https://www.phoenixcontact.com/us/products/2989831
Industrial Ethernet Switch - FL SWITCH LM 4TX/2FX ST-E - 2989831
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Ethernet Lean Managed Switch with four 10/100 Mbps RJ45 ports and two 100 Mbps FX-ST multi-mode ports,
preconfigured for EtherNet/IP™
Product Description
The compact lean managed switches (LM) make it possible to set up flexible and economical managed Ethernet networks in an automation
environment. Its huge range of connection variants and extended temperature range of -40 °C to +70 °C enable it to perfectly cover the requirements of
industrial applications. The integrated software allows networks to be redundantly set up, diagnosed and monitored using IT standard protocols.
Your advantages
Web-based management, SNMP
Compact housing
Comprehensive fiber optic versions
Configuration can be stored externally
-40°C ... +70°C ambient temperature
Configurable alarm contact
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356342483
Weight per Piece (excluding packing)
320.000 g
Custom tariff number
85176200
Country of origin
Germany
Technical data
Dimensions
Width
45 mm
12/14/2019 Page 1 / 7
https://www.phoenixcontact.com/us/products/2989831
Industrial Ethernet Switch - FL SWITCH LM 4TX/2FX ST-E - 2989831
Technical data
Dimensions
Height
99 mm
Depth
112 mm
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-40 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
30 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
30 % ... 95 % (non-condensing)
Air pressure (operation)
80 kPa ... 108 kPa (2000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 108 kPa (3000 m above sea level)
Interfaces
Interface
Ethernet (RJ45)
No. of ports
4 (RJ45 ports)
Note on the connection method
Auto negotiation and autocrossing
Transmission physics
Copper
Transmission speed
10/100 Mbps
Transmission length
100 m (per segment)
Interface
Ethernet FO
No. of ports
2 (ST multi-mode)
Transmission physics
multi-mode fiberglass
Transmission speed
100 Mbps (full duplex)
Transmission length
8000 m (fiberglass with F-G 62.5/125 0.7 dB/km F1000)
6400 m (fiberglass with F-G 50/125 0.7 dB/km F1200)
3000 m (fiberglass with F-G 62.5/125 2.6 dB/km F600)
2800 m (fiberglass with F-G 50/125 1.6 dB/km F800)
Wavelength
1300 nm
Interface
Serial (RS-232)
Connection method
RS-232-C, 6-pos. MINI-DIN socket (PS/2)
Function
Basic functions
Store-and-forward switch complies with IEEE 802.3, 2 priority classes
according to IEEE 802.1p, TCP/IP protocol, BootP-compatible, port
mirroring, integrated web server function, multicast filtering, IGMP
snooping, VLAN, Rapid Spanning Tree (RSTP), DHCP server, PTCP filter
Management
Web-based management (HTTP)
SNMP v1/v2
Serial interface (V.24)
Diagnostic functions
1:1-Portmirroring
12/14/2019 Page 2 / 7
https://www.phoenixcontact.com/us/products/2989831
Industrial Ethernet Switch - FL SWITCH LM 4TX/2FX ST-E - 2989831
Technical data
Function
Filter functions
Quality of Service
VLAN (up to 8 VLANs)
IGMP Query
Auto-Query-Port
Extended Multicast Filtering
Redundancy
STP (Spanning Tree Protocol)
RSTP (Rapid Spanning Tree Protocol)
FRD (Fast Ring Detection)
Large Tree Support
Supported browsers
Internet Explorer 5.5 or higher
PROFINET conformance class
Conformance-Class A
Status and diagnostic indicators
LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet
port (Link/Activity and Speed)
Network expansion parameters
Cascading depth
Network, linear, and star structure: any
Maximum conductor length (twisted pair)
100 m
