https://www.phoenixcontact.com/us/products/3030103
Feed-through terminal block - ATEX-MT 1,5 BU - 3030103
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, nom. voltage: 400 V, nominal current: 17.5 A, connection method: Screw
connection, number of connections: 2, cross section: 0.14 mm² - 1.5 mm², AWG: 26 - 16, width: 4.2 mm, color:
blue, mounting type: NS 15
The figure shows MT 1,5 BU
Your advantages
Nominal cross section of 1.5 mm²
Space saving thanks to compact design and mounting option on a 15 mm DIN rail
Clear arrangement thanks to marking of all terminal points
Easy potential distribution thanks to standardized screw bridges in the terminal center
Snap-on foot for NS 15 DIN rails
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4017918435561
Weight per Piece (excluding packing)
2.400 g
Custom tariff number
85369010
Country of origin
Turkey
Technical data
General
Number of levels
1
Number of connections
2
Potentials
1
08/29/2019 Page 1 / 10
https://www.phoenixcontact.com/us/products/3030103
Feed-through terminal block - ATEX-MT 1,5 BU - 3030103
Technical data
General
Nominal cross section
1.5 mm²
Color
blue
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
4 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
0.56 W
Designation
Level 1 above 1 below 1
Maximum load current
17.5 A (with 1.5 mm² conductor cross section)
Nominal current IN
17.5 A
Nominal voltage UN
400 V
Open side panel
Yes
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
4.2 mm
End cover width
1 mm
Length
22 mm
Height NS 15
23.5 mm
Connection data
08/29/2019 Page 2 / 10
https://www.phoenixcontact.com/us/products/3030103
Feed-through terminal block - ATEX-MT 1,5 BU - 3030103
Technical data
Connection data
Connection
1 level
Connection method
Screw connection
Screw thread
M2
Stripping length
6 mm
Tightening torque, min
0.22 Nm
Tightening torque max
0.25 Nm
Connection in acc. with standard
IEC/EN 60079-7
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
16
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
1.5 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
16
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
0.75 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
0.75 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, solid max.
0.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
2 conductors with same cross section, stranded max.
0.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
0.34 mm²
Internal cylindrical gage
A1
Standards and Regulations
Connection in acc. with standard
IEC/EN 60079-7
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Environmental Product Compliance
Lead 7439-92-1
08/29/2019 Page 3 / 10
https://www.phoenixcontact.com/us/products/3030103
Feed-through terminal block - ATEX-MT 1,5 BU - 3030103
Technical data
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Classifications
eCl@ss
eCl@ss 4.1
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
EAC
Ex Approvals
ATEX / EAC Ex
08/29/2019 Page 4 / 10
https://www.phoenixcontact.com/us/products/3030103
Feed-through terminal block - ATEX-MT 1,5 BU - 3030103
Approvals
Approval details
EAC
EAC-Zulassung
Accessories
Accessories
DIN rail
DIN rail, unperforated - NS 15 UNPERF 2000MM - 1401695
DIN rail, unperforated, Standard profile, width: 15 mm, height: 5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 15 PERF 2000MM - 1401682
DIN rail perforated, Standard profile, width: 15 mm, height: 5.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 15 AL PERF 2000MM - 1401763
DIN rail perforated, Standard profile, width: 15 mm, height: 5.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 15 WH PERF 2000MM - 1204096
DIN rail perforated, Standard profile, width: 15 mm, height: 5.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
08/29/2019 Page 5 / 10
https://www.phoenixcontact.com/us/products/3030103
Feed-through terminal block - ATEX-MT 1,5 BU - 3030103
Accessories
End block
End clamp - E/MBK - 1401637
End clamp, width: 6.2 mm, color: gray
End clamp - E/MK - 1421633
End clamp, width: 6.2 mm, color: gray
End clamp - E/MK 1 - 1421659
End clamp width: 6 mm, color: gray
End cover
End cover - D-MT 1,5 - 3100321
End cover, length: 22 mm, width: 1 mm, height: 17.7 mm, color: gray
Labeled terminal marker
08/29/2019 Page 6 / 10
https://www.phoenixcontact.com/us/products/3030103
Feed-through terminal block - ATEX-MT 1,5 BU - 3030103
Accessories
Zack Marker strip, flat - ZBF 4 CUS - 0825023
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 5.2 mm
Zack Marker strip, flat - ZBF 4,LGS:FORTL.ZAHLEN - 0808626
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm
Zack Marker strip, flat - ZBF 4,QR:FORTL.ZAHLEN - 0808820
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm
Zack Marker strip, flat - ZBF 4,LGS:GERADE ZAHLEN - 0810818
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ...
100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 5.15 x 4.15 mm
Zack Marker strip, flat - ZBF 4,LGS:UNGERADE ZAHLEN - 0810850
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99,
mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 5.15 x 4.15 mm
08/29/2019 Page 7 / 10
https://www.phoenixcontact.com/us/products/3030103
Feed-through terminal block - ATEX-MT 1,5 BU - 3030103
Accessories
Marker for terminal blocks - UC-TMF 4 CUS - 0824630
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 4 CUS - 0829651
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 3.4 x 4.7 mm
Screw bridge
Fixed bridge - FBRN 4-4 N - 3001569
Fixed bridge, pitch: 4 mm, number of positions: 4, color: silver
Fixed bridge - FBRN 5-4 N - 3001572
Fixed bridge, number of positions: 5, color: silver
Fixed bridge - FBRN 6-4 N - 3001585
Fixed bridge, number of positions: 6, color: silver
08/29/2019 Page 8 / 10
https://www.phoenixcontact.com/us/products/3030103
Feed-through terminal block - ATEX-MT 1,5 BU - 3030103
Accessories
Fixed bridge - FBRN 7-4 N - 3001598
Fixed bridge, number of positions: 7, color: silver
Fixed bridge - FBRN 8-4 N - 3001608
Fixed bridge, pitch: 4 mm, number of positions: 8, color: silver
Fixed bridge - FBRN 10-4 N - 3001624
Fixed bridge, pitch: 4.2 mm, number of positions: 10, color: silver
Fixed bridge - FBRN 20-4 N - 3001637
Fixed bridge, number of positions: 20, color: silver
Screwdriver tools
Screwdriver - SZS 0,4X2,5 VDE - 1205037
Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip
08/29/2019 Page 9 / 10
https://www.phoenixcontact.com/us/products/3030103
Feed-through terminal block - ATEX-MT 1,5 BU - 3030103
Accessories
Terminal marking
Zack Marker strip, flat - ZBF 4:UNBEDRUCKT - 0808587
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm
Marker for terminal blocks - UC-TMF 4 - 0818166
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 4.2 mm, lettering field size: 3.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 4 - 0828742
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size:
3.4 x 4.7 mm
Test socket
Test adapter - PAI-4 - 3030925
Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm ... 8.2 mm pitch, color: gray
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
08/29/2019 Page 10 / 10
