3031940

Spring Cage Installation Terminal Blocks STI 2,5 and STI 4 co s. nt on l in ec om po ne Assembly In order to achieve a reliable contact between the disconnect slide and the neutral busbar, the AB-STI supports must be mounted at the beginning and end of each terminal strip or, in the case of longer terminal strips, approx. every 20 cm. m The asymmetrically arranged terminal foot makes the STI series stand out against standard terminal blocks. This foot makes it possible to route the neutral busbar past the terminal strip and to fix it in the insulated supports. The neutral busbar makes contact via the screwless neutral-disconnect slide by simple levering with a screwdriver. Considerable space savings in the control cabinet can be made by using the "mini-spring" spring cage system, without having to give up the familiar high quality features such as the generous labeling option, maximum connection space and the flexible plug-in bridge system. Headquarters: © Phoenix Contact GmbH & Co. • Flachsmarktstraße 8 • 32825 Blomberg • Germany Phone +49-(0) 52 35-3-00 • Fax +49-(0) 52 35-3-4 12 0 • http://www.phoenixcontact.com Spring Cage Installation Terminal Block STI 2,5 AWG I [A] U [V] 0.2-4 0.2-2.5 24-12 32 400 Technical data Spring cage installation terminal block, for mounting on 3 gray blue (1) End cover terminal width 5.2 terminal width 5.2 gray (2) Insulating stop sleeve, prevents unintentional clamping of insulation in the case of smaller cross sections white Cross section range: 0.2 mm2 0.25-0.5 mm2 gray 2 black 0.75-1 mm 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. (8) Zack marker sheet, flat, 120-section, for labeling the outer marker grooves in ec (9) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges STI 2,5 STI 2,5 BU 30 31 92 4 31 36 21 7 50 50 D-STI 2,5 30 30 56 9 50 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 30 30 16 1 3/0 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 10 10 10 10 10 10 PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 RPS 02 01 64 7 10 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBFM 5 /WH:UNPRINTED 08 03 59 5 10 ZB 5: UNPRINTED 10 50 00 4 10 ne white white on l Dimensions Width / length /end cover width [mm] Height (NS 35:7.5 / NS 35:15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class in accordance with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A po om (7) Screwdriver, for actuating the tension spring Pcs. Pkt. FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 (4) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connector, making contact in the bridge shaft (5) 2.3 mm ∅ test connector 1), consisting of metal part and red insulating sleeve (6) Reducing plug Order No. nt (3) Plug-in bridge, for cross connections in the terminal center Type m flexible stranded co IEC 60 947-7-1 rigid solid s. (IEC) [mm2] ) Further colors are available on request. PHOENIX CONTACT page 2 of 7 5.2 / 59.5 / 2.2 43 / 50.5 32 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 – – Spring Cage Ground Terminal Block STI 2,5-PE (IEC) [mm2] rigid solid flexible stranded AWG IEC 60 947-7-2 0.2-4 0.2-2.5 24-12 The current carrying capacity of the mounting rails should be observed. Spring cage ground terminal block, for mounting on 3 green-yellow (1) End cover terminal width 5.2 gray Type Order No. Pcs. Pkt. STI 2,5-PE 30 31 93 7 50 D-STI 2,5 30 30 56 9 50 m Technical data ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 (3) Screwdriver, for actuating the tension spring SZF 1 - 0,6 x 3,5 s. white nt white ZBFM 5 /WH:UNPRINTED ne (4) Zack marker sheet, flat, 120-section, for labeling the outer marker grooves (5) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges co (2) Insulating stop sleeve, prevents unintentional clamping of insulation in the case of smaller cross sections white Cross section range: 0.2 mm2 0.25-0.5 mm2 gray 2 black 0.75-1 mm ZB 5: UNPRINTED on l in ec om po