3025406

https://www.phoenixcontact.com/us/products/3025406 Shield connection clamp - SK 5-D - 3025406 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Shield connection clamp, for direct shield on conductive mounting plates, metal thickness 1 ... 2 mm Your advantages  Easy handling  Spring-loaded, large-surface pressure plate  Suitable for direct and busbar mounting  Knurled screw  According to the requirements of the directive and standards for electrical equipment in potentially explosive areas, as components, shield connections are not eligible for certification. As such, shield connection clamps can be used in the Ex area even without appropriate approval and marking. Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4046356118170 Weight per Piece (excluding packing) 11.990 g Custom tariff number 85369010 Country of origin China Technical data General Number of levels 1 Number of connections 1 Cable diameter 2 mm ... 5 mm 06/28/2020   Page 1 / 6 https://www.phoenixcontact.com/us/products/3025406 Shield connection clamp - SK 5-D - 3025406 Technical data General Color silver Open side panel No Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 0.02 g²/Hz Acceleration 0,8 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Dimensions Length 19.5 mm Width 9 mm Height 46.8 mm Connection data Connection method Screw connection Screw thread M4 Tightening torque max 0.4 Nm Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 06/28/2020   Page 2 / 6 https://www.phoenixcontact.com/us/products/3025406 Shield connection clamp - SK 5-D - 3025406 Dimensional drawing Drilling diagram 06/28/2020   Page 3 / 6 https://www.phoenixcontact.com/us/products/3025406 Shield connection clamp - SK 5-D - 3025406 Dimensional drawing Punching template Classifications eCl@ss eCl@ss 10.0.1 27141150 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 06/28/2020   Page 4 / 6 https://www.phoenixcontact.com/us/products/3025406 Shield connection clamp - SK 5-D - 3025406 Classifications eCl@ss eCl@ss 6.0 27141100 eCl@ss 7.0 27141150 eCl@ss 8.0 27141150 eCl@ss 9.0 27141150 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC002020 ETIM 5.0 EC002020 ETIM 6.0 EC002020 ETIM 7.0 EC002020 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121432 UNSPSC 18.0 39121432 UNSPSC 19.0 39121432 UNSPSC 20.0 39121432 UNSPSC 21.0 39121432 Accessories Accessories Installation terminal block Connection terminal block - AKG 4 GNYE - 0421029 Connection terminal block, connection method: Screw connection, load current: 41 A, cross section: 0.5 mm² - 6 mm², width: 7 mm, color: green-yellow     06/28/2020   Page 5 / 6 https://www.phoenixcontact.com/us/products/3025406 Shield connection clamp - SK 5-D - 3025406 Accessories Connection terminal block - AKG 4 BK - 0421032 Connection terminal block, connection method: Screw connection, load current: 41 A, cross section: 0.5 mm² - 6 mm², width: 7 mm, color: black     Pick-off terminal block Connection terminal block - AK 4 - 0404017 Connection terminal block, connection method: Screw connection, load current: 41 A, cross section: 0.5 mm² - 6 mm², width: 7 mm, color: silver     Support Support bracket - AB-SK - 3025341 Support bracket for busbars     Support bracket - AB/SS - 0404428 Support bracket made from insulation material, with retaining screw, can be used with either 3 x 10 mm or 6 x 6 mm busbar, color: gray     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 06/28/2020   Page 6 / 6