3035014

https://www.phoenixcontact.com/us/products/3035014 Knife disconnect terminal block - ST 2,5-MT OG - 3035014 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Knife disconnect terminal block, Connection type: Spring-cage connection, Cross section: 0.08 mm² - 4 mm², AWG: 28 - 12, Nominal current: 20 A, Nominal voltage: 400 V, Length: 60.5 mm, Width: 5.2 mm, Color: orange, Assembly: NS 35/7,5, NS 35/15 The figure shows a version of the article Key commercial data Packing unit 11 Minimum order quantity 50 1 Weight per Piece (excluding packing) 8.0 GRM Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 1 Number of connections 2 Color orange Insulating material PA Inflammability class according to UL 94 V0 Maximum load current 20 A (with 4 mm² conductor cross section) Rated surge voltage 6 kV Pollution degree 3 Surge voltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 20 A (the maximum load current must not be exceeded by the total current of all connected conductors) Nominal voltage UN 400 V 19.11.2013   Page 1 / 13 https://www.phoenixcontact.com/us/products/3035014 Knife disconnect terminal block - ST 2,5-MT OG - 3035014 Technical data General Open side panel ja Dimensions Width 5.2 mm Length 60.5 mm Height NS 35/7,5 36.5 mm Height NS 35/15 44 mm Connection data Conductor cross section solid min. 0.08 mm² Conductor cross section solid max. 4 mm² Conductor cross section stranded min. 0.08 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 28 Conductor cross section AWG/kcmil max 12 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, max. Connection method Spring-cage connection Minimum stripping length 8 mm Maximum stripping length 10 mm Internal cylindrical gage A3 Classifications eCl@ss eCl@ss 4.0 27141117 eCl@ss 4.1 27141117 eCl@ss 5.0 27141126 eCl@ss 5.1 27141126 eCl@ss 6.0 27141126 eCl@ss 7.0 27141126 eCl@ss 8.0 27141126 ETIM ETIM 2.0 EC000902 19.11.2013   Page 2 / 13 https://www.phoenixcontact.com/us/products/3035014 Knife disconnect terminal block - ST 2,5-MT OG - 3035014 Classifications ETIM ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 5.0 EC000902 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approvals submitted Approval details CSA    B C D mm²/AWG/kcmil 28-12 28-12 28-12 Nominal current IN 16 A 16 A 10 A Nominal voltage UN 300 V 150 V 300 V 19.11.2013   Page 3 / 13 https://www.phoenixcontact.com/us/products/3035014 Knife disconnect terminal block - ST 2,5-MT OG - 3035014 Approvals UL Recognized    B C D mm²/AWG/kcmil 28-12 28-12 28-12 Nominal current IN 16 A 16 A 5A Nominal voltage UN 300 V 300 V 600 V   B C D mm²/AWG/kcmil 28-12 28-12 28-12 Nominal current IN 16 A 16 A 5A Nominal voltage UN 300 V 300 V 600 V cUL Recognized  cULus Recognized  Accessories Accessories Bridge Plug-in bridge - FBS 2-5 - 3030161 Plug-in bridge, Number of positions: 2, Color: red     Plug-in bridge - FBS 3-5 - 3030174 Plug-in bridge, Number of positions: 3, Color: red     19.11.2013   Page 4 / 13 https://www.phoenixcontact.com/us/products/3035014 Knife disconnect terminal block - ST 2,5-MT OG - 3035014 Accessories Plug-in bridge - FBS 4-5 - 3030187 Plug-in bridge, Number of positions: 4, Color: red     Plug-in bridge - FBS 5-5 - 3030190 Plug-in bridge, Number of positions: 5, Color: red     Plug-in bridge - FBS 10-5 - 3030213 Plug-in bridge, Number of positions: 10, Color: red     Plug-in bridge - FBS 20-5 - 3030226 Plug-in bridge, Number of positions: 20, Color: red     Documentation Mounting material - ST-IL - 3039900 Operating decal for the ST terminal block     19.11.2013   Page 5 / 13 https://www.phoenixcontact.com/us/products/3035014 Knife disconnect terminal block - ST 2,5-MT OG - 3035014 Accessories End cover End cover - D-ST 2,5-QUATTRO-MT - 3038590 End cover, Length: 84 mm, Width: 2.2 mm, Height: 36.5 mm, Color: gray     Spacer plate - DP PS-5 - 3036725 Spacer plate, Color: red     Insulating