3033184

https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Double-level terminal block, With equipotential bonder, nom. voltage: 500 V, nominal current: 30 A, connection method: Spring-cage connection, Screw connection, number of connections: 4, cross section: 0.08 mm² - 6 mm², AWG: 28 - 10, width: 6.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15 Your advantages  For a clear overview, each terminal point can be labeled  Can be bridged in both levels to implement different switching tasks  Can be consistently bridged to the STTB 4 standard double-level terminal blocks Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356148177 Weight per Piece (excluding packing) 19.200 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 2 Number of connections 4 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 06/27/2020   Page 1 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Technical data General Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.02 W (the value is multiplied when connecting multiple levels) Ambient temperature (operation) -60 °C ... 85 °C Ambient temperature (storage/transport) -25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C) Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 °C ... 70 °C Ambient temperature (actuation) -5 °C ... 70 °C Connection method Spring-cage connection Connection in acc. with standard IEC 60947-7-1 Maximum load current 36 A (the maximum load current must not be exceeded by the total current of all connected conductors) Nominal current IN 30 A Nominal voltage UN 500 V Connection method Screw connection Connection in acc. with standard IEC 60947-7-1 Maximum load current 36 A (with 6 mm² conductor cross section) 30 A (with 4 mm² conductor cross section) 22 A (with a 2.5 mm² conductor cross section) Nominal current IN 30 A (with 4 mm² conductor cross section) Nominal voltage UN 500 V Open side panel Yes Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 7.3 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 4 mm² / 0.9 kg 06/27/2020   Page 2 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Technical data General 6 mm² / 1.4 kg 0.08 mm² / 0.1 kg 4 mm² / 0.9 kg 6 mm² / 1.4 kg Tensile test result Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Conductor cross section tensile test 0.08 mm² Tractive force setpoint 5N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 4 mm² Short-time current 0.48 kA Conductor cross section short circuit testing 6 mm² Short-time current 0.72 kA Result of aging test Test passed Ageing test for screwless modular terminal block temperature cycles 192 Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 1.857 (m/s ) /Hz Acceleration 0,8 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed 2 2 06/27/2020   Page 3 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Technical data General Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 6.2 mm Length 81 mm Height NS 35/7,5 55.5 mm Height NS 35/15 63 mm End cover width 2.2 mm Connection data Connection method Spring-cage connection Connection in acc. with standard IEC 60947-7-1 Stripping length 8 mm ... 10 mm Conductor cross section solid min. 0.08 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 28 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.08 mm² Conductor cross section flexible max. 4 mm² Min. AWG conductor cross section, flexible 28 Max. AWG conductor cross section, flexible 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² 06/27/2020   Page 4 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Technical data Connection data Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm² Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1 mm² Connection method Screw connection Connection in acc. with standard IEC 60947-7-1 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Stripping length 8 mm ... 10 mm Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.14 mm² Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 1.5 mm² Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm² Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 2.5 mm² Standards and Regulations Connection in acc. with standard IEC 60947-7-1 06/27/2020   Page 5 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Technical data Standards and Regulations IEC 60947-7-1 Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27141120 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 06/27/2020   Page 6 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Classifications eCl@ss eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals EAC / EAC Ex Approvals Approval details EAC      RU CDE.A*30.B.01742 06/27/2020   Page 7 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Approvals EAC      RU CDE.BL08.B.00644 Accessories Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     06/27/2020   Page 8 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     Documentation 06/27/2020   Page 9 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories Mounting material - ST-IL - 3039900 Operating decal for the ST terminal block     End block End clamp - E/AL-NS 35 - 1201662 End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm, color: aluminum     End cover End cover - D-STTBU 4 - 3033207 End cover, length: 81 mm, width: 2.2 mm, height: 54 mm, color: gray     Insulating sleeve Insulating sleeve - ISH 4/0,5 - 3002885 Insulating sleeve, color: gray     06/27/2020   Page 10 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories Insulating sleeve - ISH 4/1,0 - 3002898 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 3-6 - 3030242 Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red     Plug-in bridge - FBS 4-6 - 3030255 Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red     Plug-in bridge - FBS 5-6 - 3030349 Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red     06/27/2020   Page 11 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories Plug-in bridge - FBS 6-6 - 1008238 Plug-in bridge, One side not fully isolated, pitch: 