3033113

https://www.phoenixcontact.com/us/products/3033113 N disconnect terminal block - UKN 16 N BU - 3033113 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) N disconnect terminal block, Special and hybrid connection, Cross section:  2.5 mm² - 25 mm², AWG: 12 - 4, Width: 12.2 mm, Color: blue, Mounting type: NS 35/7,5, NS 35/15, NS 32 Key commercial data Packing unit 11 GTIN Weight per Piece (excluding packing) 25.42 GRM Custom tariff number 85369010 Country of origin Greece Technical data General Number of levels 1 Number of connections 2 Color blue Insulating material PA Inflammability class according to UL 94 V2 Maximum load current 90 A (with 25 mm² conductor cross section) Current carrying capacity of the neutral busbar 140 A Rated surge voltage 6 kV Pollution degree 3 Surge voltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 90 A Nominal voltage UN 400 V Open side panel ja 19.11.2013   Page 1 / 13 https://www.phoenixcontact.com/us/products/3033113 N disconnect terminal block - UKN 16 N BU - 3033113 Technical data Dimensions Width 12.2 mm Length 43.5 mm Height NS 35/7,5 54 mm Height NS 35/15 61.5 mm Height NS 32 59 mm Connection data Note Terminal point Conductor cross section solid min. 2.5 mm² Conductor cross section solid max. 25 mm² Conductor cross section stranded min. 4 mm² Conductor cross section stranded max. 16 mm² Conductor cross section AWG/kcmil min. 12 Conductor cross section AWG/kcmil max 4 Conductor cross section stranded, with ferrule without plastic sleeve min. 1.5 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 16 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 1.5 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 16 mm² 2 conductors with same cross section, solid min. 1.5 mm² 2 conductors with same cross section, solid max. 6 mm² 2 conductors with same cross section, stranded min. 1.5 mm² 2 conductors with same cross section, stranded max. 4 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 6 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.75 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 10 mm² sleeve, max. Connection method Special and hybrid connection Stripping length 11 mm Screw thread M4 Tightening torque, min 1.5 Nm Tightening torque max 1.8 Nm 19.11.2013   Page 2 / 13 https://www.phoenixcontact.com/us/products/3033113 N disconnect terminal block - UKN 16 N BU - 3033113 Classifications eCl@ss eCl@ss 4.0 27141117 eCl@ss 4.1 27141117 eCl@ss 5.0 27141138 eCl@ss 5.1 27141138 eCl@ss 6.0 27141138 eCl@ss 7.0 27141138 eCl@ss 8.0 27141138 ETIM ETIM 2.0 EC001257 ETIM 3.0 EC001257 ETIM 4.0 EC001257 ETIM 5.0 EC001257 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals GOST / GOST Ex Approvals Approvals submitted Approval details 19.11.2013   Page 3 / 13 https://www.phoenixcontact.com/us/products/3033113 N disconnect terminal block - UKN 16 N BU - 3033113 Approvals GOST  GOST  Accessories Accessories End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     19.11.2013   Page 4 / 13 https://www.phoenixcontact.com/us/products/3033113 N disconnect terminal block - UKN 16 N BU - 3033113 Accessories End clamp - E/UK - 1201442 End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail     End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     End cover End cover - D-UK 16 BU - 3006108 End cover, Length: 42.5 mm, Width: 1.5 mm, Height: 54 mm, Color: blue     Labeled terminal marker Zack marker strip - ZB 10 CUS - 0824941 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm     Marker for terminal blocks - UC-TM 10 CUS - 0824605 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 9.6 x 10.5 mm     19.11.2013   Page 5 / 13 https://www.phoenixcontact.com/us/products/3033113 N disconnect terminal block - UKN 16 N BU - 3033113 Accessories Marker for terminal blocks - UCT-TM 10 CUS - 0829623 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 8.9 x 9.6 mm     Mounting rail DIN rail - NS 32 PERF 2000MM - 1201002 G-profile DIN rail, material: Steel, perforated, height 15 mm, width 32 mm, length 2 m     DIN rail - NS 32 UNPERF 2000MM - 1201015 G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m     DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     19.11.2013   Page 6 / 13 https://www.phoenixcontact.com/us/products/3033113 N disconnect terminal block - UKN 16 N BU - 3033113 Accessories DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     19.11.2013   Page 7 / 13 https://www.phoenixcontact.com/us/products/3033113 N disconnect terminal block - UKN 16 N BU - 3033113 Accessories DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35)     19.11.2013   Page 8 / 13 https://www.phoenixcontact.com/us/products/3033113 N disconnect terminal block - UKN 16 N BU - 3033113 Accessories DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm     DIN rail - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m     19.11.2013   Page 9 / 13 https://www.phoenixcontact.com/us/products/3033113 N disconnect terminal block - UKN 16 N BU - 3033113 Accessories End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m     Neutral conductor rail Neutral busbar - NLS-CU 3/10 SN 1000MM - 0402174 PEN conductor busbar, 3mm x 10 mm, length: 1000 mm     Pick-off terminal block Power terminal block - EK 135 - 0401023 Power terminal block, Connection method Screw connection, Load current : 125 A, Cross section:  0.75 mm² - 35 mm², Width: 12 mm, Color: aluminum     Power terminal block - EK 116 - 0401010 Power terminal block, Connection method Screw connection, Load current : 76 A, Cross section:  0.5 mm² - 16 mm², Width: 8 mm, Color: aluminum     19.11.2013   Page 10 / 13 https://www.phoenixcontact.com/us/products/3033113 N disconnect terminal block - UKN 16 N BU - 3033113 Accessories Screwdriver tools Screwdriver - SZS 1,0X4,0 VDE - 1205066 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip     Support Support bracket - UAB - 3032428 Support bracket, Width: 2 mm, Color: blue     Support bracket - AB/NS - 1201141 Support bracket, for insulated mounting of DIN rails in insulated systems, plastic, 21 mm high     Terminal marking Marker cards - SBS10:UNBEDRUCKT - 1007248 Marker cards, Card, white, Unlabeled, Can be labeled with: Plotter, Perforated, Mounting type: Snap into tall marker groove, Snap into flat marker groove, For terminal block width: 10 mm, Lettering field: 6 x 10.1 mm     19.11.2013   Page 11 / 13 https://www.phoenixcontact.com/us/products/3033113 N disconnect terminal block - UKN 16 N BU - 3033113 Accessories Zack marker strip - ZB 10:UNBEDRUCKT - 1053001 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 10.5 x 10.15 mm     Marker for terminal blocks - UC-TM 10 - 0818069 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 9.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 10 - 0829142 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 8.9 x 9.6 mm     Additional products Connection terminal block - AKG 16 BU - 0423014 Connection terminal block, Connection method Screw connection, Load current : 76 A, Cross section:  1.5 mm² - 16 mm², Width: 9.8 mm, Color: blue     Connection terminal block - AKG 35 BU - 0424013 Connection terminal block, Connection method Screw connection, Load current : 125 A, Cross section:  2.5 mm² - 35 mm², Width: 14.3 mm, Color: blue     19.11.2013   Page 12 / 13 https://www.phoenixcontact.com/us/products/3033113 N disconnect terminal block - UKN 16 N BU - 3033113 Accessories Branch terminal - IAK 16 - 2715982 Branch terminal, Connection method Screw connection, Cross section:  0.5 mm² - 16 mm², Width: 7.7 mm, Color: gray     © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 19.11.2013   Page 13 / 13