https://www.phoenixcontact.com/us/products/3024465
Sensor/actuator terminal block - VIOK 1,5-3D/PE-EX - 3024465
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Sensor/actuator terminal block, connection method: Screw connection, cross section: 0.2 mm² - 4 mm², AWG: 24
- 12, width: 6.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4017918282790
Weight per Piece (excluding packing)
27.200 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of levels
4
Number of connections
7
Nominal cross section
2.5 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V2
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
03/30/2021 Page 1 / 14
https://www.phoenixcontact.com/us/products/3024465
Sensor/actuator terminal block - VIOK 1,5-3D/PE-EX - 3024465
Technical data
General
Connection in acc. with standard
IEC 60947-7-1/IEC 60947-7-2
Nominal current IN
24 A
Maximum load current
26 A (with a 2.5 mm² conductor cross section)
Nominal voltage UN
400 V (when using EB insertion bridges, the nominal voltage is reduced to
250 V.)
Open side panel
No
Dimensions
Width
6.2 mm
Length
82.5 mm
Height NS 35/7,5
70 mm
Height NS 35/15
77.5 mm
Connection data
Note
Please observe the current carrying capacity of the DIN rails.
Connection method
Screw connection
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Cross section with insertion bridge, solid max.
4 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Cross section with insertion bridge, solid max.
4 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Stripping length
8 mm
Internal cylindrical gage
A3
Screw thread
M3
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
Ambient conditions
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
03/30/2021 Page 2 / 14
https://www.phoenixcontact.com/us/products/3024465
Sensor/actuator terminal block - VIOK 1,5-3D/PE-EX - 3024465
Technical data
Ambient conditions
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1/IEC 60947-7-2
Flammability rating according to UL 94
V2
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 10.0.1
27141128
eCl@ss 11.0
27141128
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141128
eCl@ss 9.0
27141128
ETIM
ETIM 2.0
EC000900
ETIM 3.0
EC000900
ETIM 4.0
EC000900
ETIM 6.0
EC000900
ETIM 7.0
EC000900
03/30/2021 Page 3 / 14
https://www.phoenixcontact.com/us/products/3024465
Sensor/actuator terminal block - VIOK 1,5-3D/PE-EX - 3024465
Classifications
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Approvals
Approvals
Approvals
EAC / EAC
Ex Approvals
ATEX
Approval details
EAC
EAC-Zulassung
EAC
RU CDE.BL08.B.00534
Accessories
Accessories
DIN rail
03/30/2021 Page 4 / 14
https://www.phoenixcontact.com/us/products/3024465
Sensor/actuator terminal block - VIOK 1,5-3D/PE-EX - 3024465
Accessories
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
03/30/2021 Page 5 / 14
https://www.phoenixcontact.com/us/products/3024465
Sensor/actuator terminal block - VIOK 1,5-3D/PE-EX - 3024465
Accessories
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
03/30/2021 Page 6 / 14
https://www.phoenixcontact.com/us/products/3024465
Sensor/actuator terminal block - VIOK 1,5-3D/PE-EX - 3024465
Accessories
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
03/30/2021 Page 7 / 14
https://www.phoenixcontact.com/us/products/3024465
Sensor/actuator terminal block - VIOK 1,5-3D/PE-EX - 3024465
Accessories
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
03/30/2021 Page 8 / 14
https://www.phoenixcontact.com/us/products/3024465
Sensor/actuator terminal block - VIOK 1,5-3D/PE-EX - 3024465
Accessories
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
Insertion bridge
Insertion bridge - EB 80- DIK BU - 2715940
Insertion bridge, pitch: 6.2 mm, number of positions: 80, color: blue
03/30/2021 Page 9 / 14
https://www.phoenixcontact.com/us/products/3024465
Sensor/actuator terminal block - VIOK 1,5-3D/PE-EX - 3024465
Accessories
Insertion bridge - EB 10- DIK RD - 2716774
Insertion bridge, pitch: 6.15 mm, number of positions: 10, color: red
Insertion bridge - EB 10- DIK BU - 2716680
Insertion bridge, pitch: 6.15 mm, number of positions: 10, color: blue
Insertion bridge - EB 80- DIK RD - 2715953
Insertion bridge, pitch: 6.2 mm, number of positions: 80, color: red
Insertion bridge - EB 10- DIK GY - 2715937
Insertion bridge, pitch: 6.15 mm, number of positions: 10, color: gray
Insertion bridge - EB 80- DIK WH - 2715788
Insertion bridge, pitch: 6.15 mm, number of positions: 80, color: white
Labeled terminal marker
03/30/2021 Page 10 / 14
https://www.phoenixcontact.com/us/products/3024465
Sensor/actuator terminal block - VIOK 1,5-3D/PE-EX - 3024465
Accessories
Marker card - SK 6,2/3,8:FORTL.ZAHLEN - 0804374
Marker card, Card, white, labeled, horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting
type: adhesive, for terminal block width: 6.2 mm, lettering field size: 6.2 x 3.8 mm
Zack marker strip - ZB 6 CUS - 0824992
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2
mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm,
lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15
x 10.5 mm, Number of individual labels: 10
03/30/2021 Page 11 / 14
https://www.phoenixcontact.com/us/products/3024465
Sensor/actuator terminal block - VIOK 1,5-3D/PE-EX - 3024465
Accessories
Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x
10.5 mm, Number of individual labels: 10
Marker for terminal blocks - ZB 6,LGS:U-N - 1051430
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W,
N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field
size: 6.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - UC-TM 6 CUS - 0824589
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual
labels: 80
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual
labels: 60
Screw bridge
Fixed bridge - FBI 100- 6 - 0201650
Fixed bridge, pitch: 6.2 mm, number of positions: 100, color: silver
03/30/2021 Page 12 / 14
https://www.phoenixcontact.com/us/products/3024465
Sensor/actuator terminal block - VIOK 1,5-3D/PE-EX - 3024465
Accessories
Fixed bridge - FBI 10- 6 - 0203250
Fixed bridge, pitch: 6.2 mm, number of positions: 10, color: silver
Fixed bridge - FBI 20- 6 - 0201867
Fixed bridge, pitch: 6.2 mm, number of positions: 20, color: silver
Terminal marking
Marker card - SBS 6:UNBEDRUCKT - 1007222
Marker card, Card, white, unlabeled, can be labeled with: Marker pen, mounting type: snap into tall marker groove, snap
into flat marker groove, for terminal block width: 6 mm, lettering field size: 6 x 6.1 mm, Number of individual labels: 250
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels:
10
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80
03/30/2021 Page 13 / 14
https://www.phoenixcontact.com/us/products/3024465
Sensor/actuator terminal block - VIOK 1,5-3D/PE-EX - 3024465
Accessories
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size:
5.6 x 10.5 mm, Number of individual labels: 60
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com
03/30/2021 Page 14 / 14
