3035691

https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Component terminal block, Connection method: Spring-cage connection, Cross section: 0.2 mm² -10 mm² , AWG: 24 - 10, Width: 8.2 mm, Color: gray Product Features  Connection of standard solar cables up to 10 mm² and with 7.5 mm outside diameter  The DP-STMED 6 spacer plate ensures sufficient spacing between two adjacent diode terminal blocks  A space-saving design of the same shape for compact generator connection boxes  Consistent function shafts enable the simple grouping of individual PV lines using plug-in bridges Key commercial data Packing unit 11 Minimum order quantity 50 1 Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 2 Color gray Insulating material PA Inflammability class according to UL 94 V0 Maximum load current 5A Rated surge voltage 6 kV Pollution degree 3 Surge voltage category III Insulating material group I 19.11.2013   Page 1 / 15 https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Technical data General Nominal current IN 5A Nominal voltage UN 1000 V Open side panel ja Surge voltage test setpoint 9.8 kV Result of surge voltage test Test passed Power frequency withstand voltage setpoint 2.2 kV Result of power-frequency withstand voltage test Test passed Checking the mechanical stability of terminal points (5 x conductor connection) Test passed Bending test conductor cross section/weight 0.2 mm² / 0.2 kg 2 6 mm / 1.4 kg 10 mm² / 2 kg Result of bending test Test passed Conductor cross section tensile test 0.2 mm² Tractive force setpoint 10 N Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Conductor cross section tensile test 10 mm² Tractive force setpoint 90 N Tensile test result Test passed Tight fit on carrier NS 35 Setpoint 5N Result of tight fit test Test passed Result of aging test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Result of thermal test Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 1.857 (m/s ) /Hz Acceleration 0.8 g Test duration per axis 5h Test directions X-, Y- and Z-axis Oscillation, broadband noise test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g 2 2 19.11.2013   Page 2 / 15 https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Technical data General Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Shock test result Test passed Temperature index, insulating material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Dimensions Width 8.2 mm Length 100.8 mm Height NS 35/7,5 60 mm Height NS 35/15 67.5 mm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 10 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 8 Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 6 mm² Min. AWG conductor cross section, stranded 24 Max. AWG conductor cross section, stranded 10 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 6 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 6 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, max. Connection method Spring-cage connection Stripping length 12 mm Internal cylindrical gage A4 Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 19.11.2013   Page 3 / 15 https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Classifications eCl@ss eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 ETIM ETIM 4.0 EC000897 ETIM 5.0 EC000903 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals GOST / GOST Ex Approvals Approvals submitted Approval details GOST  19.11.2013   Page 4 / 15 https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Approvals GOST  Accessories Accessories Bridge Plug-in bridge - FBS 2-8 - 3030284 Plug-in bridge, Number of positions: 2, Color: red     Plug-in bridge - FBS 3-8 - 3030297 Plug-in bridge, Number of positions: 3, Color: red     Plug-in bridge - FBS 4-8 - 3030307 Plug-in bridge, Number of positions: 4, Color: red     Plug-in bridge - FBS 5-8 - 3030310 Plug-in bridge, Number of positions: 5, Color: red     19.11.2013   Page 5 / 15 https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Accessories Plug-in bridge - FBS 10-8 - 3030323 Plug-in bridge, Number of positions: 10, Color: red     Plug-in bridge - FBS 6-8 - 3032470 Plug-in bridge, Number of positions: 6, Color: red     Plug-in bridge - FBS 1/3-8 - 3032363 Plug-in bridge, Number of positions: 3, Pin assignment: 1,3, Color: red     Plug-in bridge - FBS 