https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Direct connection ground terminal block, connection method: Leg spring connection, number of connections: 2,
cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, width: 5.2 mm, color: green-yellow, mounting type: NS 35/7,5, NS
35/15
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4017918977467
Weight per Piece (excluding packing)
8.910 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of levels
1
Number of connections
2
Color
green-yellow
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Open side panel
Yes
06/27/2020 Page 1 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Technical data
General
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
0.02 g²/Hz
Acceleration
0,8 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
5.2 mm
End cover width
2.2 mm
Length
48.5 mm
Height NS 35/7,5
36.5 mm
Height NS 35/15
44 mm
Connection data
Note
Please observe the current carrying capacity of the DIN rails.
Connection
1 level
Connection method
Leg spring connection
06/27/2020 Page 2 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Technical data
Connection data
Stripping length
8 mm ... 10 mm
Connection in acc. with standard
IEC 60947-7-2
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Min. AWG conductor cross section, flexible
24
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules,
with plastic sleeve, maximum
0.5 mm²
Connection in acc. with standard
IEC/EN 60079-7
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Internal cylindrical gage
A3
Standards and Regulations
Connection in acc. with standard
CUL
IEC 60947-7-2
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
06/27/2020 Page 3 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141141
eCl@ss 8.0
27141141
eCl@ss 9.0
27141141
ETIM
ETIM 2.0
EC000901
ETIM 3.0
EC000901
ETIM 4.0
EC000901
ETIM 5.0
EC000901
ETIM 6.0
EC000901
ETIM 7.0
EC000901
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
06/27/2020 Page 4 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
Accessories
Bridge
Wire bridge - FBSW 2-5/250MM - 3030172
Wire bridge, length: 250 mm, width: 5.1 mm, number of positions: 1, color: red/black
Wire bridge - FBSW 2-5/60MM - 3030170
Wire bridge, length: 60 mm, width: 5.1 mm, number of positions: 1, color: red/black
Wire bridge - FBSW 2-5/110MM - 3030171
Wire bridge, length: 110 mm, width: 5.1 mm, number of positions: 1, color: red/black
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
06/27/2020 Page 5 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
06/27/2020 Page 6 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
06/27/2020 Page 7 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
06/27/2020 Page 8 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - E/AL-NS 35 - 1201662
End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm,
color: aluminum
End cover
End cover - D-ST 2,5 - 3030417
End cover, length: 48.6 mm, width: 2.2 mm, height: 29.1 mm, color: gray
06/27/2020 Page 9 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
End cover - D-ST 2,5-0,8 OG - 3030511
End cover, length: 48.6 mm, width: 0.8 mm, height: 29 mm, color: orange
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
06/27/2020 Page 10 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Insulating sleeve - ISH 2,5/0,2 - 3002843
Insulating sleeve, color: white
Insulating sleeve - ISH 2,5/0,5 - 3002856
Insulating sleeve, color: gray
06/27/2020 Page 11 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
Insulating sleeve - ISH 2,5/1,0 - 3002869
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-5 - 3030161
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 9 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-5 - 3030174
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 14.2 mm, number of positions: 3, color: red
Plug-in bridge - FBS 4-5 - 3030187
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 19.4 mm, number of positions: 4, color: red
Plug-in bridge - FBS 5-5 - 3030190
Plug-in bridge, pitch: 5.2 mm, length: 23 mm, width: 24.6 mm, number of positions: 5, color: red
06/27/2020 Page 12 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
Plug-in bridge - FBS 10-5 - 3030213
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 50.6 mm, number of positions: 10, color: red
Plug-in bridge - FBS 20-5 - 3030226
Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: red
Plug-in bridge - FBS 50-5 - 3038930
Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: red
Plug-in bridge - FBS 2-5 BU - 3036877
Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 3-5 BU - 3036880
Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: blue
06/27/2020 Page 13 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
Plug-in bridge - FBS 4-5 BU - 3036893
Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-5 BU - 3036903
Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 10-5 BU - 3036916
Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: blue
Plug-in bridge - FBS 20-5 BU - 3036929
Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: blue
Plug-in bridge - FBS 50-5 BU - 3032114
Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: blue
Labeled terminal marker
06/27/2020 Page 14 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
Warning cover - WST 2,5 - 3030941
Warning cover, 5-pos., for terminal width: 5.2 mm
Zack marker strip - ZB 5 CUS - 0824962
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017
Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ...
500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm,
Number of individual labels: 10
Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020
Zack marker strip, white, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15
x 10.5 mm, Number of individual labels: 10
06/27/2020 Page 15 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
Zack marker strip - ZB 5,LGS:L1-N,PE - 1050415
Zack marker strip, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall
marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - UC-TM 5 CUS - 0824581
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual
labels: 96
Marker for terminal blocks - UCT-TM 5 CUS - 0829595
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual
labels: 72
Zack Marker strip, flat - ZBF 5 CUS - 0825025
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels:
10
Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ...
500, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm,
Number of individual labels: 10
06/27/2020 Page 16 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm,
Number of individual labels: 10
Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ...
100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm,
Number of individual labels: 10
Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99,
mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number
of individual labels: 10
Marker for terminal blocks - UC-TMF 5 CUS - 0824638
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 5.1 mm, Number of individual
labels: 96
Marker for terminal blocks - UCT-TMF 5 CUS - 0829658
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.4 x 4.7 mm, Number of individual
labels: 72
Partition plate
06/27/2020 Page 17 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
Partition plate - ATP-ST 4 - 3030721
Partition plate, length: 59.8 mm, width: 2 mm, height: 39 mm, color: gray
Spacer plate - DP PS-5 - 3036725
Spacer plate, length: 22.4 mm, width: 5.2 mm, height: 29 mm, number of positions: 1, color: red
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm, Number of individual labels:
10
Marker for terminal blocks - UC-TM 5 - 0818108
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual labels: 96
06/27/2020 Page 18 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
Marker for terminal blocks - UCT-TM 5 - 0828734
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size:
4.6 x 10.5 mm, Number of individual labels: 72
Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.1 x 5.2 mm, Number of individual
labels: 10
Marker for terminal blocks - UC-TMF 5 - 0818153
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 5.2 mm, lettering field size: 4.6 x 5.1 mm, Number of individual labels: 96
Marker for terminal blocks - UCT-TMF 5 - 0828744
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size:
4.4 x 4.7 mm, Number of individual labels: 72
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
06/27/2020 Page 19 / 20
https://www.phoenixcontact.com/us/products/3034044
Direct connection ground terminal block - DT 2,5-PE - 3034044
Accessories
Test plugs - PS-5 - 3030983
Test plugs, Modular test plug, color: red
Test plugs - PS-5/2,3MM RD - 3038723
Test plugs, color: red
Test socket
Test adapter - PAI-4-N GY - 3032871
4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
06/27/2020 Page 20 / 20