Dimensions Width / length /end cover width [mm] Height (NS 35:7.5 / NS 35:15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class in accordance with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG PHOENIX CONTACT page 3 of 7 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 12 04 51 7 10 08 03 59 5 10 10 50 00 4 10 5.2 / 59.5 / 2.2 43 / 50.5 – 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 – – Spring Cage Installation Terminal Block STN 2,5 (IEC) [mm2] IEC 60 947-7-1 rigid solid flexible stranded AWG I [A] U [V] 0.2-4 0.2-2.5 24-12 32 400 Technical data Order No. Pcs. Pkt. Spring cage neutral disconnect terminal block, for mounting on 3 blue terminal width 5.2 STN 2,5 30 31 94 0 50 (1) End cover D-STI 2,5 30 30 56 9 50 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. (8) Support, blue insulating material, for mounting the neutral busbar in ec (9) Screwdriver, for actuating the tension spring (10) Zack marker sheet, flat, 120-section, for labeling the outer marker grooves on l (11) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges 50 50 50 30 30 16 1 3/0 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 10 10 10 10 10 10 PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 RPS 02 01 64 7 10 NLS-CU 3/10 04 02 17 4 10 AB-STI 30 30 82 8 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBFM 5 /WH:UNPRINTED 08 03 59 5 10 ZB 5: UNPRINTED 10 50 00 4 10 ne white white Dimensions Width / length /end cover width [mm] Height (NS 35:7.5 / NS 35:15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section [A] / [mm2] Current carrying capacity of the neutal busbar [A] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class in accordance with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A po om (7) Neutral busbar, 3 x 10 mm, 1 m long, copper, tin-plated 30 02 84 3 30 02 85 6 30 02 86 9 FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 (4) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connector, making contact in the bridge shaft (5) 2.3 mm ∅ test connector 1), consisting of metal part and red insulating sleeve (6) Reducing plug ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 nt (3) Plug-in bridge, for cross connections in the terminal center co (2) Insulating stop sleeve, prevents unintentional clamping of insulation in the case of smaller cross sections white Cross section range: 0.2 mm2 0.25-0.5 mm2 gray 2 black 0.75-1 mm s. gray m Type ) Further colors are available on request. PHOENIX CONTACT page 4 of 7 5.2 / 59.5 / 2.2 43 / 50.5 32 / 4 140 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 – – Spring Cage Installation Terminal Block STI 4 I [A] U [V] 0.5-6 0.5-4 20-10 41 400 Technical data Spring cage installation terminal block, for mounting on 3 gray blue (1) End cover terminal width 6.2 terminal width 6.2 gray (2) Insulating stop sleeve, prevents unintentional clamping of insulation in the case of smaller cross sections gray Cross section range: 0.25-0.5 mm2 0.75-1 mm2 black (3) Plug-in bridge, for cross connections in the terminal center 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. (8) Zack marker sheet, flat, 100-section, for labeling the outer marker grooves STI 4 STI 4 BU 30 31 95 3 31 36 22 0 50 50 D-STI 4 30 30 64 0 50 ISH 4/0,5 ISH 4/1 30 02 88 5 30 02 89 8 50 50 30 30 33 6 30 30 24 2 30 30 25 5 30 30 34 9 30 30 27 1 30 30 36 5 10 10 10 10 10 10 30 30 92 5 10 02 01 55 3 10 RPS 02 01 64 7 10 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBFM 6 /WH:UNPRINTED 08 03 61 8 10 ZB 6:UNPRINTED 10 51 00 3 10 ne po white on l Dimensions Width / length /end cover width [mm] Height (NS 35:7.5 / NS 35:15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class in accordance with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 Imax.: 32 A 32 A 32 A 32 A 32 A 32 A MPS-RD white in ec (9) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges Pcs. Pkt. PAI 4 om (7) Screwdriver, for actuating the