6.2 mm, width: 35.5 mm, number of positions: 6, color: red     Plug-in bridge - FBS 10-6 - 3030271 Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red     Plug-in bridge - FBS 20-6 - 3030365 Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red     Plug-in bridge - FBS 50-6 - 3032224 Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: red     Plug-in bridge - FBSR 2-6 - 3033715 Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red     06/27/2020   Page 12 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories Plug-in bridge - FBSR 3-6 - 3001594 Plug-in bridge, pitch: 6.2 mm, number of positions: 3, color: red     Plug-in bridge - FBSR 4-6 - 3001595 Plug-in bridge, pitch: 6.2 mm, number of positions: 4, color: red     Plug-in bridge - FBSR 5-6 - 3001596 Plug-in bridge, pitch: 6.2 mm, number of positions: 5, color: red     Plug-in bridge - FBSR 10-6 - 3033716 Plug-in bridge, pitch: 6.2 mm, number of positions: 10, color: red     Plug-in bridge - FBS 2-6 BU - 3036932 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue     06/27/2020   Page 13 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories Plug-in bridge - FBS 3-6 BU - 3036945 Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue     Plug-in bridge - FBS 4-6 BU - 3036958 Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue     Plug-in bridge - FBS 5-6 BU - 3036961 Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue     Plug-in bridge - FBS 10-6 BU - 3032198 Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue     Plug-in bridge - FBS 20-6 BU - 3032208 Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue     06/27/2020   Page 14 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories Plug-in bridge - FBS 50-6 BU - 3032211 Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue     Labeled terminal marker Warning cover - WST 4 - 3030954 Warning cover, Strip, yellow, labeled, mounting type: plug in, for terminal block width: 6.2 mm, lettering field size: 4.5 x 5.55 mm, Number of individual labels: 5     Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     06/27/2020   Page 15 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - ZB 6,LGS:U-N - 1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60     06/27/2020   Page 16 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories Zack Marker strip, flat - ZBF 6 CUS - 0825027 Zack Marker strip, flat, Strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TMF 6 CUS - 0824646 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 5.1 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TMF 6 CUS - 0829665 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.4 x 4.7 mm, Number of individual labels: 60     Zack Marker strip, flat - ZBF 6,LGS:FORTL.ZAHLEN - 0808749 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm, Number of individual labels: 10     Zack Marker strip, flat - ZBF 6,QR:FORTL.ZAHLEN - 0808765 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm, Number of individual labels: 10     06/27/2020   Page 17 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories Zack Marker strip, flat - ZBF 6,LGS:GERADE ZAHLEN - 0810834 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ... 100, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm, Number of individual labels: 10     Zack Marker strip, flat - ZBF 6,LGS:UNGERADE ZAHLEN - 0810876 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm, Number of individual labels: 10     Marker carriers Marker carriers - STP 5-2 - 0800967 Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4 can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5     Partition plate Partition plate - ATP-STTB 4 - 3030747 Partition plate, length: 88.7 mm, width: 2 mm, height: 53 mm, color: gray     Screwdriver tools 06/27/2020   Page 18 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Actuation tool - ST-BW - 1207608 Actuation tool, for all 2.5 mm² - 4.0 mm² spring-cages     Short-circuit connector Short-circuit connector - FBSRH 2-6 - 3033812 Short-circuit connector, pitch: 6.2 mm, number of positions: 2, color: red     Terminal marking Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     06/27/2020   Page 19 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60     Zack Marker strip, flat - ZBF 6:UNBEDRUCKT - 0808710 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TMF 6 - 0818140 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 5.1 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TMF 6 - 0828746 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.4 x 4.7 mm, Number of individual labels: 60     Test plug terminal block 06/27/2020   Page 20 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories Test plugs - PS-6 - 3030996 Test plugs, Modular test plug, color: red     Test plugs - PS-6/2,3MM RD - 3038736 Test plugs, color: red     Test socket Test adapter - PAI-4-FIX-5/6 BU - 3035975 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 OG - 3035974 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 YE - 3035977 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     06/27/2020   Page 21 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories Test adapter - PAI-4-FIX-5/6 RD - 3035976 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GN - 3035978 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BK - 3035980 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GY - 3035982 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 VT - 3035979 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     06/27/2020   Page 22 / 23 https://www.phoenixcontact.com/us/products/3033184 Double-level terminal block - STTBU 4-PV - 3033184 Accessories Test adapter - PAI-4-FIX-5/6 BN - 3035981 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 WH - 3035983 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Warning label printed Warning label - WS UT 4 - 3047332 Warning sign for UT terminal blocks     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 06/27/2020   Page 23 / 23