2981813

Safety relays - PSR-SPP- 24DC/ESD/4X1/30 2981813 https://www.phoenixcontact.com/us/products/2981813 Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 2 N/O contacts with a fixed dropout delay of 0.1 s ... 30 s, pluggable Push-in terminal block Your advantages • Maximum of 3 undelayed and 2 dropout delay contacts • Manually monitored and automatic activation • Up to Cat. 3/4 and PL d/e in accordance with EN ISO 13849-1, SIL 3 in accordance with IEC 62061, SIL 3 in accordance with IEC 61508 • For emergency stop and safety door monitoring, plus evaluation of light grids • 1- and 2-channel control • Protective labels to prevent manipulation of the set time (PSR-ESD-300) or electronic protection against manipulation (PSR-ESD-30) • Fixed delay times of 0.1 s ... 300 s Commercial Data Item number 2981813 Packing unit 1 pc Minimum order quantity 1 pc Sales Key C18 Product Key DNA131 Catalog Page Page 230 (C-6-2019) GTIN 4046356117265 Weight per Piece (including packing) 229.76 g Weight per Piece (excluding packing) 209.68 g Customs tariff number 85371098 Country of origin DE Nov 24, 2022, 10:33 AM Page 1 (9) Safety relays - PSR-SPP- 24DC/ESD/4X1/30 2981813 https://www.phoenixcontact.com/us/products/2981813 Technical Data Product properties Product type Safety relays Application Emergency stop Safety door Light grid Mechanical service life approx. 107 cycles Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 Insulation characteristics Overvoltage category II Electrical properties Maximum power dissipation for nominal condition 1.8 W Nominal operating mode 100% operating factor Rated insulation voltage 250 V Rated surge voltage/insulation 4 kV / basic insulation Input data General Nominal input voltage UN 24 V DC Input voltage range in reference to UN 0.85 ... 1.1 Typical input current at UN 75 mA DC Voltage at input/start and feedback circuit approx. 24 V DC Typical response time 150 ms (Monitored/manual and auto-start) Typical release time 20 ms (Undelayed contacts) 100 ms (delayed contacts) Typical release time range 0.1 s ... 30 s Recovery time 330 ms (Restart) 1 s (Electric torque) Protective circuit Suppressor diode, 33 V DC Max. permissible overall conductor resistance 500 Ω (Input and reset circuit at UN) Operating voltage display Green LED Status display LED K1/K2 and K3(t)/K4(t), green Output data Contact type 4 enabling current paths Contact material AgSnO2 Maximum switching voltage 250 V AC/DC Minimum switching voltage 15 V AC/DC Limiting continuous current 6 A (N/O contact) Maximum inrush current 6A Nov 24, 2022, 10:33 AM Page 2 (9) Safety relays - PSR-SPP- 24DC/ESD/4X1/30 2981813 https://www.phoenixcontact.com/us/products/2981813 Inrush current, minimum 25 mA Sq. Total current 120 A2 (see to derating) Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms) 288 W (48 V DC, τ = 0 ms) 90 W (110 V DC, τ = 0 ms) 88 W (220 V DC, τ = 0 ms) 1500 VA (250 V AC, τ = 0 ms) Maximum interrupting rating (inductive load) 42 W (24 V DC, τ = 40 ms) 33 W (48 V DC, τ = 40 ms) 25 W (110 V DC, τ = 40 ms) 23 W (220 V DC, τ = 40 ms) Switching capacity min. 0.4 W Switching capacity (360/h cycles) on request Switching capacity (3600/h cycles) 3 A (24 V (DC13)) 3 A (230 V (AC15)) Output fuse 10 A gL/gG NEOZED (N/O contact) Connection data Connection technology pluggable yes Conductor connection Connection method Push-in connection Conductor cross section solid 0.2 mm² ... 1.5 mm² Conductor cross section flexible 0.2 mm² ... 1.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) Conductor cross-section AWG 24 ... 16 Stripping length 8 mm Dimensions Width 22.5 mm Height 112 mm Depth 114.5 mm Material specifications Housing material Polyamide Characteristics Safety data Stop category 0 1 Safety data: EN ISO 13849 Nov 24, 2022, 10:33 AM Page 3 (9) Safety relays - PSR-SPP- 24DC/ESD/4X1/30 2981813 https://www.phoenixcontact.com/us/products/2981813 Category 4 Performance level (PL) e Safety Integrity Level (SIL) 3 SFFSingle-channel 99.98 % SFFTwo-channel 97.62 % Mean time to a dangerous failure (MTTFD) 63311 Years Probability of a hazardous failure per hour (PFHD) 1.80 x 10-9 Diagnostic coverage (DC) 99 % Proof test interval 240 Months Duration of use 240 Months Environmental and real-life conditions Ambient conditions Degree of protection IP20 Min. degree of protection of inst. location IP54 Ambient temperature (operation) -20 °C ... 45 °C Ambient temperature (storage/transport) -40 °C ... 70 °C Maximum altitude ≤ 2000 m (Above sea level) Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing) Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing) Shock 15g Vibration (operation) 10 Hz ... 150 Hz, 2g Standards and regulations Air clearances and creepage distances between the power circuits Standards/regulations DIN EN 60947-1 Mounting Mounting type DIN rail mounting Mounting position any Nov 24, 2022, 10:33 AM Page 4 (9) Safety relays - PSR-SPP- 24DC/ESD/4X1/30 2981813 https://www.phoenixcontact.com/us/products/2981813 Drawings Circuit diagram L+ (L1) L1 L2 L3 Light grid Receiver Transmitter A1 S 11 (Clock) PSR-ESD-30 A2 S 12 ( ) OSSD 1 OSSD 2 S 21 (Clock) S 22 ( ) ( ) ( ) S 34 S 35