3035205

https://www.phoenixcontact.com/us/products/3035205 Installation level terminal block - STI 2,5-PE/L/LB - 3035205 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Installation level terminal block, Spring-cage connection, Cross section:  0.08 mm² - 4 mm², AWG: 28 - 12, Width: 5.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Product Features  The terminal blocks with knife disconnect zone in the upper level meet the safety requirement regarding individual circuit isolation of DIN VDE 0100-718 Key commercial data Packing unit 11 Weight per Piece (excluding packing) 18.28 GRM Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 3 Number of connections 5 Color gray Insulating material PA Inflammability class according to UL 94 V0 Maximum load current 24 A (with 4 mm² conductor cross section) Rated surge voltage 4 kV Pollution degree 3 Surge voltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 / IEC 60947-7-2 Nominal current IN 24 A Nominal voltage UN 400 V (phase conductor/phase conductor) 19.11.2013   Page 1 / 11 https://www.phoenixcontact.com/us/products/3035205 Installation level terminal block - STI 2,5-PE/L/LB - 3035205 Technical data General 250 V (phase conductor/PE and phase conductor/N) Open side panel ja Number of positions 3 Dimensions Width 5.2 mm Length 97 mm Height NS 35/7,5 50.5 mm Height NS 35/15 58 mm Connection data Conductor cross section solid min. 0.08 mm² Conductor cross section solid max. 4 mm² Conductor cross section stranded min. 0.08 mm² Conductor cross section stranded max. 4 mm² Conductor cross section AWG/kcmil min. 28 Conductor cross section AWG/kcmil max 12 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, max. Connection method Spring-cage connection Stripping length 10 mm Internal cylindrical gage A3 Classifications eCl@ss eCl@ss 4.0 27141125 eCl@ss 4.1 27141125 eCl@ss 5.0 27141125 eCl@ss 5.1 27141125 eCl@ss 6.0 27141125 eCl@ss 7.0 27141125 eCl@ss 8.0 27141125 19.11.2013   Page 2 / 11 https://www.phoenixcontact.com/us/products/3035205 Installation level terminal block - STI 2,5-PE/L/LB - 3035205 Classifications ETIM ETIM 2.0 EC001329 ETIM 3.0 EC001329 ETIM 4.0 EC001329 ETIM 5.0 EC001329 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / GOST / cULus Recognized Ex Approvals Approvals submitted Approval details CSA      mm²/AWG/kcmil 28-12 Nominal current IN 20 A Nominal voltage UN 300 V 19.11.2013   Page 3 / 11 https://www.phoenixcontact.com/us/products/3035205 Installation level terminal block - STI 2,5-PE/L/LB - 3035205 Approvals UL Recognized      mm²/AWG/kcmil 28-12 Nominal current IN 20 A Nominal voltage UN 300 V cUL Recognized      mm²/AWG/kcmil 28-12 Nominal current IN 20 A Nominal voltage UN 300 V GOST  cULus Recognized  Accessories Accessories Documentation Mounting material - ST-IL - 3039900 Operating decal for the ST terminal block     End cover 19.11.2013   Page 4 / 11 https://www.phoenixcontact.com/us/products/3035205 Installation level terminal block - STI 2,5-PE/L/LB - 3035205 Accessories End cover - D-STI/3B - 3038655 End cover, Length: 97 mm, Width: 2.2 mm, Height: 57.8 mm, Color: gray     Insulating sleeve Insulation stop sleeve - ISH 2,5/0,2 - 3002843 Insulation stop sleeve, Color: white     Insulation stop sleeve - ISH 2,5/0,5 - 3002856 Insulation stop sleeve, Color: gray     Insulation stop sleeve - ISH 2,5/1,0 - 3002869 Insulation stop sleeve, Color: black     Labeled terminal marker Zack marker strip - ZB 5 CUS - 0824962 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm     19.11.2013   Page 5 / 11 https://www.phoenixcontact.com/us/products/3035205 Installation level terminal block - STI 2,5-PE/L/LB - 3035205 Accessories Marker for terminal blocks - UC-TM 5 CUS - 0824581 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 CUS - 0829595 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, Lettering field: 4.6 x 10.5 mm     Zack Marker strip, flat - ZBF 5 CUS - 0825025 Zack Marker strip, flat, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm     Marker for terminal blocks - UC-TMF 5 CUS - 0824638 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 5 CUS - 0829658 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.4 x 4.7 mm     Mounting rail 19.11.2013   Page 6 / 11 https://www.phoenixcontact.com/us/products/3035205 Installation level terminal block - STI 2,5-PE/L/LB - 3035205 Accessories DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     19.11.2013   Page 7 / 11 https://www.phoenixcontact.com/us/products/3035205 Installation level terminal block - STI 2,5-PE/L/LB - 3035205 Accessories DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     Partition plate Partition plate - ATP-STI/3 - 3030857 Partition plate, Length: 107 mm, Width: 2.2 mm, Height: 55 mm, Color: gray     19.11.2013   Page 8 / 11 https://www.phoenixcontact.com/us/products/3035205 Installation level terminal block - STI 2,5-PE/L/LB - 3035205 Accessories Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm     Marker for terminal blocks - UC-TM 5 - 0818108 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 - 0828734 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 10.5 mm     Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642 Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.1 x 5.2 mm     19.11.2013   Page 9 / 11 https://www.phoenixcontact.com/us/products/3035205 Installation level terminal block - STI 2,5-PE/L/LB - 3035205 Accessories Marker for terminal blocks - UC-TMF 5 - 0818153 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 5 - 0828744 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.4 x 4.7 mm     Test plug terminal block Test adapter - PAI-4-N GY - 3032871 Test adapter, Color: gray     Additional products Support bracket - AB-STI - 3030828 Support bracket, Bracket for busbars, set every 20 cm, Length: 67 mm, Width: 2 mm, Height: 43 mm, Color: blue     Drawings Circuit diagram 19.11.2013   Page 10 / 11 https://www.phoenixcontact.com/us/products/3035205 © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 19.11.2013   Page 11 / 11