2987338

REL-MR- 24DC/ 1ICT - Single relay 2987338 https://www.phoenixcontact.com/us/products/2987338 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Pluggable miniature power relay, with tungsten pre-contact for high switch-on currents up to 800 A peaks, 1 N/O contact, input voltage: 24 V DC Your advantages • Safe isolation between coil and contact side • High degree of protection up to RT III depending on type (wash-proof) • Power contacts up to 16 A Commercial data Item number 2987338 Packing unit 1 pc Minimum order quantity 10 pc Sales key C460 Product key CK6195 GTIN 4046356491112 Weight per piece (including packing) 16.95 g Weight per piece (excluding packing) 16.95 g Customs tariff number 85364190 Country of origin AT Jan 8, 2024, 9:04 AM Page 1 (12) REL-MR- 24DC/ 1ICT - Single relay 2987338 https://www.phoenixcontact.com/us/products/2987338 Technical data Product properties Product type Single relay Operating mode 100% operating factor Mechanical service life 3x 107 cycles Insulation characteristics Insulation Safe isolation, reinforced insulation Insulation characteristics Insulation Safe isolation, reinforced insulation Overvoltage category III Pollution degree 3 Electrical properties Maximum power dissipation for nominal condition 0.41 W Test voltage (Winding/contact) 5 kV AC (50 Hz, 1 min., winding/contact) Rated insulation voltage 250 V AC Rated surge voltage 6 kV Input data Coil side Nominal input voltage UN 24 V DC Input voltage range 19.2 V DC ... 54 V DC Input voltage range in reference to UN see diagram Drive and function monostable Drive (polarity) non-polarized Typical input current at UN 17 mA Typical response time 8 ms Typical release time 3 ms Coil resistance 1440 Ω ±10 % (20 °C) Output data Switching Contact switching type 1 N/O contact Type of switch contact Single contact Contact material AgSnO Maximum switching voltage 250 V AC/DC Minimum switching voltage 12 V (100 mA) Limiting continuous current 16 A Maximum inrush current 165 A (20 ms) 800 A (200 µs) Jan 8, 2024, 9:04 AM Page 2 (12) REL-MR- 24DC/ 1ICT - Single relay 2987338 https://www.phoenixcontact.com/us/products/2987338 Min. switching current 100 mA (at 12 V DC) Interrupting rating (ohmic load) max. 384 W (at 24 V DC) 58 W (at 48 V DC) 48 W (at 60 V DC) 50 W (at 110 V DC) 80 W (at 220 V DC) 4000 VA (for 250 V AC) Switching capacity min. 1200 mW Switching capacity 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.2 A (at 250 V, DC13) 6 A (at 24 V, AC15) 6 A (at 120 V, AC15) 6 A (at 250 V, AC15) Connection data Connection method Plug / solder connection Dimensions Dimensional drawing Width 12.7 mm Height 29 mm Depth 15.7 mm Environmental and real-life conditions Ambient conditions Degree of protection RT II Ambient temperature (operation) -40 °C ... 85 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Altitude ≤ 2000 m Approvals Corrosive gas test Identification ISA-S71.04. G3 Harsh Group EN 60068-2-60 Standards and regulations Standards/regulations EN 50178 EN 61810-1 Jan 8, 2024, 9:04 AM Page 3 (12) REL-MR- 24DC/ 1ICT - Single relay 2987338 https://www.phoenixcontact.com/us/products/2987338 Mounting Mounting type Plug-in mounting Assembly instructions Can be aligned without spacing (> 70 °C ≥ 2.5 mm) Mounting position any Jan 8, 2024, 9:04 AM Page 4 (12) REL-MR- 24DC/ 1ICT - Single relay 2987338 https://www.phoenixcontact.com/us/products/2987338 Drawings HR [%] Diagram 100 80 60 40 20 0 -40 A B -20 0 20 40 60 80 100  [°C] Permissible humidity for operation and storage. The maximum permissible ambient temperature as specified in the data sheet must be observed.   