sleeve Insulation stop sleeve - ISH 2,5/0,2 - 3002843 Insulation stop sleeve, Color: white     Insulation stop sleeve - ISH 2,5/0,5 - 3002856 Insulation stop sleeve, Color: gray     Insulation stop sleeve - ISH 2,5/1,0 - 3002869 Insulation stop sleeve, Color: black     19.11.2013   Page 6 / 13 https://www.phoenixcontact.com/us/products/3035014 Knife disconnect terminal block - ST 2,5-MT OG - 3035014 Accessories Labeled terminal marker Warning cover - WST 2,5 - 3030941 Warning cover, 5-pos., for terminal width: 5.2 mm     Zack marker strip - ZB 5 CUS - 0824962 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm     Marker for terminal blocks - UC-TM 5 CUS - 0824581 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 CUS - 0829595 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, Lettering field: 4.6 x 10.5 mm     Zack Marker strip, flat - ZBF 5 CUS - 0825025 Zack Marker strip, flat, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm     19.11.2013   Page 7 / 13 https://www.phoenixcontact.com/us/products/3035014 Knife disconnect terminal block - ST 2,5-MT OG - 3035014 Accessories Marker for terminal blocks - UC-TMF 5 CUS - 0824638 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 5 CUS - 0829658 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.4 x 4.7 mm     Mounting rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     19.11.2013   Page 8 / 13 https://www.phoenixcontact.com/us/products/3035014 Knife disconnect terminal block - ST 2,5-MT OG - 3035014 Accessories DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     19.11.2013   Page 9 / 13 https://www.phoenixcontact.com/us/products/3035014 Knife disconnect terminal block - ST 2,5-MT OG - 3035014 Accessories End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm     Marker for terminal blocks - UC-TM 5 - 0818108 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 - 0828734 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 10.5 mm     19.11.2013   Page 10 / 13 https://www.phoenixcontact.com/us/products/3035014 Knife disconnect terminal block - ST 2,5-MT OG - 3035014 Accessories Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642 Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.1 x 5.2 mm     Marker for terminal blocks - UC-TMF 5 - 0818153 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 5 - 0828744 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.4 x 4.7 mm     Test plug terminal block Test adapter - PAI-4-FIX-5/6 BU - 3035975 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Blue     Test adapter - PAI-4-FIX-5/6 OG - 3035974 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Orange     19.11.2013   Page 11 / 13 https://www.phoenixcontact.com/us/products/3035014 Knife disconnect terminal block - ST 2,5-MT OG - 3035014 Accessories Test adapter - PAI-4-FIX-5/6 YE - 3035977 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Yellow     Test adapter - PAI-4-FIX-5/6 RD - 3035976 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Red     Test adapter - PAI-4-FIX-5/6 GN - 3035978 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Green     Test adapter - PAI-4-FIX-5/6 BK - 3035980 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Black     Test adapter - PAI-4-FIX-5/6 GY - 3035982 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Gray     19.11.2013   Page 12 / 13 https://www.phoenixcontact.com/us/products/3035014 Knife disconnect terminal block - ST 2,5-MT OG - 3035014 Accessories Test adapter - PAI-4-FIX-5/6 VT - 3035979 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Violet     Test adapter - PAI-4-FIX-5/6 BN - 3035981 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Brown     Test adapter - PS-5 - 3030983 Test adapter, Color: red     Test plugs - PS-5/2,3MM RD - 3038723 Test plugs, Color: red     Drawings Circuit diagram © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 19.11.2013   Page 13 / 13