3026214

https://www.phoenixcontact.com/us/products/3026214 Panel feed-through terminal block - HDFK 50-IB - 3026214 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Screw connection with tension sleeve, number of positions: 1, load current: 150 A, cross section: 16 mm² - 50 mm², connection direction of the conductor to plug-in direction: 0 °, width: 18.8 mm, color: gray Your advantages  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Tool-free snap-in principle enables easy mounting on the device panel  Automatic panel thickness compensation enables universal use Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4017918283056 Weight per Piece (excluding packing) 127.150 g Custom tariff number 85369010 Country of origin Greece Technical data Item properties Brief article description Panel feed-through terminal block Range of articles HDFK 50 Pitch 18.8 mm Number of positions 1 Connection method Screw connection with tension sleeve 06/13/2020   Page 1 / 9 https://www.phoenixcontact.com/us/products/3026214 Panel feed-through terminal block - HDFK 50-IB - 3026214 Technical data Item properties Number of connections 2 Number of potentials 1 Electrical parameters Nominal current 150 A Nom. voltage 690 V Rated voltage 690 V Rated surge voltage (III/3) 8 kV Connection capacity, external Connection method Screw connection with tension sleeve Connection direction of the conductor to plug-in direction 0° Conductor cross section solid 16 mm² ... 50 mm² Conductor cross section flexible 16 mm² ... 50 mm² Conductor cross section flexible, with ferrule without plastic sleeve 10 mm² ... 50 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve 10 mm² ... 50 mm² 2 conductors with same cross section, solid 6 mm² ... 16 mm² 2 conductors with same cross section, flexible 10 mm² ... 16 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 6 mm² ... 16 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 6 mm² ... 10 mm² Internal cylindrical gage B10 Stripping length 24 mm Torque 6 Nm ... 8 Nm Connection capacity, internal Connection method Screw connection with tension sleeve Connection direction of the conductor to plug-in direction 0° Conductor cross section solid 16 mm² ... 50 mm² Conductor cross section flexible 16 mm² ... 50 mm² Conductor cross section flexible, with ferrule without plastic sleeve 10 mm² ... 50 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve 10 mm² ... 50 mm² 2 conductors with same cross section, solid 6 mm² ... 16 mm² 2 conductors with same cross section, flexible 10 mm² ... 16 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 6 mm² ... 16 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 6 mm² ... 10 mm² Internal cylindrical gage B10 06/13/2020   Page 2 / 9 https://www.phoenixcontact.com/us/products/3026214 Panel feed-through terminal block - HDFK 50-IB - 3026214 Technical data Connection capacity, internal Stripping length 24 mm Torque 6 Nm ... 8 Nm Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics tin-plated Material data - housing Housing color gray (7042) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C Dimensions for the product Width [ w ] 18.8 mm Pitch 18.8 mm Packaging information Pieces per package 10 Denomination packing units Pcs. General product information Type of note Notes on safety Note The cable entry funnel is not touch-proof. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch proofness. Electrical tests Rated current 150 A Conductor cross section 50 mm² Air clearances and creepage distances Clearances and creepage distances Metal wall 1.0 mm ... 6.0 mm IEC 60947-7-1:2002-07 Application Metal wall 1.0 mm ... 6.0 mm Specification IEC 60947-7-1:2002-07 Minimum clearance - inhomogeneous field (III/3) 8 mm 06/13/2020   Page 3 / 9 https://www.phoenixcontact.com/us/products/3026214 Panel feed-through terminal block - HDFK 50-IB - 3026214 Technical data Air clearances and creepage distances Minimum creepage distance value (III/3) 8 mm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Safety note • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. • The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection.  There is no electrical contact to the housing. Ensure protective grounding is established for green-yellow color versions. Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 06/13/2020   Page 4 / 9 https://www.phoenixcontact.com/us/products/3026214 Panel feed-through terminal block - HDFK 50-IB - 3026214 Dimensional drawing Dimensional drawing 06/13/2020   Page 5 / 9 https://www.phoenixcontact.com/us/products/3026214 Panel feed-through terminal block - HDFK 50-IB - 3026214 Classifications eCl@ss eCl@ss 10.0.1 27141134 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141134 eCl@ss 8.0 27141134 eCl@ss 9.0 27141134 ETIM ETIM 2.0 EC001283 ETIM 3.0 EC001283 ETIM 4.0 EC001283 ETIM 5.0 EC001283 ETIM 6.0 EC001283 ETIM 7.0 EC001283 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals CSA / UL Recognized / KEMA-KEUR / IECEE CB Scheme / EAC Ex Approvals 06/13/2020   Page 6 / 9 https://www.phoenixcontact.com/us/products/3026214 Panel feed-through terminal block - HDFK 50-IB - 3026214 Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/   B C Nominal voltage UN 600 V 600 V Nominal current IN 125 A 125 A mm²/AWG/kcmil 6 6 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 170 A 170 A mm²/AWG/kcmil 6 6 KEMA-KEUR    http://www.dekra-certification.com     Nominal voltage UN 690 V Nominal current IN 150 A mm²/AWG/kcmil 50 IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 690 V Nominal current IN 150 A mm²/AWG/kcmil 50 EAC      13631  E60425-19890329  KEMA jetzt DEKRA  NL-29947  B.01687 06/13/2020   Page 7 / 9 https://www.phoenixcontact.com/us/products/3026214 Panel feed-through terminal block - HDFK 50-IB - 3026214 Accessories Accessories Labeled terminal marker Zack Marker strip, flat - ZBF 16 CUS - 0827465 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 5.15 x 16 mm, Number of individual labels: 5     Marker for terminal blocks - UC-TM 16 CUS - 0824621 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 10.5 mm, Number of individual labels: 32     Mounting material Insertion profile - UKH 50 EP - 3009228 Insertion profile, color: silver     Terminal marking Zack marker strip - ZB 16:UNPRINTED - 0827461 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 16 x 10.5 mm, Number of individual labels: 50     06/13/2020   Page 8 / 9 https://www.phoenixcontact.com/us/products/3026214 Panel feed-through terminal block - HDFK 50-IB - 3026214 Accessories Marker for terminal blocks - UC-TM 16 - 0819217 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 10.5 mm, Number of individual labels: 32     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 06/13/2020   Page 9 / 9