https://www.phoenixcontact.com/gb/products/2967620
Relay Module - PLC-RSC- 24DC/21HC - 2967620
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PLC-INTERFACE, consisting of PLC-BSC.../21 HC basic terminal block with screw connection and plug-in
miniature relay for a high continuous current, for mounting on DIN rail NS 35/7,5, limiting continuous current
up to 10 A, 1 PDT, input voltage 24 V DC
The illustration shows the version
PLC-RSC-230UC/21HC
Why buy this product
Long electrical service life thanks to 16 A relay
All common input voltages of 12 V DC to 230 V AC
Efficient connection to system cabling using V8 adapter
Safe isolation according to DIN EN 50178 between coil and contact
Max. continuous current of 10 A
Functional plug-in bridges
Key Commercial Data
Packing unit
10 STK
GTIN
GTIN
4017918171643
Weight per Piece (excluding packing)
70.500 g
Custom tariff number
85364900
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
14 mm
Height
80 mm
Depth
94 mm
12/28/2016 Page 1 / 12
https://www.phoenixcontact.com/gb/products/2967620
Relay Module - PLC-RSC- 24DC/21HC - 2967620
Technical data
Ambient conditions
Ambient temperature (operation)
-40 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Coil side
Nominal input voltage UN
24 V DC
Typical input current at UN
18 mA
Typical response time
8 ms
Typical release time
10 ms
Protective circuit
Reverse polarity protection Polarity protection diode
Free-wheeling diode Damping diode
Operating voltage display
Yellow LED
Power dissipation for nominal condition
0.43 W
Contact side
Contact type
1 PDT
Type of switch contact
Single contact
Contact material
AgNi
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for
voltages larger than 250 V (L1, L2, L3) between identical terminal blocks
in adjacent modules. Potential bridging is then carried out with FBST 8PLC... or ...FBST 500...)
Minimum switching voltage
12 V DC (at 10 mA)
Min. switching current
10 mA (at 12 V)
Maximum inrush current
30 A (300 ms)
Limiting continuous current
10 A
6 A (value applies to connections 12. If connections 12 are bridged, the
normal value applies.)
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
58 W (at 48 V DC)
48 W (at 60 V DC)
50 W (at 110 V DC)
80 W (at 220 V DC)
2500 VA (for 250 V AC)
Interrupting rating (ohmic load) max. bridged
144 W (for 24 V DC. Value applies to connections 12. If connections 12
are bridged, the normal value applies.)
1500 VA (for 250 V AC. Value applies to connections 12. If connections
12 are bridged, the normal value applies.)
Switching capacity in acc. with DIN VDE 0660/IEC 60947
2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
6 A (at 24 V, AC15)
6 A (at 120 V, AC15)
6 A (at 250 V, AC15)
12/28/2016 Page 2 / 12
https://www.phoenixcontact.com/gb/products/2967620
Relay Module - PLC-RSC- 24DC/21HC - 2967620
Technical data
Connection data input side
Connection name
Coil side
Connection method
Screw connection
Stripping length
8 mm
Screw thread
M3
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 14
Connection data output side
Connection name
Contact side
Connection method
Screw connection
Stripping length
8 mm
Screw thread
M3
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 14
General
Test voltage relay winding/relay contact
4 kV AC (50 Hz, 1 min.)
Operating mode
100% operating factor
Degree of protection
RT II (Relay)
Mechanical service life
3 x 10 cycles
Flammability rating according to UL 94
V0
Mounting position
any
Assembly instructions
In rows with zero spacing
7
Standards and Regulations
Connection in acc. with standard
CUL
Designation
Standards/regulations
Standards/regulations
IEC 60664
EN 50178
IEC 62103
Rated surge voltage/insulation
6 kV (safe isolation: control side / contact side)
Degree of pollution
2
Overvoltage category
III
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
12/28/2016 Page 3 / 12
https://www.phoenixcontact.com/gb/products/2967620
Relay Module - PLC-RSC- 24DC/21HC - 2967620
Diagram
Circuit diagram
Switching current [A]
20
10
6
4
1
11
2
3
1
2
A2
14
0,5
0,3
0,2
A1
12
0,1
10
20
30
50 70 100
200
Switching voltage [V]
300
1 AC, ohmic load
2 DC, ohmic load
3 DC, L/R = 40 ms
Interrupting rating
Diagram
Curve A
Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data)
Curve B
Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data)
12/28/2016 Page 4 / 12
https://www.phoenixcontact.com/gb/products/2967620
Relay Module - PLC-RSC- 24DC/21HC - 2967620
Classifications
eCl@ss
eCl@ss 5.0
27371601
