2986041

https://www.phoenixcontact.com/us/produkte/2986041 Extension module - PSR-SPP- 24DC/TS/SDI8/SDIO4 - 2986041 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Module for I/O extension of the PSR-TRISAFE master module with 8 safe inputs and 4 safe, freely parameterizable channels (safe inputs or outputs), easy connection via PSR-TBUS DIN rail connector, width: 22.5 mm The figure shows a version with a screw connection Why buy this product  Flexible extension with safe inputs and outputs  Narrow 22.5 mm housing  4 safe digital outputs or 4 additional digital inputs (that can be configured using SAFECONF)  Multifunctional use for a wide range of safety functions  Easy graphical configuration instead of complex programming  Quick startup thanks to user-friendly simulation and test options  Including PSR-TBUS plug-in connector (DIN rail connector) for adapting to the PSR-TRISAFE-M master module  Up to Cat. 4/PL e according to ISO 13849-1, SILCL 3 according to IEC 62061, SIL 3 according to IEC 61508  8 safe digital inputs  2 alarm outputs or 2 clock outputs (that can be configured using SAFECONF)   Key commercial data Packing unit 0 Minimum order quantity 1 Catalog page Page 31 (IF-2011) GTIN Custom tariff number 85389091 Country of origin GERMANY Technical data Input data Nominal input voltage UN 24 V DC (A1 / A2) Input voltage range in reference to UN 0.85 ... 1.1 Typical input current at UN 100 mA Maximum response time < 30 ms Bypassing voltage dips 20 ms Recovery time < 10 s 05.06.2012   Page 1 / 4 https://www.phoenixcontact.com/us/produkte/2986041 Extension module - PSR-SPP- 24DC/TS/SDI8/SDIO4 - 2986041 Technical data Input data Protective circuit Surge protection Suppressor diode Status display 2 LEDs (green, red) Number of safe inputs 12 (of which 4 can be configured as input or output) Nominal voltage UN 24 V DC Typical current consumption 4 mA Signal level "0" signal 11 V Permissible cable length 2000 m Error detection time at 1-channel structure