https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, Connection method: Spring-cage connection, Cross section: 0.08 mm² - 6 mm²,
AWG: 28 - 10, Width: 6.2 mm, Color: violet, Mounting type: NS 35/7,5, NS 35/15
The illustration shows version ST 4
in gray
Why buy this product
The large wiring space enables the use of conductors with ferrules and plastic collars within the nominal cross section
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
50 STK
Weight per Piece (excluding packing)
8.800 g
Custom tariff number
85369010
Country of origin
Germany
Technical data
Environmental Product Compliance
China RoHS
No hazardous substances above threshold values
General
Number of levels
1
Number of connections
2
Potentials
1
Nominal cross section
4 mm²
Color
violet
Insulating material
PA
Flammability rating according to UL 94
V0
09/08/2016 Page 1 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Technical data
General
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum load current
40 A (with 6 mm² conductor cross section)
Nominal current IN
32 A
Nominal voltage UN
800 V
Open side panel
Yes
Dimensions
Width
6.2 mm
End cover width
2.2 mm
Length
56 mm
Height NS 35/7,5
36.5 mm
Height NS 35/15
44 mm
Connection data
Connection method
Spring-cage connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.08 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
28
Conductor cross section AWG max.
10
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible max.
4 mm²
Min. AWG conductor cross section, flexible
28
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
1 mm²
sleeve, max.
Connection in acc. with standard
IEC/EN 60079-7
Conductor cross section solid min.
0.08 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
28
09/08/2016 Page 2 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Technical data
Connection data
Conductor cross section AWG max.
10
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible max.
4 mm²
Stripping length
8 mm ... 10 mm
Internal cylindrical gage
A4
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
Flammability rating according to UL 94
V0
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141117
eCl@ss 4.1
27141117
eCl@ss 5.0
27141120
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
09/08/2016 Page 3 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Classifications
UNSPSC
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / cUL Recognized / LR / GL / BV / RS / ABS / KR / NK / EAC / DNV GL / cULus Recognized
Ex Approvals
IECEx / ATEX / EAC Ex
Approval details
CSA
http://www.csagroup.org/us/en/services/testing-and-certification/certified-product-listing 13631
B
C
mm²/AWG/kcmil
28-10
28-10
Nominal current IN
30 A
30 A
Nominal voltage UN
600 V
600 V
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B
C
mm²/AWG/kcmil
28-10
28-10
Nominal current IN
30 A
30 A
Nominal voltage UN
600 V
600 V
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B
C
mm²/AWG/kcmil
28-10
28-10
Nominal current IN
30 A
30 A
Nominal voltage UN
600 V
600 V
09/08/2016 Page 4 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Approvals
LR http://www.lr.org/en 04/20034
GL http://www.gl-group.com/newbuilding/approvals/index.html 40756-01 HH
BV http://www.veristar.com/wps/portal/!ut/p/_s.7_0_A/7_0_RIM 13403/B0 BV
RS http://www.rs-head.spb.ru/en/index.php 11.04057.250
ABS http://www.eagle.org/eagleExternalPortalWEB/ 01-HS224709-PDA
KR http://www.krs.co.kr/eng/index.html HMB17372-EL002
NK http://www.classnk.or.jp/hp/en 09 ME 140
EAC EAC-Zulassung
DNV GL https://www.dnvgl.com/ E-13345 (E-9232)
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
09/08/2016 Page 5 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
09/08/2016 Page 6 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
09/08/2016 Page 7 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
09/08/2016 Page 8 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
Documentation
Mounting material - ST-IL - 3039900
Operating decal for the ST terminal block
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
09/08/2016 Page 9 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.5 mm, Color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-ST 4 - 3030420
End cover, Length: 55.9 mm, Width: 2.2 mm, Height: 29 mm, Color: gray
09/08/2016 Page 10 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, Color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, Color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, Color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, Color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, Color: green
09/08/2016 Page 11 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, Color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, Color: black
Insulating sleeve - ISH 4/0,5 - 3002885
Insulating sleeve, Color: gray
Insulating sleeve - ISH 4/1,0 - 3002898
Insulating sleeve, Color: black
Jumper
Plug-in bridge - FBS 2-6 - 3030336
Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 10.7 mm, Number of positions: 2, Color: red
09/08/2016 Page 12 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
Plug-in bridge - FBS 3-6 - 3030242
Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 16.9 mm, Number of positions: 3, Color: red
Plug-in bridge - FBS 4-6 - 3030255
Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 23.1 mm, Number of positions: 4, Color: red
Plug-in bridge - FBS 5-6 - 3030349
Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 29.3 mm, Number of positions: 5, Color: red
Plug-in bridge - FBS 10-6 - 3030271
Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 60.3 mm, Number of positions: 10, Color: red
