2981125

Safety relays - PSR-SCP- 24DC/ESD/5X1/1X2/ T 2 2981125 https://www.phoenixcontact.com/us/products/2981125 Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 2 s, plug-in screw connection terminal blocks Your advantages • Fixed delay times of 2 s • 1- and 2-channel control • 3 undelayed and 2 dropout delay contacts Commercial Data Item number 2981125 Packing unit 1 pc Minimum order quantity 1 pc Note Made to Order (non-returnable) Sales Key C18 Product Key DNA132 Catalog Page Page 25 (IF-2009) GTIN 4017918956660 Weight per Piece (including packing) 417.2 g Weight per Piece (excluding packing) 417.2 g Customs tariff number 85371098 Country of origin DE Oct 27, 2022, 5:14 PM Page 1 (8) Safety relays - PSR-SCP- 24DC/ESD/5X1/1X2/ T 2 2981125 https://www.phoenixcontact.com/us/products/2981125 Technical Data Notes Utilization restriction EMC note EMC: class A product, see manufacturer's declaration in the download area Product properties Product type Safety relays Application Emergency stop Safety door Light grid Mechanical service life 10x 106 cycles Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 Insulation characteristics Overvoltage category III Electrical properties Maximum power dissipation for nominal condition 3.6 W Nominal operating mode 100% operating factor Rated insulation voltage 250 V AC Rated surge voltage/insulation Basic insulation 4 kV: between all current paths and housing Safe isolation, reinforced insulation 6 kV: between 13/14, 23/24, 33/34, and the remaining current paths between 13/14, 23/24, 33/34 among one another Input data General Rated control circuit supply voltage US 24 V DC -15 % / +10 % Power consumption at US typ. 3.6 W Rated control supply current IS typ. 150 mA Inrush current 200 mA (at US) < 40 mA (with Us/Ix to S10) < 150 mA (with Us/Ix to S12) > -60 mA (with Us/Ix to S22) < 40 mA (with Us/Ix to S34) < 40 mA (with Us/Ix to S35) Current consumption < 40 mA (with Us/Ix to S10) < 40 mA (with Us/Ix to S12) > -40 mA (with Us/Ix to S22) 0 mA (with Us/Ix to S34) < 5 mA (with Us/Ix to S35) Oct 27, 2022, 5:14 PM Page 2 (8) Safety relays - PSR-SCP- 24DC/ESD/5X1/1X2/ T 2 2981125 https://www.phoenixcontact.com/us/products/2981125 Voltage at input/start and feedback circuit 24 V DC -15 % / +10 % Filter time 1 ms (at A1 in the event of voltage dips at Us) max. 1.5 ms (at S10, S12; test pulse width) 7.5 ms (at S10, S12; test pulse rate) Test pulse rate = 5 x Test pulse width Typical response time < 600 ms (automatic start) < 70 ms (manual start) Typ. starting time with Us < 600 ms (when controlled via A1) Typical release time < 20 ms (when controlled via S11/S12 and S21/S22) < 20 ms (when controlled via A1) Concurrence ∞ Recovery time