3006784

https://www.phoenixcontact.com/us/products/3006784 Knife disconnect terminal block - ZDMTK 2,5 BU - 3006784 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Knife disconnect terminal block, Connection type: Spring-cage connection, Cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, Nominal current: 16 A, Nominal voltage: 400 V, Length: 107 mm, Width: 6.2 mm, Color: blue, Assembly: NS 35/7,5, NS 35/15 The figure shows a version of the article Product Features  Disconnect knife for one level   Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 26.32 GRM Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 2 Number of connections 4 Color blue Insulating material PA Inflammability class according to UL 94 V0 Maximum load current 20 A (with 4 mm² conductor cross section) Rated surge voltage 6 kV Pollution degree 3 Surge voltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 10/30/2014   Page 1 / 4 https://www.phoenixcontact.com/us/products/3006784 Knife disconnect terminal block - ZDMTK 2,5 BU - 3006784 Technical data General Nominal current IN 16 A (the maximum load current must not be exceeded by the total current of all connected conductors) Nominal voltage UN 400 V Open side panel nein Dimensions Width 6.2 mm Length 107 mm Height NS 35/7,5 55 mm Height NS 35/15 62.5 mm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, max. Connection method Spring-cage connection Minimum stripping length 8 mm Maximum stripping length 10 mm Classifications eCl@ss eCl@ss 4.0 27141117 eCl@ss 4.1 27141117 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141126 10/30/2014   Page 2 / 4 https://www.phoenixcontact.com/us/products/3006784 Knife disconnect terminal block - ZDMTK 2,5 BU - 3006784 Classifications ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 5.0 EC000902 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Drawings Circuit diagram Circuit diagram 1 = cover (only optional as terminal block is closed) 3 = fixed bridge 4 = jumper 10/30/2014   Page 3 / 4 https://www.phoenixcontact.com/us/products/3006784 Knife disconnect terminal block - ZDMTK 2,5 BU - 3006784 5 = insulation plate 6 = partition plate Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/30/2014   Page 4 / 4