1/4-8 - 3032376 Plug-in bridge, Number of positions: 4, Pin assignment: 1,4, Color: red     Plug-in bridge - FBS 1/3/5-8 - 3032389 Plug-in bridge, Number of positions: 5, Pin assignment: 1,3,5, Color: red     19.11.2013   Page 6 / 15 https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Accessories Plug-in bridge - FBS 1/4/7/10-8 - 3032402 Plug-in bridge, Number of positions: 10, Pin assignment: 1,4,7,10, Color: red     Plug-in bridge - FBS 1/5-8 - 3032381 Plug-in bridge, Number of positions: 5, Pin assignment: 1,5     Plug-in bridge - FBSRH 2-8 - 3033802 Plug-in bridge, Number of positions: 2, Color: red     Plug-in bridge - FBSRH 3-8 - 3033803 Plug-in bridge, Number of positions: 3, Color: red     Plug-in bridge - FBSRH 4-8 - 3033804 Plug-in bridge, Number of positions: 4, Color: red     19.11.2013   Page 7 / 15 https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Accessories Plug-in bridge - FBSR 2-8 - 3033808 Plug-in bridge, Number of positions: 2, Color: red     Plug-in bridge - FBSR 3-8 - 3001597 Plug-in bridge, Number of positions: 3, Color: red     Plug-in bridge - FBSR 5-8 - 3033809 Plug-in bridge, Number of positions: 5, Color: red     Plug-in bridge - FBSR 10-8 - 3001599 Plug-in bridge, Number of positions: 10, Color: red     Plug-in bridge - FBSR 16-8 - 3033816 Plug-in bridge, Number of positions: 16, Color: red     Cover profile 19.11.2013   Page 8 / 15 https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Accessories Cover profile - AP-ME METER - 3034361 Cover profile, for covering terminal strips, snapped onto APT-ME cover profile carrier or APH-ME end bracket. A cover profile carrier should be positioned at the ends and at intervals of around 40 cm. Length supplied: 1 m     Cover profile - APH-ME - 3034374 Cover profile carrier for mounting on NS 35/7.5 DIN rail for attaching the cover profile AP-ME     Cover profile - APT-ME - 3034358 Cover profile carrier for mounting on NS 35/7.5 DIN rail for attaching the cover profile AP-ME     Covering hood - AH-ME - 3240265 Cover, for the contact- and dust-protected encapsulation of the components     Documentation Mounting material - ST-IL - 3039900 Operating decal for the ST terminal block     19.11.2013   Page 9 / 15 https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Accessories End cover End cover - D-DTME 6 - 3034426 Cover, width: 2.2 mm, color: gray     Spacer plate - DP PS-6 - 3036738 Spacer plate, Color: red     Flange End clamp - CARRIER 35-8 - 3034387 End clamp, Width: 8.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15     Mounting rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     19.11.2013   Page 10 / 15 https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Accessories DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     19.11.2013   Page 11 / 15 https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Accessories DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     Screwdriver tools Screwdriver - SZF 2-0,8X4,0 - 1204520 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.8 x 4.0 x 100 mm, 2component grip, with non-slip grip     Test plug terminal block Test adapter - PAI-4-FIX BU - 3032729 Test adapter, Color: blue     19.11.2013   Page 12 / 15 https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Accessories Test adapter - PAI-4-FIX OG - 3034455 Test adapter, Color: orange     Test adapter - PAI-4-FIX YE - 3032745 Test adapter, Color: yellow     Test adapter - PAI-4-FIX RD - 3032732 Test adapter, Color: red     Test adapter - PAI-4-FIX GN - 3032758 Test adapter, Color: green     Test adapter - PAI-4-FIX BK - 3032774 Test adapter, Color: black     19.11.2013   Page 13 / 15 https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Accessories Test adapter - PAI-4-FIX GY - 3032790 Test adapter, Color: gray     Test adapter - PAI-4-FIX VT - 3032761 Test adapter, Color: violet     Test adapter - PAI-4-FIX BN - 3032787 Test adapter, Color: brown     Test adapter - PS-6 - 3030996 Test adapter, Color: red     Test plugs - PS-6/2,3MM RD - 3038736 Test plugs, Color: red     Drawings 19.11.2013   Page 14 / 15 https://www.phoenixcontact.com/us/products/3035691 Component terminal block - STME 6-DIO/L-R HV - 3035691 Circuit diagram © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 19.11.2013   Page 15 / 15