Plug-in bridge - FBS 20-6 - 3030365
Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 122.3 mm, Number of positions: 20, Color: red
09/08/2016 Page 13 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
Plug-in bridge - FBSR 2-6 - 3033715
Plug-in bridge, Pitch: 6.2 mm, Number of positions: 2, Color: red
Plug-in bridge - FBSR 10-6 - 3033716
Plug-in bridge, Pitch: 6.2 mm, Number of positions: 10, Color: red
Plug-in bridge - FBSR 2-6 - 3033715
Plug-in bridge, Pitch: 6.2 mm, Number of positions: 2, Color: red
Plug-in bridge - FBSR 3-6 - 3001594
Plug-in bridge, Pitch: 6.2 mm, Number of positions: 3, Color: red
Plug-in bridge - FBSR 4-6 - 3001595
Plug-in bridge, Pitch: 6.2 mm, Number of positions: 4, Color: red
09/08/2016 Page 14 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
Plug-in bridge - FBSR 5-6 - 3001596
Plug-in bridge, Pitch: 6.2 mm, Number of positions: 5, Color: red
Plug-in bridge - FBSR 10-6 - 3033716
Plug-in bridge, Pitch: 6.2 mm, Number of positions: 10, Color: red
Labeled terminal marker
Warning cover - WST 4 - 3030954
Warning cover, Strip, yellow, labeled, Mounting type: Plug in, Lettering field: 4.5 x 5.55 mm
Zack marker strip - ZB 6 CUS - 0824992
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into
tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11
- 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field:
6.15 x 10.5 mm
09/08/2016 Page 15 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10, 11
- 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field:
6.15 x 10.5 mm
Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Identical numbers 1 or 2, etc. up
to 100, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414
Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N,
PE, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks - ZB 6,LGS:U-N - 1051430
Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: U, V, W, N, GND, U, V,
W, N, GND, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks - UC-TM 6 CUS - 0824589
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
09/08/2016 Page 16 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Zack Marker strip, flat - ZBF 6 CUS - 0825027
Zack Marker strip, flat, Strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type:
Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm
Marker for terminal blocks - UC-TMF 6 CUS - 0824646
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 6 CUS - 0829665
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.4 x 4.7 mm
Zack Marker strip, flat - ZBF 6,LGS:FORTL.ZAHLEN - 0808749
Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100,
Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm
09/08/2016 Page 17 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
Zack Marker strip, flat - ZBF 6,QR:FORTL.ZAHLEN - 0808765
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100,
Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm
Zack Marker strip, flat - ZBF 6,LGS:GERADE ZAHLEN - 0810834
Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Consecutive numbers 2 - 20, 22 - 40, etc. up to 82 - 100,
Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm
Zack Marker strip, flat - ZBF 6,LGS:UNGERADE ZAHLEN - 0810876
Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99,
Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm
Partition plate
Partition plate - ATP-ST 4 - 3030721
Partition plate, Length: 59.8 mm, Width: 2 mm, Height: 39 mm, Color: gray
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
09/08/2016 Page 18 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
Screwdriver - ST-BW - 1207608
Actuation tool, for all 2.5 mm² - 4.0 mm² spring-cages
Terminal marking
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal
block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Zack Marker strip, flat - ZBF 6:UNBEDRUCKT - 0808710
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat marker groove,
for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm
09/08/2016 Page 19 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
Marker for terminal blocks - UC-TMF 6 - 0818140
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 6 - 0828746
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into flat marker groove, for terminal
block width: 6.2 mm, Lettering field: 5.4 x 4.7 mm
Test plug terminal block
Reducing plug - RPS - 0201647
Reducing plug, Color: gray
Test plugs - MPS-MT - 0201744
Test plugs, Color: silver
Test plugs - PS-6 - 3030996
Test plugs, Color: red
09/08/2016 Page 20 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
Test plugs - PS-6/2,3MM RD - 3038736
Test plugs, Color: red
Test socket
Test adapter - PAI-4-FIX-5/6 BU - 3035975
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 OG - 3035974
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 YE - 3035977
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 RD - 3035976
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
09/08/2016 Page 21 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
Test adapter - PAI-4-FIX-5/6 GN - 3035978
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 BK - 3035980
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 GY - 3035982
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 VT - 3035979
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 BN - 3035981
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
09/08/2016 Page 22 / 23
https://www.phoenixcontact.com/us/products/3031365
Feed-through terminal block - ST 4 VT - 3031365
Accessories
Test adapter - PAI-4-FIX-5/6 WH - 3035983
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
09/08/2016 Page 23 / 23
