https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Double-level spring-cage terminal block, Connection method: Screw connection, Cross section: 0.14 mm² - 6
mm², AWG: 26 - 10, Width: 6.2 mm, Color: green-yellow, Mounting type: NS 35/7,5, NS 35/15
Product Features
For a clear overview, each terminal point can be labeled
Can be consistently bridged to the STTB 4 standard double-level terminal blocks
Can be bridged in both levels to implement different switching tasks
Key commercial data
Packing unit
11
Minimum order quantity
50 1
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of levels
2
Number of connections
4
Color
green-yellow
Insulating material
PA
Inflammability class according to UL 94
V0
Maximum load current
36 A (with 6 mm² conductor cross section)
Rated surge voltage
6 kV
Pollution degree
3
Surge voltage category
III
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-2
19.11.2013 Page 1 / 15
https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Technical data
General
Nominal current IN
(with 4 mm² conductor cross section)
Open side panel
ja
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s ) /Hz
Acceleration
0.8 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Oscillation, broadband noise test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Temperature index, insulating material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Static insulating material application in cold
-60 °C
2 2
Dimensions
Width
6.2 mm
Length
81 mm
Height NS 35/7,5
55.5 mm
Height NS 35/15
63 mm
End cover width
2.2 mm
Connection data
Connection method
Screw connection
Stripping length
10 mm
Internal cylindrical gage
A4
Tightening torque, min
0.6 Nm
Tightening torque max
0.8 Nm
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
6 mm²
19.11.2013 Page 2 / 15
https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Technical data
Connection data
Conductor cross section stranded min.
0.14 mm²
Conductor cross section stranded max.
6 mm²
Conductor cross section AWG/kcmil min.
26
Conductor cross section AWG/kcmil max
10
Conductor cross section stranded, with ferrule without plastic sleeve min.
0.14 mm²
Value
0.14 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max.
4 mm²
Value
4 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min.
0.14 mm²
Value
0.14 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max.
4 mm²
Value
4 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.14 mm²
Value
0.14 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
Value
1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
Value
0.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
2.5 mm²
sleeve, max.
Value
2.5 mm²
Classifications
eCl@ss
eCl@ss 4.0
27141121
eCl@ss 4.1
27141121
eCl@ss 5.0
27141120
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
19.11.2013 Page 3 / 15
https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Classifications
eCl@ss
eCl@ss 8.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000901
ETIM 5.0
EC000901
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
GOST
Ex Approvals
Approvals submitted
Approval details
GOST
Accessories
Accessories
Bridge
19.11.2013 Page 4 / 15
https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Accessories
Plug-in bridge - FBS 2-6 - 3030336
Plug-in bridge, Number of positions: 2, Color: red
Plug-in bridge - FBS 3-6 - 3030242
Plug-in bridge, Number of positions: 3, Color: red
Plug-in bridge - FBS 4-6 - 3030255
Plug-in bridge, Number of positions: 4, Color: red
Plug-in bridge - FBS 5-6 - 3030349
Plug-in bridge, Number of positions: 5, Color: red
Plug-in bridge - FBS 10-6 - 3030271
Plug-in bridge, Number of positions: 10, Color: red
19.11.2013 Page 5 / 15
https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Accessories
Plug-in bridge - FBS 20-6 - 3030365
Plug-in bridge, Number of positions: 20, Color: red
Plug-in bridge - FBS 50-6 - 3032224
Plug-in bridge, Number of positions: 50, Color: red
Documentation
Mounting material - ST-IL - 3039900
Operating decal for the ST terminal block
End cover
End cover - D-STTBU 4 - 3033207
End cover, Length: 81 mm, Width: 2.2 mm, Height: 54 mm, Color: gray
Spacer plate - DP PS-6 - 3036738
Spacer plate, Color: red
19.11.2013 Page 6 / 15
https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Accessories
Insulating sleeve
Insulating sleeve - ISH 4/0,5 - 3002885
Insulating sleeve, Color: gray
Insulating sleeve - ISH 4/1,0 - 3002898
Insulating sleeve, Color: black
Labeled terminal marker
Warning cover - WST 4 - 3030954
Warning cover, Strip, yellow, labeled, Mounting type: Plug in, Lettering field: 4.5 x 5.55 mm
Zack marker strip - ZB 6 CUS - 0824992
Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into
tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
19.11.2013 Page 7 / 15
https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Accessories
Marker for terminal blocks - UC-TM 6 CUS - 0824589
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Zack Marker strip, flat - ZBF 6 CUS - 0825027
Zack Marker strip, flat, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap
into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm
Marker for terminal blocks - UC-TMF 6 CUS - 0824646
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 6 CUS - 0829665
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 5.4 x 4.7 mm
Marker carriers
19.11.2013 Page 8 / 15
https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Accessories
Marker carriers - STP 5-2 - 0800967
Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2.5 and STTB 4, labeled with ZB 5
or ZBF 5
Mounting rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
19.11.2013 Page 9 / 15
https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Accessories
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
Partition plate
19.11.2013 Page 10 / 15
https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Accessories
Partition plate - ATP-STTB 4 - 3030747
Partition plate, Length: 88.7 mm, Width: 2 mm, Height: 53 mm, Color: gray
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For
terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
19.11.2013 Page 11 / 15
https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Accessories
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 6.2
mm, Lettering field: 5.6 x 10.5 mm
Zack Marker strip, flat - ZBF 6:UNBEDRUCKT - 0808710
Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove,
For terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm
Marker for terminal blocks - UC-TMF 6 - 0818140
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 6 - 0828746
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into flat marker groove, For terminal block width: 6.2
mm, Lettering field: 5.4 x 4.7 mm
Test plug terminal block
Test adapter - PAI-4-FIX-5/6 BU - 3035975
Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Blue
19.11.2013 Page 12 / 15
https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Accessories
Test adapter - PAI-4-FIX-5/6 OG - 3035974
Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Orange
Test adapter - PAI-4-FIX-5/6 YE - 3035977
Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Yellow
Test adapter - PAI-4-FIX-5/6 RD - 3035976
Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Red
Test adapter - PAI-4-FIX-5/6 GN - 3035978
Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Green
Test adapter - PAI-4-FIX-5/6 BK - 3035980
Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Black
19.11.2013 Page 13 / 15
https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Accessories
Test adapter - PAI-4-FIX-5/6 GY - 3035982
Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Gray
Test adapter - PAI-4-FIX-5/6 VT - 3035979
Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Violet
Test adapter - PAI-4-FIX-5/6 BN - 3035981
Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Brown
Test adapter - PS-6 - 3030996
Test adapter, Color: red
Test plugs - PS-6/2,3MM RD - 3038736
Test plugs, Color: red
Warning label printed
19.11.2013 Page 14 / 15
https://www.phoenixcontact.com/us/products/3033171
Double-level spring-cage terminal block - STTBU 4-PE - 3033171
Accessories
Warning label - WS UT 4 - 3047332
Warning sign for UT terminal blocks
Drawings
Circuit diagram
© Phoenix Contact 2013 - all rights reserved
http://www.phoenixcontact.com
19.11.2013 Page 15 / 15