tension spring Order No. FBS 2-6 FBS 3-6 FBS 4-6 FBS 5-6 FBS 10-6 FBS 20-6 (4) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connector, making contact in the bridge shaft (5) 2.3 mm ∅ test connector 1), consisting of metal part and red insulating sleeve (6) Reducing plug Type m AWG co flexible stranded s. IEC 60 947-7-1 rigid solid nt (IEC) [mm2] ) Further colors are available on request. PHOENIX CONTACT page 5 of 7 6.2 / 66 / 2.2 43 / 50.5 41 / 6 6/3 III / I 0.5 - 4 0.5 - 4 0.5 - 1 10 A4 PA V0 – – Spring Cage Ground Terminal Block STI 4-PE (IEC) [mm2] rigid solid flexible stranded AWG IEC 60 947-7-2 0.5-6 0.5-4 20-10 The current carrying capacity of the mounting rails should be observed. (1) End cover terminal width 6.2 gray Order No. Pcs. Pkt. STI 4-PE 30 31 96 6 50 D-STI 4 30 30 64 0 50 m Spring cage ground terminal block, green-yellow for mounting on 3 Type ISH 4/0,5 ISH 4/1 (3) Screwdriver, for actuating the tension spring SZF 1 - 0,6 x 3,5 white nt (5) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges white ZBFM 6 /WH:UNPRINTED ne (4) Zack marker sheet, flat, 100-section, for labeling the outer marker grooves s. (2) Insulating stop sleeve, prevents unintentional clamping of insulation in the case of smaller cross sections gray Cross section range: 0.25-0.5 mm2 black 0.75-1 mm2 co Technical data ZB 6:UNPRINTED on l in ec om po Dimensions Width / length /end cover width [mm] Height (NS 35:7.5 / NS 35:15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class in accordance with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG PHOENIX CONTACT page 6 of 7 30 02 88 5 30 02 89 8 50 50 12 04 51 7 10 08 03 61 8 10 10 51 00 3 10 6.2 / 66 / 2.2 43 / 50.5 – 6/3 III / I 0.5 - 4 0.5 - 4 0.5 - 1 10 A4 PA V0 – – Spring Cage Installation Terminal Block (IEC) [mm2] IEC 60 947-7-1 rigid solid flexible stranded AWG I [A] U [V] 0.5-6 0.5-4 20-10 36 250 Technical data Order No. Pcs. Pkt. Spring cage neutral disconnect terminal block, blue terminal width 6.2 for mounting on 3 STN 4 30 31 97 9 50 (1) End cover D-STI 4 30 30 64 0 50 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. (8) Support, blue insulating material, for mounting the neutral busbar in ec (9) Screwdriver, for actuating the tension spring (10) Zack marker sheet, flat, 100-section, for labeling the outer marker grooves 30 30 33 6 30 30 24 2 30 30 25 5 30 30 34 9 30 30 27 1 30 30 36 5 10 10 10 10 10 10 30 30 92 5 10 02 01 55 3 10 RPS 02 01 64 7 10 NLS-CU 3/10 04 02 17 4 10 AB-STI 30 30 82 8 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBFM 6 /WH:UNPRINTED 08 03 61 8 10 ZB 6:UNPRINTED 10 51 00 3 10 ne po white white Dimensions Width / length /end cover width [mm] Height (NS 35:7.5 / NS 35:15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section [A] / [mm2] Current carrying capacity of the neutral busbar [A] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class in accordance with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 Imax.: 32 A 32 A 32 A 32 A 32 A 32 A MPS-RD on l (11) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges 50 50 PAI 4 om (7) Neutral busbar, 3 x 10 mm, 1 m long, copper, tin-plated 30 02 88 5 30 02 89 8 FBS 2-6 FBS 3-6 FBS 4-6 FBS 5-6 FBS 10-6 FBS 20-6 (4) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connector, making contact in the bridge shaft (5) 2.3 mm ∅ test connector 1), consisting of metal part and red insulating sleeve (6) Reducing plug ISH 4/0,5 ISH 4/1 nt (3) Plug-in bridge, for cross connections in the terminal center co (2) Insulating stop sleeve, prevents unintentional clamping of insulation in the case of smaller cross sections gray Cross section range: 0.25-0.5 mm2 black 0.75-1 mm2 s. gray m Type ) Further colors are available on request. PHOENIX CONTACT page 7 of 7 6.2 / 66 / 2.2 43 / 50.5 36 / 6 140 6/3 III / I 0.5 - 4 0.5 - 4 0.5 - 1 10 A4 PA V0 – –  PHOENIX CONTACT 01.03.01 TNR: 5125058-00 http://www.phoenixcontact.com STN 4