2989226

Extract from the online catalog     FL SWITCH SMCS 8TX Order No.: 2989226   ne nt s. Smart Managed Compact Switch with eight RJ45 Fast Ethernet ports. co   m http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2989226 po Commercial data 4046356451864 Note Made-to-order om GTIN (EAN) sales group Product notes WEEE/RoHS-compliant since: 11/03/2008 K000 1 pcs. Customs tariff Weight/Piece in ec Pack 0.7493 KG Page 184 (AX-2009) on l Catalog page information 85176200 http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Product description Installation notes The device is designed for installation in zone 2. Installation, operation, and servicing may only be carried out by qualified personnel. PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 1 / 5 Jul 22, 2010 FL SWITCH SMCS 8TX Order No.: 2989226 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2989226 Follow the installation instructions described in the operating instructions. When installing and operating the device, the applicable safety directives (including national safety directives), accident prevention regulations, as well as general technical regulations, must be observed. The safety-relevant data can be found in the package slip. Access to the circuits within the device is not permitted. Do not repair the device yourself, but replace it with an equivalent device. Repairs may be carried out only by the manufacturer. The IP20 protection (IEC 60529/EN60529) of the device is intended for use in a clean and dry environment. The device must not be subject to mechanical strain and/or thermal loads, which exceed the limits described. The device is not designed for use in environments with danger of dust explosions. m The DIN rail must be connected to protective earth ground. Installation in zone 2 s. co Observe the specified conditions for use in potentially explosive areas! At the time of installation, use an approved housing (minimum protection IP54), which meets the requirements of EN 60079-15. Observe the requirements of the EN 60079-14. nt The snapping of the switches and the connection and disconnecting lines are permissible only if they are not live. ne The unintentional disconnection from the RJ45 plug is prevented by appropriate measures, for example with a FL PATCH GUARD or the FL PATCH SAFE CLIP. po In zone 2, only connect devices to the supply and signal circuits that are suitable for operation in potentially explosive areas of zone 2 and the conditions at the installation location. om The device should be switched off and immediately removed from the Ex area if it is damaged, or has been overloaded, inappropriately stored or has malfunctions. Interfaces Interface No. of ports on l Type of connection in ec Technical data Ethernet 8 RJ45 Transmission physics Copper Transmission speed 10/100 MBit/s Transmission length 100 m (per segment) Signal LEDs Supply voltage, data transmission, error, link, activity Interface Serial (RS-232) Type of connection RS-232-C, 6-pos. MINI-DIN female connector (PS/2) No. of ports 8 Transmission speed 10/100 MBit/s PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 2 / 5 Jul 22, 2010 FL SWITCH SMCS 8TX Order No.: 2989226 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2989226 Function Store-and-forward switch complies with IEEE 802.3 2 priority classes as per IEEE 802.1 P TCP/IP protocol, BootP-capable, port-mirroring, integrated web server function, multicast filtering, IGMP snooping, VLAN, Rapid Spanning Tree (RSTP), Profinet IO Device, media redundancy protocol (MRP). Management Web based management, SNMP or over V.24 (RS-232) Supported browsers Internet Explorer 5.5 or higher Redundancy Spanning Tree 802.1d, Rapid Spanning Tree 802.1w, Fast Ring Detection, Media Redundancy Protocol (MRP) as per IEC 62439 Status and diagnostics displays Per Ethernet 2 status LEDs: LINK and status activity with switchover, 100, full-duplex, supply voltage Us1 and Us2 (redundant supply voltage) and FAIL co m Basic functionality Network extension parameters Network, line and star structure: any Maximum conductor length ((twisted pair) 100 m nt s. Cascading depth ne Supply voltage 24 V DC Residual ripple 3.6 VPP (within the permitted voltage range) po Supply voltage Typical current consumption General data in ec Weight 18 V DC ... 32 V DC om Range of supply voltages Width Height on l Depth 600 mA (at US = 24 V DC) 650 g 128 mm 100 mm 69 mm Degree of protection IP20 Ambient temperature (operation) 0 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Electromagnetic compatibility Conformance with EMC directive 2004/108/EC Emitted interference EN 61000-6-3:2001+A11 Immunity to interference EN 61000-6-2:2005 PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 3 / 5 Jul 22, 2010 FL SWITCH SMCS 8TX Order No.: 2989226 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2989226 Certificates / Approvals CUL Listed, UL Listed on l in ec om po ne nt s. co m Certification PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 4 / 5 Jul 22, 2010 FL SWITCH SMCS 8TX Order No.: 2989226 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2989226 Address s. co m PHOENIX CONTACT Deutschland GmbH Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 12000 Fax +49 5235 3 41200 http://www.phoenixcontact.de on l in ec om po ne nt © 2010 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 5 / 5 Jul 22, 2010