https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Fuse modular terminal block, fuse type: Glass / ceramics / ..., connection method: Screw connection, cross
section: 0.2 mm²- 4 mm², AWG: 24 - 12, nominal current: 32 A, nom. voltage: 24 V, width: 8.2 mm, fuse type: G /
5 x 20, mounting type: NS 35/7,5, NS 35/15, NS 32, color: black
Your advantages
Versions with LED
Compact double-level fuse terminal block
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4017918164188
Weight per Piece (excluding packing)
35.770 g
Custom tariff number
85369095
Country of origin
Poland
Technical data
General
Note
For terminal marking, please use marking material with 8.2 mm pitch.
For lever marking, please use flat marking material with 8.2 mm pitch.
Number of levels
2
Number of connections
4
Nominal cross section
4 mm²
Color
black
Insulating material
PA
Flammability rating according to UL 94
V0
09/09/2019 Page 1 / 15
https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Technical data
General
Maximum power dissipation for nominal condition
4 W (the value is multiplied when connecting multiple levels)
Fuse
G / 5 x 20
Fuse type
Glass / ceramics / ...
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation
max. 1.6 W (with single arrangement of the fuse terminal block in the event
of overload)
max. 1.6 W (With interconnected arrangement of several fuse terminal
blocks in the event of overload)
max. 4 W (with single arrangement of the fuse terminal block in the event
of a short-circuit)
max. 2.5 W (With interconnected arrangement of several fuse terminal
blocks in the event of a short-circuit)
LED voltage range
15 V AC/DC ... 30 V AC/DC
LED current range
1 mA ... 2.4 mA
Connection in acc. with standard
IEC 60947-7-3
Maximum load current
32 A
Nominal current IN
32 A
Nominal voltage UN
24 V
Maximum load current (upper level)
10 A
Nominal current IN (upper level)
10 A
Nominal voltage UN
400 V
Open side panel
No
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
09/09/2019 Page 2 / 15
https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Technical data
General
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
8.2 mm
Length
86.5 mm
Height NS 35/7,5
79 mm
Height NS 35/15
86.5 mm
Height NS 32
84 mm
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
1.5 mm²
sleeve, max.
Connection method
Screw connection
Stripping length
8 mm
Internal cylindrical gage
A4
Screw thread
M3
Tightening torque, min
0.5 Nm
Tightening torque max
0.8 Nm
Standards and Regulations
09/09/2019 Page 3 / 15
https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Technical data
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-3
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Circuit diagram
09/09/2019 Page 4 / 15
https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Classifications
eCl@ss
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141116
eCl@ss 8.0
27141116
eCl@ss 9.0
27141116
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000899
ETIM 4.0
EC000899
ETIM 5.0
EC000899
ETIM 6.0
EC000899
ETIM 7.0
EC000899
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Accessories
Accessories
DIN rail
DIN rail perforated - NS 32 PERF 2000MM - 1201002
DIN rail perforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, length: 2000 mm, color: silver
09/09/2019 Page 5 / 15
https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Accessories
DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015
DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
09/09/2019 Page 6 / 15
https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Accessories
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
09/09/2019 Page 7 / 15
https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Accessories
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
09/09/2019 Page 8 / 15
https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Accessories
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
09/09/2019 Page 9 / 15
https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Accessories
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
Insertion bridge
09/09/2019 Page 10 / 15
https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Accessories
Insertion bridge - EBS 2- 8 - 3118151
Insertion bridge, pitch: 8 mm, number of positions: 2, color: gray
Insertion bridge - EBS 3- 8 - 3118148
Insertion bridge, pitch: 8 mm, number of positions: 3, color: gray
Insertion bridge - EBS 10- 8 - 3118135
Insertion bridge, pitch: 8 mm, number of positions: 10, color: gray
Labeled terminal marker
Zack marker strip - ZB 8 CUS - 0825011
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10
Marker for terminal blocks - UC-TM 8 CUS - 0824597
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual
labels: 56
09/09/2019 Page 11 / 15
https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Accessories
Marker for terminal blocks - UCT-TM 8 CUS - 0829616
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual
labels: 42
Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 8.2
mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10
Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm,
lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10
Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x
8.15 mm, Number of individual labels: 10
Zack Marker strip, flat - ZBF 8 CUS - 0825030
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm, Number of individual labels:
10
09/09/2019 Page 12 / 15
https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Accessories
Zack Marker strip, flat - ZBF 8,LGS:FORTL.ZAHLEN - 0808804
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 101 ...
110, mounting type: snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm,
Number of individual labels: 10
Marker for terminal blocks - UC-TMF 8 CUS - 0824654
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 5.1 mm, Number of individual
labels: 56
Marker for terminal blocks - UCT-TMF 8 CUS - 0829672
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.4 x 4.7 mm, Number of individual
labels: 42
Screw bridge
Fixed bridge - FBRI 10-8 N - 2772080
Fixed bridge, pitch: 8.2 mm, number of positions: 10, color: silver
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
09/09/2019 Page 13 / 15
https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Accessories
Terminal marking
Zack marker strip - ZB 8:UNBEDRUCKT - 1052002
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels:
10
Marker for terminal blocks - UC-TM 8 - 0818072
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 56
Marker for terminal blocks - UCT-TM 8 - 0828740
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size:
7.6 x 10.5 mm, Number of individual labels: 42
Zack Marker strip, flat - ZBF 8:UNBEDRUCKT - 0808781
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm, Number of individual
labels: 10
Marker for terminal blocks - UC-TMF 8 - 0818137
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 8.2 mm, lettering field size: 7.6 x 5.1 mm, Number of individual labels: 56
09/09/2019 Page 14 / 15
https://www.phoenixcontact.com/us/products/3026654
Fuse modular terminal block - UKK 5-HESILED 24 (5X20) - 3026654
Accessories
Marker for terminal blocks - UCT-TMF 8 - 0828748
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size:
7.4 x 4.7 mm, Number of individual labels: 42
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
09/09/2019 Page 15 / 15
