3026285

https://www.phoenixcontact.com/us/products/3026285 Test disconnect terminal block - UGSK 6 - 3026285 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Test disconnect terminal block, With slide, Connection method: Screw connection, Cross section: 0.5 mm² -10 mm² , AWG: 20 - 10, Width: 8.2 mm, Mounting type: NS 35/7,5, NS 35/15, NS 32, Color: gray Product Features  The URTK 6 test disconnect terminal block and the UGSK 6 slide-type terminal block were developed specifically for use in current transformer secondary circuits  Can be fitted on both sides with fixed and switchable bridges as well as test sockets with 4 mm diameter   Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 31.61 GRM Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 2 Color gray Insulating material PA Inflammability class according to UL 94 V0 Rated surge voltage 6 kV Pollution degree 3 Surge voltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Maximum load current (lower level) 57 A Additional text with 10 mm² conductor cross section 11/03/2014   Page 1 / 8 https://www.phoenixcontact.com/us/products/3026285 Test disconnect terminal block - UGSK 6 - 3026285 Technical data General Nominal current IN (lower level) 41 A Nominal voltage UN 400 V Open side panel ja Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Surge voltage test setpoint 7.3 kV Result of surge voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of power-frequency withstand voltage test Test passed Checking the mechanical stability of terminal points (5 x conductor connection) Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.5 mm² / 0.3 kg 2 6 mm / 1.4 kg 10 mm² / 2 kg Result of bending test Test passed Conductor cross section tensile test 0.5 mm² Tractive force setpoint 40 N Conductor cross section tensile test 6 mm² Tractive force setpoint 160 N Conductor cross section tensile test 10 mm² Tractive force setpoint 180 N Tensile test result Test passed Requirements, voltage drop U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1 Result of voltage drop test Test passed Temperature-rise test Test passed Dimensions Length 91 mm Width 8.2 mm Height NS 35/7,5 51 mm Height NS 35/15 58.5 mm Height NS 32 56 mm Connection data Conductor cross section solid min. 0.5 mm² 11/03/2014   Page 2 / 8 https://www.phoenixcontact.com/us/products/3026285 Test disconnect terminal block - UGSK 6 - 3026285 Technical data Connection data Conductor cross section solid max. 10 mm² Conductor cross section stranded min. 0.5 mm² Conductor cross section stranded max. 6 mm² Conductor cross section AWG/kcmil min. 20 Conductor cross section AWG/kcmil max 8 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.5 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 6 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.5 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 6 mm² 2 conductors with same cross section, solid min. 0.5 mm² 2 conductors with same cross section, solid max. 2.5 mm² 2 conductors with same cross section, stranded min. 0.5 mm² 2 conductors with same cross section, stranded max. 4 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 2.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 4 mm² sleeve, max. Connection method Screw connection Stripping length 10 mm Screw thread M4 Tightening torque, min 1.2 Nm Tightening torque max 1.4 Nm Disconnect element M3 0.6 Nm 0.8 Nm Classifications eCl@ss eCl@ss 4.0 27141126 eCl@ss 4.1 27141126 eCl@ss 5.0 27141127 eCl@ss 5.1 27141127 eCl@ss 6.0 27141127 eCl@ss 7.0 27141127 eCl@ss 8.0 27141126 11/03/2014   Page 3 / 8 https://www.phoenixcontact.com/us/products/3026285 Test disconnect terminal block - UGSK 6 - 3026285 Classifications ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 5.0 EC000902 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / GOST / PRS / GOST / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-8 Nominal current IN 50 A Nominal voltage UN 300 V 11/03/2014   Page 4 / 8 https://www.phoenixcontact.com/us/products/3026285 Test disconnect terminal block - UGSK 6 - 3026285 Approvals cUL Recognized      mm²/AWG/kcmil 26-8 Nominal current IN 50 A Nominal voltage UN 300 V GOST  PRS  GOST  cULus Recognized  Drawings 11/03/2014   Page 5 / 8 https://www.phoenixcontact.com/us/products/3026285 Test disconnect terminal block - UGSK 6 - 3026285 Circuit diagram Schematic diagram Three-phase linked transducer test set 11/03/2014   Page 6 / 8 https://www.phoenixcontact.com/us/products/3026285 Test disconnect terminal block - UGSK 6 - 3026285 Schematic diagram Three-phase transducer test set 11/03/2014   Page 7 / 8 https://www.phoenixcontact.com/us/products/3026285 Test disconnect terminal block - UGSK 6 - 3026285 Circuit diagram a = open 1 = cover 2 = fixed bridge 3 = switch bar 4 = switching lock 5 = test plug socket 6 = short-circuit plug Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 11/03/2014   Page 8 / 8