Module - PLC-RSC- 24DC/ 1- 1/ACT - 2967109 Circuit diagram 23 BB 24 A2 13 A1 BB 14 Diagram Curve A Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data) Curve B Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data) Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/27/2016   Page 6 / 6