eCl@ss 5.1
27371601
eCl@ss 6.0
27371601
eCl@ss 7.0
27371601
eCl@ss 8.0
27371601
eCl@ss 9.0
27371601
ETIM
ETIM 2.0
EC001437
ETIM 3.0
EC001437
ETIM 4.0
EC001437
ETIM 5.0
EC001437
ETIM 6.0
EC001437
UNSPSC
UNSPSC 6.01
30211916
UNSPSC 7.0901
39121515
UNSPSC 11
39121515
UNSPSC 12.01
39121515
UNSPSC 13.2
39122334
Approvals
Approvals
Approvals
UL Recognized / UL Listed / cUL Recognized / cUL Listed / GL / EAC / RC FRT / EAC / PRS / cULus Recognized / cULus Listed
Ex Approvals
Approval details
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 172140
12/28/2016 Page 5 / 12
https://www.phoenixcontact.com/gb/products/2967620
Relay Module - PLC-RSC- 24DC/21HC - 2967620
Approvals
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 172140
GL
http://www.gl-group.com/newbuilding/approvals/index.html
46016-03 HH
EAC
7500651.22.01.00244
RC FRT
http://www.rsfgt.ru/en/web/guest/english
B.00094
EAC
EAC-Zulassung
PRS
http://www.prs.pl/
TE/2109/880590/16
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
cULus Listed
Accessories
Accessories
Bridge
12/28/2016 Page 6 / 12
https://www.phoenixcontact.com/gb/products/2967620
Relay Module - PLC-RSC- 24DC/21HC - 2967620
Accessories
Continuous plug-in bridge - FBST 500-PLC RD - 2966786
Continuous plug-in bridge, Length: 500 mm, Color: red
Continuous plug-in bridge - FBST 500-PLC BU - 2966692
Continuous plug-in bridge, Length: 500 mm, Color: blue
Continuous plug-in bridge - FBST 500-PLC GY - 2966838
Continuous plug-in bridge, Length: 500 mm, Color: gray
Single plug-in bridge - FBST 6-PLC RD - 2966236
Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: red
Single plug-in bridge - FBST 6-PLC BU - 2966812
Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: blue
12/28/2016 Page 7 / 12
https://www.phoenixcontact.com/gb/products/2967620
Relay Module - PLC-RSC- 24DC/21HC - 2967620
Accessories
Single plug-in bridge - FBST 6-PLC GY - 2966825
Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: gray
Single plug-in bridge - FBST 8-PLC GY - 2967688
Single plug-in bridge, Length: 8 mm, Number of positions: 2, Color: gray
Single plug-in bridge - FBST 14-PLC BK - 2967691
Single plug-in bridge, Length: 14 mm, Number of positions: 2, Color: black
Controller board
System connection - PLC-V8L/FLK14/OUT - 2299660
System connection - PLC-V8L/FLK14/OUT/M - 2304306
DIN rail
12/28/2016 Page 8 / 12
https://www.phoenixcontact.com/gb/products/2967620
Relay Module - PLC-RSC- 24DC/21HC - 2967620
Accessories
DIN rail, unperforated - NS 35/ 7,5 V2A UNPERF 2000MM - 0801377
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
12/28/2016 Page 9 / 12
https://www.phoenixcontact.com/gb/products/2967620
Relay Module - PLC-RSC- 24DC/21HC - 2967620
Accessories
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Width: 35 mm, Height: 15 mm, Length: 2000 mm, Color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm,
length 2000 mm
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
Labeled terminal marker
Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 10, 11 - 20, etc. up to 991 - 1000, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm,
Lettering field: 10.15 x 10.5 mm
Partition plate
12/28/2016 Page 10 / 12
https://www.phoenixcontact.com/gb/products/2967620
Relay Module - PLC-RSC- 24DC/21HC - 2967620
Accessories
Separating plate - PLC-ATP BK - 2966841
Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual
separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101,
isolation
Power module
Power terminal block - PLC-ESK GY - 2966508
Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB10/WH-100:UNBEDRUCKT - 5060883
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove,
for terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm
Zack marker strip - ZB 10:UNBEDRUCKT - 1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove,
for terminal block width: 10.2 mm, Lettering field: 10.5 x 10.15 mm
Spare parts
12/28/2016 Page 11 / 12
https://www.phoenixcontact.com/gb/products/2967620
Relay Module - PLC-RSC- 24DC/21HC - 2967620
Accessories
Relay socket - PLC-BSC- 24DC/21HC - 2967772
14 mm PLC basic terminal block for high continuous currents with screw connection, without relay or solid-state relay,
for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 24 V DC
Single relay - REL-MR- 24DC/21HC - 2961312
Plug-in miniature power relay, with power contact for high continuous currents, 1 PDT, input voltage 24 V DC
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
12/28/2016 Page 12 / 12
