3007110

https://www.phoenixcontact.com/us/products/3007110 Feed-through terminal block - UDK 4-P/P - 3007110 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Single-level terminal block with two-sided double connection, test socket screws, cross section: 0.2 - 2.5 mm², AWG: 30 - 10, width: 6.2 mm, color: gray Similar figure   Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 15.68 GRM Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 4 Color gray Insulating material PA Inflammability class according to UL 94 V2 Maximum load current 32 A (with 6 mm² conductor cross section) Rated surge voltage 8 kV Pollution degree 3 Surge voltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Maximum load current (lower level) 32 A (with 6 mm² conductor cross section) Nominal current IN (lower level) 32 A (the maximum load current must not be exceeded by the total current of all connected conductors) Nominal voltage UN 630 V 11/03/2014   Page 1 / 4 https://www.phoenixcontact.com/us/products/3007110 Feed-through terminal block - UDK 4-P/P - 3007110 Technical data General Maximum load current (upper level) 32 A (with 6 mm² conductor cross section) Open side panel ja Dimensions Width 6.2 mm Length 63.5 mm Height NS 35/7,5 47 mm Height NS 35/15 54.5 mm Height NS 32 52 mm Connection data Note Terminal point Connection in acc. with standard IEC 60947-7-1 Connection method Screw connection with test socket screws Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 10 Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 4 mm² Min. AWG conductor cross section, stranded 24 Max. AWG conductor cross section, stranded 12 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 4 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 1.5 mm² Cross section with insertion bridge, solid max. 2.5 mm² Cross section with insertion bridge, stranded max. 2.5 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² 11/03/2014   Page 2 / 4 https://www.phoenixcontact.com/us/products/3007110 Feed-through terminal block - UDK 4-P/P - 3007110 Technical data Connection data Cross section with insertion bridge, solid max. 2.5 mm² Cross section with insertion bridge, stranded max. 2.5 mm² Stripping length 8 mm Internal cylindrical gage A3 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals GOST 11/03/2014   Page 3 / 4 https://www.phoenixcontact.com/us/products/3007110 Feed-through terminal block - UDK 4-P/P - 3007110 Approvals Ex Approvals Approvals submitted Approval details GOST  Drawings Circuit diagram Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 11/03/2014   Page 4 / 4