Area A: Ice buildup at ambient temperatures ≤ 0°C must be prevented Area B: Condensation at ambient temperatures > 0°C must be prevented   On 30 full days that are naturally distributed across an entire year, a humidity level of 95% is permissible at an ambient temperature ≤ 25°C. Dimensional drawing 12,7 3,6 15,7 29 Jan 8, 2024, 9:04 AM Page 5 (12) REL-MR- 24DC/ 1ICT - Single relay 2987338 https://www.phoenixcontact.com/us/products/2987338 Diagram U UN 3 2,5 A 2 1,5 1 0,5 B 0 10 20 30 40 50 60 70 80 90 100 TU [°C] Curve A Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data) Curve B Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data) Circuit diagram A1 A2 13 14 Jan 8, 2024, 9:04 AM Page 6 (12) REL-MR- 24DC/ 1ICT - Single relay 2987338 https://www.phoenixcontact.com/us/products/2987338 Drilling plan/solder pad geometry 1,3 5 1,28 a = pitch division 2.5 mm Jan 8, 2024, 9:04 AM Page 7 (12) REL-MR- 24DC/ 1ICT - Single relay 2987338 https://www.phoenixcontact.com/us/products/2987338 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/2987338  cUL Recognized  UL Recognized Approval ID: FILE E 228652 Approval ID: FILE E 228652  EAC  EAC Approval ID: TR_TS_D_00573_c Approval ID: RU*C-DE.*08.B.00010  VDE Zeichengenehmigung Approval ID: 40007758 cULus Recognized Jan 8, 2024, 9:04 AM Page 8 (12) REL-MR- 24DC/ 1ICT - Single relay 2987338 https://www.phoenixcontact.com/us/products/2987338 Classifications ECLASS ECLASS-11.0 27371601 ECLASS-12.0 27371601 ECLASS-13.0 27371601 ETIM ETIM 9.0 EC001437 UNSPSC UNSPSC 21.0 39122300 Jan 8, 2024, 9:04 AM Page 9 (12) REL-MR- 24DC/ 1ICT - Single relay 2987338 https://www.phoenixcontact.com/us/products/2987338 Environmental product compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Jan 8, 2024, 9:04 AM Page 10 (12) REL-MR- 24DC/ 1ICT - Single relay 2987338 https://www.phoenixcontact.com/us/products/2987338 Accessories RIF-1-BPT/2X21 - Relay base 2900931 https://www.phoenixcontact.com/us/products/2900931 Relay base RIF-1..., for miniature power relay with 1 or 2 changeover contacts or solid-state relays of the same design, Push-in connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5 RIF-1-BSC/2X21 - Relay base 2900930 https://www.phoenixcontact.com/us/products/2900930 RIF-1... relay base, for miniature power relay with 1 or 2 changeover contacts or identical solid-state relays, screw connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5 Jan 8, 2024, 9:04 AM Page 11 (12) REL-MR- 24DC/ 1ICT - Single relay 2987338 https://www.phoenixcontact.com/us/products/2987338 PLC-RSC- 24DC/ 1ICT/ACT - Relay Module 1078680 https://www.phoenixcontact.com/us/products/1078680 PLC-INTERFACE for high inrush currents, consisting of PLC-BSC.../1 IC/ACT basic terminal block with screw connection and pluggable miniature relay, for mounting on DIN rail NS 35/7.5, max. inrush current up to 800 A, 1 N/O contact, 24 V DC input voltage PLC-RPT- 24DC/ 1ICT/ACT - Relay Module 1078683 https://www.phoenixcontact.com/us/products/1078683 PLC-INTERFACE for high inrush currents, consisting of PLC-BPT.../1 IC/ACT basic terminal block with push-in connection and pluggable miniature relay, for mounting on DIN rail NS 35/7,5, max. inrush current up to 800 A, 1 N/O contact, input voltage 24 V DC Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 9:04 AM Page 12 (12)