Supply voltage
Supply voltage
24 V DC (redundant)
Residual ripple
3.6 VPP (within the permitted voltage range)
Supply voltage range
18.5 V DC ... 30.5 V DC
Typical current consumption
250 mA (at US = 24 V DC)
General
Mounting type
DIN rail
Type AX
Block design
Net weight
230 g
Connection data
Connection method
Screw connection
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
Stripping length
7 mm
Standards and Regulations
12/14/2019 Page 3 / 7
https://www.phoenixcontact.com/us/products/2989831
Industrial Ethernet Switch - FL SWITCH LM 4TX/2FX ST-E - 2989831
Technical data
Standards and Regulations
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Type of test
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result
Operation/Storage/Transport: 5g, 150 Hz, Criterion 3
Noise emission
EN 61000-6-3/-4
Noise immunity
EN 61000-6-2:2005
Vibration (storage/transport)
5g, 150 Hz, in acc. with IEC 60068-2-6
Vibration (operation)
in acc. with IEC 60068-2-6: 5g, 150 Hz
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Classifications
eCl@ss
eCl@ss 10.0.1
19170401
eCl@ss 4.0
27250500
eCl@ss 4.1
27250500
eCl@ss 5.0
19030100
eCl@ss 5.1
19030100
eCl@ss 6.0
19170100
eCl@ss 7.0
19170106
eCl@ss 8.0
19170106
eCl@ss 9.0
19170106
ETIM
ETIM 2.0
EC000734
ETIM 3.0
EC000734
ETIM 4.0
EC000734
ETIM 5.0
EC000734
ETIM 6.0
EC000734
ETIM 7.0
EC000734
UNSPSC
UNSPSC 6.01
43172901
UNSPSC 7.0901
43201404
UNSPSC 11
43172015
UNSPSC 12.01
43201410
12/14/2019 Page 4 / 7
https://www.phoenixcontact.com/us/products/2989831
Industrial Ethernet Switch - FL SWITCH LM 4TX/2FX ST-E - 2989831
Classifications
UNSPSC
UNSPSC 13.2
43222612
Accessories
Accessories
Data cable preassembled
FO patch cable - FL MM PATCH 1,0 SC-ST - 2901809
Assembled FO cable, break out cable, multimode fiberglass 50/125 µm (OM2), connector: SC duplex/B-FOC(ST), degree
of protection: IP20, for installation in cable ducts or control cabinets, length: 1 m
Drivers and interfaces
Software - FL SNMP OPC SERVER V3 - 2701139
SNMP-OPC server, German and English, for monitoring and configuration of SNMP-capable equipment in HMI and
SCADA systems
Software - FL SNMP OPC AGENT V3 - 2701136
SNMP-OPC agent, German and English, for integrating OPC-based automation solutions in company-wide network
management systems
End block
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
12/14/2019 Page 5 / 7
https://www.phoenixcontact.com/us/products/2989831
Industrial Ethernet Switch - FL SWITCH LM 4TX/2FX ST-E - 2989831
Accessories
Mounting rail adapter
DIN rail adapter - FL DIN RA - 2891053
The FL DIN RA is installed in a standard, 19-inch rack (EIA-310-D, IEC 60297-3-100) to allow DIN rail mounted
equipment to be rack mounted.
Patch cable
Patch cable - FL CAT5 PATCH 1,0 - 2832276
Patch cable, CAT5, assembled, 1 m
Programming cable
Connecting cable - COM CAB MINI DIN - 2400127
Connecting cable, for connecting the controller to a PC (RS-232) for PC WORX with flow control, 3 m in length
Protective cap
Dust protection - FL RJ45 PROTECT CAP - 2832991
Dust protection caps for RJ45 socket
12/14/2019 Page 6 / 7
https://www.phoenixcontact.com/us/products/2989831
Industrial Ethernet Switch - FL SWITCH LM 4TX/2FX ST-E - 2989831
Accessories
Software - IPASSIGN - 2701094
IPAssign is an easy to use tool for setting the IP address of devices which rely on BOOTP. No installation or
administrative rights are required to use IPAssign.
This product is free and only available from the "Downloads" tab.
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
12/14/2019 Page 7 / 7
